KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 58 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt5575.h b/sound/soc/codecs/rt5575.h
new file mode 100644
index 000000000..752a3c8f5
--- /dev/null
+++ b/sound/soc/codecs/rt5575.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * rt5575.h  --  ALC5575 ALSA SoC audio driver
+ *
+ * Copyright(c) 2025 Realtek Semiconductor Corp.
+ *
+ */
+
+#ifndef __RT5575_H__
+#define __RT5575_H__
+
+#define RT5575_DEVICE_ID	0x10ec5575
+#define RT5575_DSP_MAPPING	0x18000000
+
+#define RT5575_BOOT		0x8004
+#define RT5575_ID		0x8008
+#define RT5575_ID_1		0x800c
+#define RT5575_MIXL_VOL		0x8a14
+#define RT5575_MIXR_VOL		0x8a18
+#define RT5575_PROMPT_VOL	0x8a84
+#define RT5575_SPK01_VOL	0x8a88
+#define RT5575_SPK23_VOL	0x8a8c
+#define RT5575_MIC1_VOL		0x8a98
+#define RT5575_MIC2_VOL		0x8a9c
+#define RT5575_WNC_CTRL		0x80ec
+#define RT5575_MODE_CTRL	0x80f0
+#define RT5575_I2S_RATE_CTRL	0x80f4
+#define RT5575_SLEEP_CTRL	0x80f8
+#define RT5575_ALG_BYPASS_CTRL	0x80fc
+#define RT5575_PINMUX_CTRL_2	0x81a4
+#define RT5575_GPIO_CTRL_1	0x8208
+#define RT5575_DSP_BUS_CTRL	0x880c
+#define RT5575_SW_INT		0x0018
+#define RT5575_DSP_BOOT_ERR	0x8e14
+#define RT5575_DSP_READY	0x8e24
+#define RT5575_DSP_CMD_ADDR	0x8e28
+#define RT5575_EFUSE_DATA_2	0xc638
+#define RT5575_EFUSE_DATA_3	0xc63c
+#define RT5575_EFUSE_PID	0xc660
+
+#define RT5575_BOOT_MASK	0x3
+#define RT5575_BOOT_SPI		0x0
+
+enum {
+	RT5575_AIF1,
+	RT5575_AIF2,
+	RT5575_AIF3,
+	RT5575_AIF4,
+	RT5575_AIFS,
+};
+
+struct rt5575_priv {
+	struct i2c_client *i2c;
+	struct snd_soc_component *component;
+	struct regmap *dsp_regmap, *regmap;
+};
+
+#endif /* __RT5575_H__ */