selftests/bpf: Reject graph kptr use after RCU unlockgrafted

Add a sleepable verifier test that loads a graph-node local kptr in an
explicit RCU read-side critical section, then passes its node to
bpf_rbtree_remove() after the section ends.

Before the verifier fix, the stale NON_OWN_REF flag makes the node look like
a live borrowed reference and the program is accepted. After the fix, the
pointer is demoted without NON_OWN_REF and the graph kfunc argument is
rejected.

Also exercise a graph kptr loaded while a spin lock provides implicit RCU
protection. The pointer must be invalidated when the lock is released, which
guards the required ordering between non-owning-reference invalidation and
RCU demotion.

Update the existing fault-protected load test state description. The
post-unlock pointer no longer carries NON_OWN_REF, but remains readable
because the load is rewritten to use BPF_PROBE_MEM.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260904084325.52250-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

1 files changed, 99 insertions, 0 deletions

diff --git a/sound/soc/codecs/wm8510.h b/sound/soc/codecs/wm8510.h
new file mode 100644
index 000000000..1f4354947
--- /dev/null
+++ b/sound/soc/codecs/wm8510.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * wm8510.h  --  WM8510 Soc Audio driver
+ */
+
+#ifndef _WM8510_H
+#define _WM8510_H
+
+/* WM8510 register space */
+
+#define WM8510_RESET		0x0
+#define WM8510_POWER1		0x1
+#define WM8510_POWER2		0x2
+#define WM8510_POWER3		0x3
+#define WM8510_IFACE		0x4
+#define WM8510_COMP			0x5
+#define WM8510_CLOCK		0x6
+#define WM8510_ADD			0x7
+#define WM8510_GPIO			0x8
+#define WM8510_DAC			0xa
+#define WM8510_DACVOL		0xb
+#define WM8510_ADC			0xe
+#define WM8510_ADCVOL		0xf
+#define WM8510_EQ1			0x12
+#define WM8510_EQ2			0x13
+#define WM8510_EQ3			0x14
+#define WM8510_EQ4			0x15
+#define WM8510_EQ5			0x16
+#define WM8510_DACLIM1		0x18
+#define WM8510_DACLIM2		0x19
+#define WM8510_NOTCH1		0x1b
+#define WM8510_NOTCH2		0x1c
+#define WM8510_NOTCH3		0x1d
+#define WM8510_NOTCH4		0x1e
+#define WM8510_ALC1			0x20
+#define WM8510_ALC2			0x21
+#define WM8510_ALC3			0x22
+#define WM8510_NGATE		0x23
+#define WM8510_PLLN			0x24
+#define WM8510_PLLK1		0x25
+#define WM8510_PLLK2		0x26
+#define WM8510_PLLK3		0x27
+#define WM8510_ATTEN		0x28
+#define WM8510_INPUT		0x2c
+#define WM8510_INPPGA		0x2d
+#define WM8510_ADCBOOST		0x2f
+#define WM8510_OUTPUT		0x31
+#define WM8510_SPKMIX		0x32
+#define WM8510_SPKVOL		0x36
+#define WM8510_MONOMIX		0x38
+
+#define WM8510_CACHEREGNUM 	57
+
+/* Clock divider Id's */
+#define WM8510_OPCLKDIV		0
+#define WM8510_MCLKDIV		1
+#define WM8510_ADCCLK		2
+#define WM8510_DACCLK		3
+#define WM8510_BCLKDIV		4
+
+/* DAC clock dividers */
+#define WM8510_DACCLK_F2	(1 << 3)
+#define WM8510_DACCLK_F4	(0 << 3)
+
+/* ADC clock dividers */
+#define WM8510_ADCCLK_F2	(1 << 3)
+#define WM8510_ADCCLK_F4	(0 << 3)
+
+/* PLL Out dividers */
+#define WM8510_OPCLKDIV_1	(0 << 4)
+#define WM8510_OPCLKDIV_2	(1 << 4)
+#define WM8510_OPCLKDIV_3	(2 << 4)
+#define WM8510_OPCLKDIV_4	(3 << 4)
+
+/* BCLK clock dividers */
+#define WM8510_BCLKDIV_1	(0 << 2)
+#define WM8510_BCLKDIV_2	(1 << 2)
+#define WM8510_BCLKDIV_4	(2 << 2)
+#define WM8510_BCLKDIV_8	(3 << 2)
+#define WM8510_BCLKDIV_16	(4 << 2)
+#define WM8510_BCLKDIV_32	(5 << 2)
+
+/* MCLK clock dividers */
+#define WM8510_MCLKDIV_1	(0 << 5)
+#define WM8510_MCLKDIV_1_5	(1 << 5)
+#define WM8510_MCLKDIV_2	(2 << 5)
+#define WM8510_MCLKDIV_3	(3 << 5)
+#define WM8510_MCLKDIV_4	(4 << 5)
+#define WM8510_MCLKDIV_6	(5 << 5)
+#define WM8510_MCLKDIV_8	(6 << 5)
+#define WM8510_MCLKDIV_12	(7 << 5)
+
+struct wm8510_setup_data {
+	int spi;
+	int i2c_bus;
+	unsigned short i2c_address;
+};
+
+#endif