Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 85 insertions, 0 deletions

diff --git a/security/tomoyo/Kconfig b/security/tomoyo/Kconfig
new file mode 100644
index 000000000..1e0dd1a6d
--- /dev/null
+++ b/security/tomoyo/Kconfig
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SECURITY_TOMOYO
+	bool "TOMOYO Linux Support"
+	depends on SECURITY
+	depends on NET
+	select SECURITYFS
+	select SECURITY_PATH
+	select SECURITY_NETWORK
+	default n
+	help
+	  This selects TOMOYO Linux, pathname-based access control.
+	  Required userspace tools and further information may be
+	  found at <https://tomoyo.sourceforge.net/>.
+	  If you are unsure how to answer this question, answer N.
+
+config SECURITY_TOMOYO_MAX_ACCEPT_ENTRY
+	int "Default maximal count for learning mode"
+	default 2048
+	range 0 2147483647
+	depends on SECURITY_TOMOYO
+	help
+	  This is the default value for maximal ACL entries
+	  that are automatically appended into policy at "learning mode".
+	  Some programs access thousands of objects, so running
+	  such programs in "learning mode" dulls the system response
+	  and consumes much memory.
+	  This is the safeguard for such programs.
+
+config SECURITY_TOMOYO_MAX_AUDIT_LOG
+	int "Default maximal count for audit log"
+	default 1024
+	range 0 2147483647
+	depends on SECURITY_TOMOYO
+	help
+	  This is the default value for maximal entries for
+	  audit logs that the kernel can hold on memory.
+	  You can read the log via /sys/kernel/security/tomoyo/audit.
+	  If you don't need audit logs, you may set this value to 0.
+
+config SECURITY_TOMOYO_OMIT_USERSPACE_LOADER
+	bool "Activate without calling userspace policy loader."
+	default n
+	depends on SECURITY_TOMOYO
+	help
+	  Say Y here if you want to activate access control as soon as built-in
+	  policy was loaded. This option will be useful for systems where
+	  operations which can lead to the hijacking of the boot sequence are
+	  needed before loading the policy. For example, you can activate
+	  immediately after loading the fixed part of policy which will allow
+	  only operations needed for mounting a partition which contains the
+	  variant part of policy and verifying (e.g. running GPG check) and
+	  loading the variant part of policy. Since you can start using
+	  enforcing mode from the beginning, you can reduce the possibility of
+	  hijacking the boot sequence.
+
+config SECURITY_TOMOYO_POLICY_LOADER
+	string "Location of userspace policy loader"
+	default "/sbin/tomoyo-init"
+	depends on SECURITY_TOMOYO
+	depends on !SECURITY_TOMOYO_OMIT_USERSPACE_LOADER
+	help
+	  This is the default pathname of policy loader which is called before
+	  activation. You can override this setting via TOMOYO_loader= kernel
+	  command line option.
+
+config SECURITY_TOMOYO_ACTIVATION_TRIGGER
+	string "Trigger for calling userspace policy loader"
+	default "/sbin/init"
+	depends on SECURITY_TOMOYO
+	depends on !SECURITY_TOMOYO_OMIT_USERSPACE_LOADER
+	help
+	  This is the default pathname of activation trigger.
+	  You can override this setting via TOMOYO_trigger= kernel command line
+	  option. For example, if you pass init=/bin/systemd option, you may
+	  want to also pass TOMOYO_trigger=/bin/systemd option.
+
+config SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING
+	bool "Use insecure built-in settings for fuzzing tests."
+	default n
+	depends on SECURITY_TOMOYO
+	select SECURITY_TOMOYO_OMIT_USERSPACE_LOADER
+	help
+	  Enabling this option forces minimal built-in policy and disables
+	  domain/program checks for run-time policy modifications. Please enable
+	  this option only if this kernel is built for doing fuzzing tests.