Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 258 insertions, 0 deletions

diff --git a/sound/soc/sof/sof-client-probes-ipc3.c b/sound/soc/sof/sof-client-probes-ipc3.c
new file mode 100644
index 000000000..a3e382d61
--- /dev/null
+++ b/sound/soc/sof/sof-client-probes-ipc3.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2019-2022 Intel Corporation
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+// Code moved to this file by:
+//  Jyri Sarha <jyri.sarha@intel.com>
+//
+
+#include <linux/stddef.h>
+#include <sound/soc.h>
+#include <sound/sof/header.h>
+#include "sof-client.h"
+#include "sof-client-probes.h"
+
+struct sof_probe_dma {
+	unsigned int stream_tag;
+	unsigned int dma_buffer_size;
+} __packed;
+
+struct sof_ipc_probe_dma_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_dma dma[];
+} __packed;
+
+struct sof_ipc_probe_info_params {
+	struct sof_ipc_reply rhdr;
+	unsigned int num_elems;
+	union {
+		DECLARE_FLEX_ARRAY(struct sof_probe_dma, dma);
+		DECLARE_FLEX_ARRAY(struct sof_probe_point_desc, desc);
+	};
+} __packed;
+
+struct sof_ipc_probe_point_add_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	struct sof_probe_point_desc desc[];
+} __packed;
+
+struct sof_ipc_probe_point_remove_params {
+	struct sof_ipc_cmd_hdr hdr;
+	unsigned int num_elems;
+	unsigned int buffer_id[];
+} __packed;
+
+/**
+ * ipc3_probes_init - initialize data probing
+ * @cdev:		SOF client device
+ * @stream_tag:		Extractor stream tag
+ * @buffer_size:	DMA buffer size to set for extractor
+ *
+ * Host chooses whether extraction is supported or not by providing
+ * valid stream tag to DSP. Once specified, stream described by that
+ * tag will be tied to DSP for extraction for the entire lifetime of
+ * probe.
+ *
+ * Probing is initialized only once and each INIT request must be
+ * matched by DEINIT call.
+ */
+static int ipc3_probes_init(struct sof_client_dev *cdev, u32 stream_tag,
+			    size_t buffer_size)
+{
+	struct sof_ipc_probe_dma_add_params *msg;
+	size_t size = struct_size(msg, dma, 1);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_INIT;
+	msg->num_elems = 1;
+	msg->dma[0].stream_tag = stream_tag;
+	msg->dma[0].dma_buffer_size = buffer_size;
+
+	ret = sof_client_ipc_tx_message_no_reply(cdev, msg);
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * ipc3_probes_deinit - cleanup after data probing
+ * @cdev:		SOF client device
+ *
+ * Host sends DEINIT request to free previously initialized probe
+ * on DSP side once it is no longer needed. DEINIT only when there
+ * are no probes connected and with all injectors detached.
+ */
+static int ipc3_probes_deinit(struct sof_client_dev *cdev)
+{
+	struct sof_ipc_cmd_hdr msg;
+
+	msg.size = sizeof(msg);
+	msg.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_DEINIT;
+
+	return sof_client_ipc_tx_message_no_reply(cdev, &msg);
+}
+
+static int ipc3_probes_info(struct sof_client_dev *cdev, unsigned int cmd,
+			    void **params, size_t *num_params,
+			    enum sof_probe_info_type type)
+{
+	size_t max_msg_size = sof_client_get_ipc_max_payload_size(cdev);
+	struct device *dev = &cdev->auxdev.dev;
+	struct sof_ipc_probe_info_params msg = {{{0}}};
+	struct sof_ipc_probe_info_params *reply;
+	size_t bytes, elem_size, payload_size;
+	int ret;
+
+	*params = NULL;
+	*num_params = 0;
+
+	if (type != PROBES_INFO_ACTIVE_PROBES) {
+		dev_err(dev, "%s: info type %u not supported", __func__, type);
+		return -EOPNOTSUPP;
+	}
+
+	reply = kzalloc(max_msg_size, GFP_KERNEL);
+	if (!reply)
+		return -ENOMEM;
+	msg.rhdr.hdr.size = sizeof(msg);
+	msg.rhdr.hdr.cmd = SOF_IPC_GLB_PROBE | cmd;
+
+	ret = sof_client_ipc_tx_message(cdev, &msg, reply, max_msg_size);
+	if (ret < 0 || reply->rhdr.error < 0)
+		goto exit;
+
+	payload_size = reply->rhdr.hdr.size;
