Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 97 insertions, 0 deletions

diff --git a/scripts/package/mkspec b/scripts/package/mkspec
new file mode 100755
index 000000000..c604f8c17
--- /dev/null
+++ b/scripts/package/mkspec
@@ -0,0 +1,97 @@
+#!/bin/sh
+#
+#	Output a simple RPM spec file.
+#	This version assumes a minimum of RPM 4.13
+#
+#	The only gothic bit here is redefining install_post to avoid
+#	stripping the symbols from files in the kernel which we want
+#
+#	Patched for non-x86 by Opencon (L) 2002 <opencon@rio.skydome.net>
+#
+
+set -eu
+
+output=$1
+
+mkdir -p "$(dirname "${output}")"
+
+exec >"${output}"
+
+if grep -q CONFIG_MODULES=y include/config/auto.conf; then
+echo '%define with_devel %{?_without_devel: 0} %{?!_without_devel: 1}'
+else
+echo '%define with_devel 0'
+fi
+
+# use %{debug_package} machinery to generate -debuginfo
+with_debuginfo_rpm=0
+# manually generate -debuginfo package
+with_debuginfo_manual=0
+# debuginfo package generation uses find-debuginfo.sh under the hood,
+# which only works on uncompressed modules that contain debuginfo
+if grep -q CONFIG_DEBUG_INFO=y include/config/auto.conf &&
+   (! grep -q CONFIG_MODULE_COMPRESS=y include/config/auto.conf) &&
+   (! grep -q CONFIG_DEBUG_INFO_SPLIT=y include/config/auto.conf); then
+	# If module signing is enabled (which may be required to boot with
+	# lockdown enabled), the find-debuginfo.sh machinery cannot be used
+	# because the signatures will be stripped off the modules. However, due
+	# to an rpm bug in versions prior to 4.20.0
+	#
+	#     https://github.com/rpm-software-management/rpm/issues/3057
+	#     https://github.com/rpm-software-management/rpm/commit/49f906998f3cf1f4152162ca61ac0869251c380f
+	#
+	# We cannot provide our own debuginfo package because it does not listen
+	# to our custom files list, failing the build due to unpackaged files.
+	# Manually generate the debug info package if using rpm 4.20.0. If not
+	# using rpm 4.20.0, avoid generating a -debuginfo package altogether,
+	# as it is not safe.
+	if grep -q CONFIG_MODULE_SIG=y include/config/auto.conf; then
+		rpm_ver_str=$(rpm --version 2>/dev/null)
+		# Split the version on spaces
+		IFS=' '
+		set -- $rpm_ver_str
+		if [ "${1:-}" = RPM -a "${2:-}" = version ]; then
+			IFS=.
+			set -- $3
+			rpm_ver=$(( 1000000 * $1 + 10000 * $2 + 100 * $3 + ${4:-0} ))
+			if [ "$rpm_ver" -ge 4200000 ]; then
+				with_debuginfo_manual='%{?_without_debuginfo:0}%{?!_without_debuginfo:1}'
+			fi
+		fi
+	else
+		with_debuginfo_rpm='%{?_without_debuginfo:0}%{?!_without_debuginfo:1}'
+	fi
+fi
+echo "%define with_debuginfo_manual $with_debuginfo_manual"
+echo "%define with_debuginfo_rpm $with_debuginfo_rpm"
+
+cat<<EOF
+%define ARCH ${ARCH}
+%define KERNELRELEASE ${KERNELRELEASE}
+%define pkg_release $("${srctree}/scripts/build-version")
+EOF
+
+cat "${srctree}/scripts/package/kernel.spec"
+
+# collect the user's name and email address for the changelog entry
+if [ "$(command -v git)" ]; then
+	name=$(git config user.name) || true
+	email=$(git config user.email) || true
+fi
+
+if [ ! "${name:+set}" ]; then
+	name=${KBUILD_BUILD_USER:-$(id -nu)}
+fi
+
+if [ ! "${email:+set}" ]; then
+	buildhost=${KBUILD_BUILD_HOST:-$(hostname -f 2>/dev/null || hostname)}
+	builduser=${KBUILD_BUILD_USER:-$(id -nu)}
+	email="${builduser}@${buildhost}"
+fi
+
+cat << EOF
+
+%changelog
+* $(LC_ALL=C date +'%a %b %d %Y') ${name} <${email}>
+- Custom built Linux kernel.
+EOF