Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 110 insertions, 0 deletions

diff --git a/tools/bootconfig/scripts/ftrace.sh b/tools/bootconfig/scripts/ftrace.sh
new file mode 100644
index 000000000..cc5250c64
--- /dev/null
+++ b/tools/bootconfig/scripts/ftrace.sh
@@ -0,0 +1,110 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+clear_trace() { # reset trace output
+    echo > trace
+}
+
+disable_tracing() { # stop trace recording
+    echo 0 > tracing_on
+}
+
+enable_tracing() { # start trace recording
+    echo 1 > tracing_on
+}
+
+reset_tracer() { # reset the current tracer
+    echo nop > current_tracer
+}
+
+reset_trigger_file() {
+    # remove action triggers first
+    grep -H ':on[^:]*(' $@ |
+    while read line; do
+        cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["`
+	file=`echo $line | cut -f1 -d:`
+	echo "!$cmd" >> $file
+    done
+    grep -Hv ^# $@ |
+    while read line; do
+        cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["`
+	file=`echo $line | cut -f1 -d:`
+	echo "!$cmd" > $file
+    done
+}
+
+reset_trigger() { # reset all current setting triggers
+    if [ -d events/synthetic ]; then
+        reset_trigger_file events/synthetic/*/trigger
+    fi
+    reset_trigger_file events/*/*/trigger
+}
+
+reset_events_filter() { # reset all current setting filters
+    grep -v ^none events/*/*/filter |
+    while read line; do
+	echo 0 > `echo $line | cut -f1 -d:`
+    done
+}
+
+reset_ftrace_filter() { # reset all triggers in set_ftrace_filter
+    if [ ! -f set_ftrace_filter ]; then
+      return 0
+    fi
+    echo > set_ftrace_filter
+    grep -v '^#' set_ftrace_filter | while read t; do
+	tr=`echo $t | cut -d: -f2`
+	if [ "$tr" = "" ]; then
+	    continue
+	fi
+	if ! grep -q "$t" set_ftrace_filter; then
+		continue;
+	fi
+	name=`echo $t | cut -d: -f1 | cut -d' ' -f1`
+	if [ $tr = "enable_event" -o $tr = "disable_event" ]; then
+	    tr=`echo $t | cut -d: -f2-4`
+	    limit=`echo $t | cut -d: -f5`
+	else
+	    tr=`echo $t | cut -d: -f2`
+	    limit=`echo $t | cut -d: -f3`
+	fi
+	if [ "$limit" != "unlimited" ]; then
+	    tr="$tr:$limit"
+	fi
+	echo "!$name:$tr" > set_ftrace_filter
+    done
+}
+
+disable_events() {
+    echo 0 > events/enable
+}
+
+clear_synthetic_events() { # reset all current synthetic events
+    grep -v ^# synthetic_events |
+    while read line; do
+        echo "!$line" >> synthetic_events
+    done
+}
+
+initialize_ftrace() { # Reset ftrace to initial-state
+# As the initial state, ftrace will be set to nop tracer,
+# no events, no triggers, no filters, no function filters,
+# no probes, and tracing on.
+    disable_tracing
+    reset_tracer
+    reset_trigger
+    reset_events_filter
+    reset_ftrace_filter
+    disable_events
+    [ -f set_event_pid ] && echo > set_event_pid
+    [ -f set_ftrace_pid ] && echo > set_ftrace_pid
+    [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace
+    [ -f set_graph_function ] && echo | tee set_graph_*
+    [ -f stack_trace_filter ] && echo > stack_trace_filter
+    [ -f kprobe_events ] && echo > kprobe_events
+    [ -f uprobe_events ] && echo > uprobe_events
+    [ -f synthetic_events ] && echo > synthetic_events
+    [ -f snapshot ] && echo 0 > snapshot
+    clear_trace
+    enable_tracing
+}