sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted

alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:

	env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable

But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.

So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.

Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.

nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.

Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com

1 files changed, 200 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt286.h b/sound/soc/codecs/rt286.h
new file mode 100644
index 000000000..4b7a3bd60
--- /dev/null
+++ b/sound/soc/codecs/rt286.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * rt286.h  --  RT286 ALSA SoC audio driver
+ *
+ * Copyright 2011 Realtek Microelectronics
+ * Author: Johnny Hsu <johnnyhsu@realtek.com>
+ */
+
+#ifndef __RT286_H__
+#define __RT286_H__
+
+#define VERB_CMD(V, N, D) ((N << 20) | (V << 8) | D)
+
+#define RT286_AUDIO_FUNCTION_GROUP			0x01
+#define RT286_DAC_OUT1					0x02
+#define RT286_DAC_OUT2					0x03
+#define RT286_ADC_IN1					0x09
+#define RT286_ADC_IN2					0x08
+#define RT286_MIXER_IN					0x0b
+#define RT286_MIXER_OUT1				0x0c
+#define RT286_MIXER_OUT2				0x0d
+#define RT286_DMIC1					0x12
+#define RT286_DMIC2					0x13
+#define RT286_SPK_OUT					0x14
+#define RT286_MIC1					0x18
+#define RT286_LINE1					0x1a
+#define RT286_BEEP					0x1d
+#define RT286_SPDIF					0x1e
+#define RT286_VENDOR_REGISTERS				0x20
+#define RT286_HP_OUT					0x21
+#define RT286_MIXER_IN1					0x22
+#define RT286_MIXER_IN2					0x23
+
+#define RT286_SET_PIN_SFT				6
+#define RT286_SET_PIN_ENABLE				0x40
+#define RT286_SET_PIN_DISABLE				0
+#define RT286_SET_EAPD_HIGH				0x2
+#define RT286_SET_EAPD_LOW				0
+
+#define RT286_MUTE_SFT					7
+
+/* Verb commands */
+#define RT286_GET_PARAM(NID, PARAM) VERB_CMD(AC_VERB_PARAMETERS, NID, PARAM)
+#define RT286_SET_POWER(NID) VERB_CMD(AC_VERB_SET_POWER_STATE, NID, 0)
+#define RT286_SET_AUDIO_POWER RT286_SET_POWER(RT286_AUDIO_FUNCTION_GROUP)
+#define RT286_SET_HPO_POWER RT286_SET_POWER(RT286_HP_OUT)
+#define RT286_SET_SPK_POWER RT286_SET_POWER(RT286_SPK_OUT)
+#define RT286_SET_DMIC1_POWER RT286_SET_POWER(RT286_DMIC1)
+#define RT286_SPK_MUX\
+	VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_SPK_OUT, 0)
+#define RT286_HPO_MUX\
+	VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_HP_OUT, 0)
+#define RT286_ADC0_MUX\
+	VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN1, 0)
+#define RT286_ADC1_MUX\
+	VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN2, 0)
+#define RT286_SET_MIC1\
+	VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_MIC1, 0)
+#define RT286_SET_PIN_HPO\
+	VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_HP_OUT, 0)
+#define RT286_SET_PIN_SPK\
+	VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_SPK_OUT, 0)
+#define RT286_SET_PIN_DMIC1\
+	VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_DMIC1, 0)
+#define RT286_SPK_EAPD\
+	VERB_CMD(AC_VERB_SET_EAPD_BTLENABLE, RT286_SPK_OUT, 0)
+#define RT286_SET_AMP_GAIN_HPO\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0)
+#define RT286_SET_AMP_GAIN_ADC_IN1\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0)
+#define RT286_SET_AMP_GAIN_ADC_IN2\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN2, 0)
+#define RT286_GET_HP_SENSE\
+	VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_HP_OUT, 0)
+#define RT286_GET_MIC1_SENSE\
+	VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_MIC1, 0)
+#define RT286_SET_DMIC2_DEFAULT\
+	VERB_CMD(AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, RT286_DMIC2, 0)
+#define RT286_DACL_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0xa000)
