staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 162 insertions, 0 deletions

diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh
new file mode 100755
index 000000000..f19369687
--- /dev/null
+++ b/scripts/xz_wrap.sh
@@ -0,0 +1,162 @@
+#!/bin/sh
+# SPDX-License-Identifier: 0BSD
+#
+# This is a wrapper for xz to compress the kernel image using appropriate
+# compression options depending on the architecture.
+#
+# Author: Lasse Collin <lasse.collin@tukaani.org>
+
+# This has specialized settings for the following archs. However,
+# XZ-compressed kernel isn't currently supported on every listed arch.
+#
+#   Arch        Align   Notes
+#   arm          2/4    ARM and ARM-Thumb2
+#   arm64         4
+#   csky          2
+#   loongarch     4
+#   mips         2/4    MicroMIPS is 2-byte aligned
+#   parisc        4
+#   powerpc       4     Uses its own wrapper for compressors instead of this.
+#   riscv        2/4
+#   s390          2
+#   sh            2
+#   sparc         4
+#   x86           1
+
+# A few archs use 2-byte or 4-byte aligned instructions depending on
+# the kernel config. This function is used to check if the relevant
+# config option is set to "y".
+is_enabled()
+{
+	grep -q "^$1=y$" include/config/auto.conf
+}
+
+# XZ_VERSION is needed to disable features that aren't available in
+# old XZ Utils versions.
+XZ_VERSION=$($XZ --robot --version) || exit
+XZ_VERSION=$(printf '%s\n' "$XZ_VERSION" | sed -n 's/^XZ_VERSION=//p')
+
+# Assume that no BCJ filter is available.
+BCJ=
+
+# Set the instruction alignment to 1, 2, or 4 bytes.
+#
+# Set the BCJ filter if one is available.
+# It must match the #ifdef usage in lib/decompress_unxz.c.
+case $SRCARCH in
+	arm)
+		if is_enabled CONFIG_THUMB2_KERNEL; then
+			ALIGN=2
+			BCJ=--armthumb
+		else
+			ALIGN=4
+			BCJ=--arm
+		fi
+		;;
+
+	arm64)
+		ALIGN=4
+
+		# ARM64 filter was added in XZ Utils 5.4.0.
+		if [ "$XZ_VERSION" -ge 50040002 ]; then
+			BCJ=--arm64
+		else
+			echo "$0: Upgrading to xz >= 5.4.0" \
+				"would enable the ARM64 filter" \
+				"for better compression" >&2
+		fi
+		;;
+
+	csky)
+		ALIGN=2
+		;;
+
+	loongarch)
+		ALIGN=4
+		;;
+
+	mips)
+		if is_enabled CONFIG_CPU_MICROMIPS; then
+			ALIGN=2
+		else
+			ALIGN=4
+		fi
+		;;
+
+	parisc)
+		ALIGN=4
+		;;
+
+	powerpc)
+		ALIGN=4
+
+		# The filter is only for big endian instruction encoding.
+		if is_enabled CONFIG_CPU_BIG_ENDIAN; then
+			BCJ=--powerpc
+		fi
+		;;
+
+	riscv)
+		if is_enabled CONFIG_RISCV_ISA_C; then
+			ALIGN=2
+		else
+			ALIGN=4
+		fi
+
+		# RISC-V filter was added in XZ Utils 5.6.0.
+		if [ "$XZ_VERSION" -ge 50060002 ]; then
+			BCJ=--riscv
+		else
+			echo "$0: Upgrading to xz >= 5.6.0" \
+				"would enable the RISC-V filter" \
+				"for better compression" >&2
+		fi
+		;;
+
+	s390)
+		ALIGN=2
+		;;
+
+	sh)
+		ALIGN=2
+		;;
+
+	sparc)
+		ALIGN=4
+		BCJ=--sparc
+		;;
+
+	x86)
+		ALIGN=1
+		BCJ=--x86
+		;;
+
+	*)
+		echo "$0: Arch-specific tuning is missing for '$SRCARCH'" >&2
+
+		# Guess 2-byte-aligned instructions. Guessing too low
+		# should hurt less than guessing too high.
+		ALIGN=2
+		;;
+esac
+
+# Select the LZMA2 options matching the instruction alignment.
+case $ALIGN in
+	1)  LZMA2OPTS= ;;
+	2)  LZMA2OPTS=lp=1 ;;
+	4)  LZMA2OPTS=lp=2,lc=2 ;;
+	*)  echo "$0: ALIGN wrong or missing" >&2; exit 1 ;;
+esac
+
+# Use single-threaded mode because it compresses a little better
+# (and uses less RAM) than multithreaded mode.
+#
+# For the best compression, the dictionary size shouldn't be
+# smaller than the uncompressed kernel. 128 MiB dictionary
+# needs less than 1400 MiB of RAM in single-threaded mode.
+#
+# On the archs that use this script to compress the kernel,
+# decompression in the preboot code is done in single-call mode.
+# Thus the dictionary size doesn't affect the memory requirements
+# of the preboot decompressor at all.
+exec $XZ --check=crc32 --threads=1 $BCJ --lzma2=$LZMA2OPTS,dict=128MiB