Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 202 insertions, 0 deletions

diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
new file mode 100644
index 000000000..5973c25c2
--- /dev/null
+++ b/sound/firewire/Kconfig
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig SND_FIREWIRE
+	bool "FireWire sound devices"
+	depends on FIREWIRE
+	default y
+	help
+	  Support for IEEE-1394/FireWire/iLink sound devices.
+
+if SND_FIREWIRE && FIREWIRE
+
+config SND_FIREWIRE_LIB
+	tristate
+	select SND_PCM
+	select SND_RAWMIDI
+
+config SND_DICE
+	tristate "DICE-based DACs support"
+	select SND_HWDEP
+	select SND_FIREWIRE_LIB
+	help
+	  Say Y here to include support for devices based on the DICE chip family
+	  (DICE-II/TCD2210(Mini)/TCD2220(Jr.)) which TC Applied Technologies (TCAT) produced.
+	   * Allen and Heath Zed R16
+	   * Alesis iO 14/26 FireWire, MasterControl, MultiMix 8/12/16 FireWire
+	   * Avid Mbox 3 Pro
+	   * FlexRadio Systems FLEX-3000, FLEX-5000
+	   * Focusrite Liquid Saffire 56
+	   * Focusrite Saffire Pro 14, Pro 24, Pro 24 DSP, Pro 26, Pro 40(TCD2220)
+	   * Harman Music Group Lexicon I-ONIX FW810S
+	   * Loud Technologies Mackie Onyx Blackbird, Onyx 820i/1220i/1620i/1640i (latter models)
+	   * M-Audio ProFire 610/2626
+	   * Mytek Stereo192-DSD DAC
+	   * Midas Klark Teknik VeniceF series
+	   * PreSonus FireStudio, FireStudio Mobile, FireStudio Project, FireStudio Tube
+	   * PreSonus StudioLive 16.4.2, 16.0.2, 24.4.2, 32.4.2
+	   * Solid State Logic Duende Classic, Duende Mini
+	   * TC Electronic Studio Konnekt 48, Konnekt 24D, Konnekt Live, Impact Twin
+	   * TC Electronic Digital Konnekt x32, Desktop Konnekt 6
+	   * Weiss Engineering ADC2, Vesta, Minerva, AFI1, DAC1, INT202, DAC202
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-dice.
+
+config SND_OXFW
+	tristate "Oxford Semiconductor FW970/971 chipset support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	  Say Y here to include support for FireWire devices based on
+	  Oxford Semiconductor FW970/971 chipset.
+	   * Griffin Firewave
+	   * LaCie Firewire Speakers
+	   * Behringer F-Control Audio 202
+	   * Mackie(Loud) Onyx-i series (former models)
+	   * Mackie(Loud) Onyx 1640i (former model)
+	   * Mackie(Loud) Onyx Satellite
+	   * Mackie(Loud) Tapco Link.Firewire
+	   * Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
+	   * Mackie(Loud) U.420/U.420d
+	   * TASCAM FireOne
+	   * Stanton Controllers & Systems 1 Deck/Mixer
+	   * APOGEE duet FireWire
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-oxfw.
+
+config SND_ISIGHT
+	tristate "Apple iSight microphone"
+	select SND_FIREWIRE_LIB
+	help
+	  Say Y here to include support for the front and rear microphones
+	  of the Apple iSight web camera.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-isight.
+
+config SND_FIREWORKS
+	tristate "Echo Fireworks board module support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	  Say Y here to include support for FireWire devices based
+	  on Echo Digital Audio Fireworks board:
+	   * Mackie Onyx 400F/1200F
+	   * Echo AudioFire12/8(until 2009 July)
+	   * Echo AudioFire2/4/Pre8/8(since 2009 July)
+	   * Echo Fireworks 8/HDMI
+	   * Gibson Robot Interface Pack/GoldTop
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-fireworks.
+
+config SND_BEBOB
+	tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	 Say Y here to include support for FireWire devices based
+	 on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
+	  * Edirol FA-66/FA-101
+	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
+	  * BridgeCo RDAudio1/Audio5
+	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
+	  * Mackie d.2 (optional FireWire card with DM1000 ASIC)
+	  * Stanton FinalScratch 2 (ScratchAmp)
+	  * Tascam IF-FW/DM
+	  * Behringer XENIX UFX 1204/1604
+	  * Behringer Digital Mixer X32 series (X-UF Card)
+	  * Behringer FCA610/1616
+	  * Apogee Rosetta 200/400 (X-FireWire card)
+	  * Apogee DA/AD/DD-16X (X-FireWire card)
+	  * Apogee Ensemble
+	  * ESI QuataFire 610
+	  * AcousticReality eARMasterOne
+	  * CME MatrixKFW
+	  * Phonic Helix Board 12 MkII/18 MkII/24 MkII
+	  * Phonic Helix Board 12 Universal/18 Universal/24 Universal
+	  * Lynx Aurora 8/16 (LT-FW)
+	  * ICON FireXon
+	  * PrismSound Orpheus/ADA-8XR
+	  * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
+	  * TerraTec EWS MIC2/EWS MIC8
+	  * TerraTec Aureon 7.1 FireWire
+	  * Yamaha GO44/GO46
+	  * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
+	  * M-Audio FireWire410/AudioPhile/Solo
+	  * M-Audio Ozonic/NRV10/ProfireLightBridge
+	  * M-Audio FireWire 1814/ProjectMix IO
+	  * Digidesign Mbox 2 Pro
+	  * ToneWeal FW66
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-bebob.
+
+config SND_FIREWIRE_DIGI00X
+	tristate "Digidesign Digi 002/003 family support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	 Say Y here to include support for Digidesign Digi 002/003 family.
+	  * Digi 002 Console
+	  * Digi 002 Rack
+	  * Digi 003 Console
+	  * Digi 003 Rack
+	  * Digi 003 Rack+
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called snd-firewire-digi00x.
+
+config SND_FIREWIRE_TASCAM
+	tristate "TASCAM FireWire series support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	 Say Y here to include support for TASCAM.
+	  * FW-1884
+	  * FW-1082
+	  * FW-1804
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called snd-firewire-tascam.
+
+config SND_FIREWIRE_MOTU
+	tristate "Mark of the unicorn FireWire series support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	 Say Y here to enable support for FireWire devices which MOTU produced:
+	  * 828
+	  * 896
+	  * 828mk2
+	  * 896hd
+	  * Traveler
+	  * Ultralite
+	  * 8pre
+	  * 828mk3 (FireWire only)
+	  * 828mk3 (Hybrid)
+	  * 896mk3 (FireWire only)
+	  * 896mk3 (Hybrid)
+	  * Ultralite mk3 (FireWire only)
+	  * Ultralite mk3 (Hybrid)
+	  * Traveler mk3
+	  * Audio Express
+	  * Track 16
+	  * 4pre
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called snd-firewire-motu.
+
+config SND_FIREFACE
+	tristate "RME Fireface series support"
+	select SND_FIREWIRE_LIB
+	select SND_HWDEP
+	help
+	 Say Y here to include support for RME fireface series.
+	  * Fireface 400
+	  * Fireface 800
+	  * Fireface UFX
+	  * Fireface UCX
+	  * Fireface 802
+
+endif # SND_FIREWIRE