Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 122 insertions, 0 deletions

diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
new file mode 100644
index 000000000..1e3bd4464
--- /dev/null
+++ b/security/apparmor/Kconfig
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SECURITY_APPARMOR
+	bool "AppArmor support"
+	depends on SECURITY && NET
+	select AUDIT
+	select SECURITY_PATH
+	select SECURITYFS
+	select SECURITY_NETWORK
+	default n
+	help
+	  This enables the AppArmor security module.
+	  Required userspace tools (if they are not included in your
+	  distribution) and further information may be found at
+	  http://apparmor.wiki.kernel.org
+
+	  If you are unsure how to answer this question, answer N.
+
+config SECURITY_APPARMOR_DEBUG
+	bool "Build AppArmor with debug code"
+	depends on SECURITY_APPARMOR
+	default n
+	help
+	  Build apparmor with debugging logic in apparmor. Not all
+	  debugging logic will necessarily be enabled. A submenu will
+	  provide fine grained control of the debug options that are
+	  available.
+
+config SECURITY_APPARMOR_DEBUG_ASSERTS
+	bool "Build AppArmor with debugging asserts"
+	depends on SECURITY_APPARMOR_DEBUG
+	default y
+	help
+	  Enable code assertions made with AA_BUG. These are primarily
+	  function entry preconditions but also exist at other key
+	  points. If the assert is triggered it will trigger a WARN
+	  message.
+
+config SECURITY_APPARMOR_DEBUG_MESSAGES
+	bool "Debug messages enabled by default"
+	depends on SECURITY_APPARMOR_DEBUG
+	default n
+	help
+	  Set the default value of the apparmor.debug kernel parameter.
+	  When enabled, various debug messages will be logged to
+	  the kernel message buffer.
+
+config SECURITY_APPARMOR_INTROSPECT_POLICY
+	bool "Allow loaded policy to be introspected"
+	depends on SECURITY_APPARMOR
+	default y
+	help
+	  This option selects whether introspection of loaded policy
+	  is available to userspace via the apparmor filesystem. This
+	  adds to kernel memory usage. It is required for introspection
+	  of loaded policy, and check point and restore support. It
+	  can be disabled for embedded systems where reducing memory and
+	  cpu is paramount.
+
+config SECURITY_APPARMOR_HASH
+	bool "Enable introspection of sha256 hashes for loaded profiles"
+	depends on SECURITY_APPARMOR_INTROSPECT_POLICY
+	select CRYPTO_LIB_SHA256
+	default y
+	help
+	  This option selects whether introspection of loaded policy
+	  hashes is available to userspace via the apparmor
+	  filesystem. This option provides a light weight means of
+	  checking loaded policy.  This option adds to policy load
+	  time and can be disabled for small embedded systems.
+
+config SECURITY_APPARMOR_HASH_DEFAULT
+       bool "Enable policy hash introspection by default"
+       depends on SECURITY_APPARMOR_HASH
+       default y
+       help
+	 This option selects whether sha256 hashing of loaded policy
+	 is enabled by default. The generation of sha256 hashes for
+	 loaded policy provide system administrators a quick way to
+	 verify that policy in the kernel matches what is expected,
+	 however it can slow down policy load on some devices. In
+	 these cases policy hashing can be disabled by default and
+	 enabled only if needed.
+
+config SECURITY_APPARMOR_EXPORT_BINARY
+	bool "Allow exporting the raw binary policy"
+	depends on SECURITY_APPARMOR_INTROSPECT_POLICY
+	select ZSTD_COMPRESS
+	select ZSTD_DECOMPRESS
+	default y
+	help
+	  This option allows reading back binary policy as it was loaded.
+	  It increases the amount of kernel memory needed by policy and
+	  also increases policy load time. This option is required for
+	  checkpoint and restore support, and debugging of loaded policy.
+
+config SECURITY_APPARMOR_PARANOID_LOAD
+	bool "Perform full verification of loaded policy"
+	depends on SECURITY_APPARMOR
+	default y
+	help
+	  This options allows controlling whether apparmor does a full
+	  verification of loaded policy. This should not be disabled
+	  except for embedded systems where the image is read only,
+	  includes policy, and has some form of integrity check.
+	  Disabling the check will speed up policy loads.
+
+config SECURITY_APPARMOR_KUNIT_TEST
+	tristate "Build KUnit tests for policy_unpack.c" if !KUNIT_ALL_TESTS
+	depends on KUNIT && SECURITY_APPARMOR
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the AppArmor KUnit tests.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (https://testanything.org/). Only useful for kernel devs
+	  running KUnit test harness and are not for inclusion into a
+	  production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.