Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 190 insertions, 0 deletions

diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c
new file mode 100644
index 000000000..0baf316b0
--- /dev/null
+++ b/sound/soc/sof/loader.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license.  When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation
+//
+// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
+//
+// Generic firmware loader.
+//
+
+#include <linux/firmware.h>
+#include "sof-priv.h"
+#include "ops.h"
+
+int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_pdata *plat_data = sdev->pdata;
+	const char *fw_filename;
+	ssize_t ext_man_size;
+	int ret;
+
+	/* Don't request firmware again if firmware is already requested */
+	if (sdev->basefw.fw)
+		return 0;
+
+	fw_filename = kasprintf(GFP_KERNEL, "%s/%s",
+				plat_data->fw_filename_prefix,
+				plat_data->fw_filename);
+	if (!fw_filename)
+		return -ENOMEM;
+
+	ret = request_firmware(&sdev->basefw.fw, fw_filename, sdev->dev);
+
+	if (ret < 0) {
+		dev_err(sdev->dev,
+			"error: sof firmware file is missing, you might need to\n");
+		dev_err(sdev->dev,
+			"       download it from https://github.com/thesofproject/sof-bin/\n");
+		goto err;
+	} else {
+		dev_dbg(sdev->dev, "request_firmware %s successful\n",
+			fw_filename);
+	}
+
+	/* check for extended manifest */
+	ext_man_size = sdev->ipc->ops->fw_loader->parse_ext_manifest(sdev);
+	if (ext_man_size > 0) {
+		/* when no error occurred, drop extended manifest */
+		sdev->basefw.payload_offset = ext_man_size;
+	} else if (!ext_man_size) {
+		/* No extended manifest, so nothing to skip during FW load */
+		dev_dbg(sdev->dev, "firmware doesn't contain extended manifest\n");
+	} else {
+		ret = ext_man_size;
+		dev_err(sdev->dev, "error: firmware %s contains unsupported or invalid extended manifest: %d\n",
+			fw_filename, ret);
+	}
+
+err:
+	kfree(fw_filename);
+
+	return ret;
+}
+EXPORT_SYMBOL(snd_sof_load_firmware_raw);
+
+int snd_sof_load_firmware_memcpy(struct snd_sof_dev *sdev)
+{
+	int ret;
+
+	ret = snd_sof_load_firmware_raw(sdev);
+	if (ret < 0)
+		return ret;
+
+	/* make sure the FW header and file is valid */
+	ret = sdev->ipc->ops->fw_loader->validate(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: invalid FW header\n");
+		goto error;
+	}
+
+	/* prepare the DSP for FW loading */
+	ret = snd_sof_dsp_reset(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: failed to reset DSP\n");
+		goto error;
+	}
+
+	/* parse and load firmware modules to DSP */
+	if (sdev->ipc->ops->fw_loader->load_fw_to_dsp) {
+		ret = sdev->ipc->ops->fw_loader->load_fw_to_dsp(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev, "Firmware loading failed\n");
+			goto error;
+		}
+	}
+
+	return 0;
+
+error:
+	release_firmware(sdev->basefw.fw);
+	sdev->basefw.fw = NULL;
+	return ret;
+
+}
+EXPORT_SYMBOL(snd_sof_load_firmware_memcpy);
+
+int snd_sof_run_firmware(struct snd_sof_dev *sdev)
+{
+	int ret;
+
+	init_waitqueue_head(&sdev->boot_wait);
+
+	/* (re-)enable dsp dump */
+	sdev->dbg_dump_printed = false;
+	sdev->ipc_dump_printed = false;
+
+	/* create read-only fw_version debugfs to store boot version info */
+	if (sdev->first_boot) {
+		ret = snd_sof_debugfs_buf_item(sdev, &sdev->fw_version,
+					       sizeof(sdev->fw_version),
+					       "fw_version", 0444);
+		/* errors are only due to memory allocation, not debugfs */
+		if (ret < 0) {
+			dev_err(sdev->dev, "snd_sof_debugfs_buf_item failed\n");
+			return ret;
+		}
+	}
+
+	/* perform pre fw run operations */
+	ret = snd_sof_dsp_pre_fw_run(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "failed pre fw run op\n");
+		return ret;
+	}
+
+	dev_dbg(sdev->dev, "booting DSP firmware\n");
+
+	/* boot the firmware on the DSP */
+	ret = snd_sof_dsp_run(sdev);
+	if (ret < 0) {
+		snd_sof_dsp_dbg_dump(sdev, "Failed to start DSP",
+				     SOF_DBG_DUMP_MBOX | SOF_DBG_DUMP_PCI);
+		return ret;
+	}
+
+	/*
+	 * now wait for the DSP to boot. There are 3 possible outcomes:
+	 * 1. Boot wait times out indicating FW boot failure.
+	 * 2. FW boots successfully and fw_ready op succeeds.
+	 * 3. FW boots but fw_ready op fails.
+	 */
+	ret = wait_event_timeout(sdev->boot_wait,
+				 sdev->fw_state > SOF_FW_BOOT_IN_PROGRESS,
+				 msecs_to_jiffies(sdev->boot_timeout));
+	if (ret == 0) {
+		snd_sof_dsp_dbg_dump(sdev, "Firmware boot failure due to timeout",
+				     SOF_DBG_DUMP_REGS | SOF_DBG_DUMP_MBOX |
+				     SOF_DBG_DUMP_TEXT | SOF_DBG_DUMP_PCI);
+		return -EIO;
+	}
+
+	if (sdev->fw_state == SOF_FW_BOOT_READY_FAILED)
+		return -EIO; /* FW boots but fw_ready op failed */
+
+	dev_dbg(sdev->dev, "firmware boot complete\n");
+	sof_set_fw_state(sdev, SOF_FW_BOOT_COMPLETE);
+
+	/* perform post fw run operations */
+	ret = snd_sof_dsp_post_fw_run(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: failed post fw run op\n");
+		return ret;
+	}
+
+	if (sdev->ipc->ops->post_fw_boot)
+		return sdev->ipc->ops->post_fw_boot(sdev);
+
+	return 0;
+}
+EXPORT_SYMBOL(snd_sof_run_firmware);
+
+void snd_sof_fw_unload(struct snd_sof_dev *sdev)
+{
+	/* TODO: support module unloading at runtime */
+	release_firmware(sdev->basefw.fw);
+	sdev->basefw.fw = NULL;
+}
+EXPORT_SYMBOL(snd_sof_fw_unload);