Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 117 insertions, 0 deletions

diff --git a/security/ipe/Kconfig b/security/ipe/Kconfig
new file mode 100644
index 000000000..a110a6cd8
--- /dev/null
+++ b/security/ipe/Kconfig
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Integrity Policy Enforcement (IPE) configuration
+#
+
+menuconfig SECURITY_IPE
+	bool "Integrity Policy Enforcement (IPE)"
+	depends on SECURITY && SECURITYFS && AUDIT && AUDITSYSCALL
+	select CRYPTO_LIB_SHA256
+	select PKCS7_MESSAGE_PARSER
+	select SYSTEM_DATA_VERIFICATION
+	select IPE_PROP_DM_VERITY if DM_VERITY
+	select IPE_PROP_DM_VERITY_SIGNATURE if DM_VERITY && DM_VERITY_VERIFY_ROOTHASH_SIG
+	select IPE_PROP_FS_VERITY if FS_VERITY
+	select IPE_PROP_FS_VERITY_BUILTIN_SIG if FS_VERITY && FS_VERITY_BUILTIN_SIGNATURES
+	help
+	  This option enables the Integrity Policy Enforcement LSM
+	  allowing users to define a policy to enforce a trust-based access
+	  control. A key feature of IPE is a customizable policy to allow
+	  admins to reconfigure trust requirements on the fly.
+
+	  If unsure, answer N.
+
+if SECURITY_IPE
+config IPE_BOOT_POLICY
+	string "Integrity policy to apply on system startup"
+	help
+	  This option specifies a filepath to an IPE policy that is compiled
+	  into the kernel. This policy will be enforced until a policy update
+	  is deployed via the $securityfs/ipe/policies/$policy_name/active
+	  interface.
+
+	  If unsure, leave blank.
+
+config IPE_POLICY_SIG_SECONDARY_KEYRING
+	bool "IPE policy update verification with secondary keyring"
+	default y
+	depends on SECONDARY_TRUSTED_KEYRING
+	help
+	  Also allow the secondary trusted keyring to verify IPE policy
+	  updates.
+
+	  If unsure, answer Y.
+
+config IPE_POLICY_SIG_PLATFORM_KEYRING
+	bool "IPE policy update verification with platform keyring"
+	default y
+	depends on INTEGRITY_PLATFORM_KEYRING
+	help
+	  Also allow the platform keyring to verify IPE policy updates.
+
+	  If unsure, answer Y.
+
+menu "IPE Trust Providers"
+
+config IPE_PROP_DM_VERITY
+	bool "Enable support for dm-verity based on root hash"
+	depends on DM_VERITY
+	help
+	  This option enables the 'dmverity_roothash' property within IPE
+	  policies. The property evaluates to TRUE when a file from a dm-verity
+	  volume is evaluated, and the volume's root hash matches the value
+	  supplied in the policy.
+
+config IPE_PROP_DM_VERITY_SIGNATURE
+	bool "Enable support for dm-verity based on root hash signature"
+	depends on DM_VERITY && DM_VERITY_VERIFY_ROOTHASH_SIG
+	help
+	  This option enables the 'dmverity_signature' property within IPE
+	  policies. The property evaluates to TRUE when a file from a dm-verity
+	  volume, which has been mounted with a valid signed root hash,
+	  is evaluated.
+
+	  If unsure, answer Y.
+
+config IPE_PROP_FS_VERITY
+	bool "Enable support for fs-verity based on file digest"
+	depends on FS_VERITY
+	help
+	  This option enables the 'fsverity_digest' property within IPE
+	  policies. The property evaluates to TRUE when a file is fsverity
+	  enabled and its digest matches the supplied digest value in the
+	  policy.
+
+	  if unsure, answer Y.
+
+config IPE_PROP_FS_VERITY_BUILTIN_SIG
+	bool "Enable support for fs-verity based on builtin signature"
+	depends on FS_VERITY && FS_VERITY_BUILTIN_SIGNATURES
+	help
+	  This option enables the 'fsverity_signature' property within IPE
+	  policies. The property evaluates to TRUE when a file is fsverity
+	  enabled and it has a valid builtin signature whose signing cert
+	  is in the .fs-verity keyring.
+
+	  if unsure, answer Y.
+
+endmenu
+
+config SECURITY_IPE_KUNIT_TEST
+	bool "Build KUnit tests for IPE" if !KUNIT_ALL_TESTS
+	depends on KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the IPE KUnit tests.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (https://testanything.org/). Only useful for kernel devs
+	  running KUnit test harness and are not for inclusion into a
+	  production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+endif