+#define RT286_DACR_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0x9000)
+#define RT286_ADCL_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x6000)
+#define RT286_ADCR_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x5000)
+#define RT286_MIC_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIC1, 0x7000)
+#define RT286_SPOL_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0xa000)
+#define RT286_SPOR_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0x9000)
+#define RT286_HPOL_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0xa000)
+#define RT286_HPOR_GAIN\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0x9000)
+#define RT286_F_DAC_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7000)
+#define RT286_F_RECMIX_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7100)
+#define RT286_REC_MIC_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7000)
+#define RT286_REC_I2S_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7100)
+#define RT286_REC_LINE_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7200)
+#define RT286_REC_BEEP_SWITCH\
+	VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7300)
+#define RT286_DAC_FORMAT\
+	VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_DAC_OUT1, 0)
+#define RT286_ADC_FORMAT\
+	VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_ADC_IN1, 0)
+#define RT286_COEF_INDEX\
+	VERB_CMD(AC_VERB_SET_COEF_INDEX, RT286_VENDOR_REGISTERS, 0)
+#define RT286_PROC_COEF\
+	VERB_CMD(AC_VERB_SET_PROC_COEF, RT286_VENDOR_REGISTERS, 0)
+#define RT286_SET_GPIO_MASK\
+	VERB_CMD(AC_VERB_SET_GPIO_MASK, RT286_AUDIO_FUNCTION_GROUP, 0)
+#define RT286_SET_GPIO_DIRECTION\
+	VERB_CMD(AC_VERB_SET_GPIO_DIRECTION, RT286_AUDIO_FUNCTION_GROUP, 0)
+#define RT286_SET_GPIO_DATA\
+	VERB_CMD(AC_VERB_SET_GPIO_DATA, RT286_AUDIO_FUNCTION_GROUP, 0)
+
+/* Index registers */
+#define RT286_A_BIAS_CTRL1	0x01
+#define RT286_A_BIAS_CTRL2	0x02
+#define RT286_POWER_CTRL1	0x03
+#define RT286_A_BIAS_CTRL3	0x04
+#define RT286_POWER_CTRL2	0x08
+#define RT286_I2S_CTRL1		0x09
+#define RT286_I2S_CTRL2		0x0a
+#define RT286_CLK_DIV		0x0b
+#define RT286_DC_GAIN		0x0d
+#define RT286_POWER_CTRL3	0x0f
+#define RT286_MIC1_DET_CTRL	0x19
+#define RT286_MISC_CTRL1	0x20
+#define RT286_GPIO_CTRL		0x29
+#define RT286_IRQ_CTRL		0x33
+#define RT286_PLL_CTRL1		0x49
+#define RT286_CBJ_CTRL1		0x4f
+#define RT286_CBJ_CTRL2		0x50
+#define RT286_PLL_CTRL		0x63
+#define RT286_DEPOP_CTRL1	0x66
+#define RT286_DEPOP_CTRL2	0x67
+#define RT286_DEPOP_CTRL3	0x68
+#define RT286_DEPOP_CTRL4	0x69
+
+/* SPDIF (0x06) */
+#define RT286_SPDIF_SEL_SFT	0
+#define RT286_SPDIF_SEL_PCM0	0
+#define RT286_SPDIF_SEL_PCM1	1
+#define RT286_SPDIF_SEL_SPOUT	2
+#define RT286_SPDIF_SEL_PP	3
+
+/* RECMIX (0x0b) */
+#define RT286_M_REC_BEEP_SFT	0
+#define RT286_M_REC_LINE1_SFT	1
+#define RT286_M_REC_MIC1_SFT	2
+#define RT286_M_REC_I2S_SFT	3
+
+/* Front (0x0c) */
+#define RT286_M_FRONT_DAC_SFT	0
+#define RT286_M_FRONT_REC_SFT	1
+
+/* SPK-OUT (0x14) */
+#define RT286_M_SPK_MUX_SFT	14
+#define RT286_SPK_SEL_MASK	0x1
+#define RT286_SPK_SEL_SFT	0
+#define RT286_SPK_SEL_F		0
+#define RT286_SPK_SEL_S		1
+
+/* HP-OUT (0x21) */
+#define RT286_M_HP_MUX_SFT	14
+#define RT286_HP_SEL_MASK	0x1
+#define RT286_HP_SEL_SFT	0
+#define RT286_HP_SEL_F		0
+#define RT286_HP_SEL_S		1
+
+/* ADC (0x22) (0x23) */
+#define RT286_ADC_SEL_MASK	0x7
+#define RT286_ADC_SEL_SFT	0
+#define RT286_ADC_SEL_SURR	0
+#define RT286_ADC_SEL_FRONT	1
+#define RT286_ADC_SEL_DMIC	2
+#define RT286_ADC_SEL_BEEP	4
+#define RT286_ADC_SEL_LINE1	5
+#define RT286_ADC_SEL_I2S	6
+#define RT286_ADC_SEL_MIC1	7
+
+#define RT286_SCLK_S_MCLK	0
+#define RT286_SCLK_S_PLL	1
+
+enum {
+	RT286_AIF1,
+	RT286_AIF2,
+	RT286_AIFS,
+};
+
+#endif /* __RT286_H__ */
+