+	if (payload_size < offsetof(struct sof_ipc_probe_info_params, dma)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (!reply->num_elems)
+		goto exit;
+
+	if (cmd == SOF_IPC_PROBE_DMA_INFO)
+		elem_size = sizeof(reply->dma[0]);
+	else
+		elem_size = sizeof(reply->desc[0]);
+
+	payload_size -= offsetof(struct sof_ipc_probe_info_params, dma);
+	if (reply->num_elems > payload_size / elem_size) {
+		dev_err(dev, "%s: invalid probe info element count %u\n",
+			__func__, reply->num_elems);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	bytes = reply->num_elems * elem_size;
+	*params = kmemdup(&reply->dma[0], bytes, GFP_KERNEL);
+	if (!*params) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	*num_params = reply->num_elems;
+
+exit:
+	kfree(reply);
+	return ret;
+}
+
+/**
+ * ipc3_probes_points_info - retrieve list of probe points
+ * @cdev:		SOF client device
+ * @desc:	Returned list of active probes
+ * @num_desc:	Returned count of active probes
+ * @type:	Either PROBES_INFO_ACTIVE_PROBES or PROBES_INFO_AVAILABE_PROBES
+ *
+ * If type is PROBES_INFO_ACTIVE_PROBES, host sends PROBE_POINT_INFO
+ * request to obtain list of active probe points, valid for
+ * disconnection when given probe is no longer required.
+ *
+ * Type PROBES_INFO_AVAILABE_PROBES is not yet supported.
+ */
+static int ipc3_probes_points_info(struct sof_client_dev *cdev,
+				   struct sof_probe_point_desc **desc,
+				   size_t *num_desc,
+				   enum sof_probe_info_type type)
+{
+	return ipc3_probes_info(cdev, SOF_IPC_PROBE_POINT_INFO,
+				(void **)desc, num_desc, type);
+}
+
+/**
+ * ipc3_probes_points_add - connect specified probes
+ * @cdev:		SOF client device
+ * @desc:	List of probe points to connect
+ * @num_desc:	Number of elements in @desc
+ *
+ * Dynamically connects to provided set of endpoints. Immediately
+ * after connection is established, host must be prepared to
+ * transfer data from or to target stream given the probing purpose.
+ *
+ * Each probe point should be removed using PROBE_POINT_REMOVE
+ * request when no longer needed.
+ */
+static int ipc3_probes_points_add(struct sof_client_dev *cdev,
+				  struct sof_probe_point_desc *desc,
+				  size_t num_desc)
+{
+	struct sof_ipc_probe_point_add_params *msg;
+	size_t size = struct_size(msg, desc, num_desc);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_desc;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_ADD;
+	memcpy(&msg->desc[0], desc, size - sizeof(*msg));
+
+	ret = sof_client_ipc_tx_message_no_reply(cdev, msg);
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * ipc3_probes_points_remove - disconnect specified probes
+ * @cdev:		SOF client device
+ * @buffer_id:		List of probe points to disconnect
+ * @num_buffer_id:	Number of elements in @desc
+ *
+ * Removes previously connected probes from list of active probe
+ * points and frees all resources on DSP side.
+ */
+static int ipc3_probes_points_remove(struct sof_client_dev *cdev,
+				     unsigned int *buffer_id,
+				     size_t num_buffer_id)
+{
+	struct sof_ipc_probe_point_remove_params *msg;
+	size_t size = struct_size(msg, buffer_id, num_buffer_id);
+	int ret;
+
+	msg = kmalloc(size, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+	msg->hdr.size = size;
+	msg->num_elems = num_buffer_id;
+	msg->hdr.cmd = SOF_IPC_GLB_PROBE | SOF_IPC_PROBE_POINT_REMOVE;
+	memcpy(&msg->buffer_id[0], buffer_id, size - sizeof(*msg));
+
+	ret = sof_client_ipc_tx_message_no_reply(cdev, msg);
+	kfree(msg);
+	return ret;
+}
+
+const struct sof_probes_ipc_ops ipc3_probe_ops =  {
+	.init = ipc3_probes_init,
+	.deinit = ipc3_probes_deinit,
+	.points_info = ipc3_probes_points_info,
+	.points_add = ipc3_probes_points_add,
+	.points_remove = ipc3_probes_points_remove,
+};