Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 110 insertions, 0 deletions

diff --git a/scripts/package/buildtar b/scripts/package/buildtar
new file mode 100755
index 000000000..cc87a473c
--- /dev/null
+++ b/scripts/package/buildtar
@@ -0,0 +1,110 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# buildtar 0.0.5
+#
+# (C) 2004-2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
+#
+# This script is used to compile a tarball from the currently
+# prepared kernel. Based upon the builddeb script from
+# Wichert Akkerman <wichert@wiggy.net>.
+#
+
+set -eu
+
+#
+# Some variables and settings used throughout the script
+#
+tmpdir=$1
+
+#
+# Clean-up and re-create the temporary directory
+#
+rm -rf -- "${tmpdir}"
+mkdir -p -- "${tmpdir}/boot"
+
+
+#
+# Try to install dtbs
+#
+if grep -q '^CONFIG_OF_EARLY_FLATTREE=y' include/config/auto.conf; then
+	# Only some architectures with OF support have this target
+	if [ -d "${srctree}/arch/${SRCARCH}/boot/dts" ]; then
+		$MAKE ARCH="${ARCH}" -f ${srctree}/Makefile INSTALL_DTBS_PATH="${tmpdir}/boot/dtbs/${KERNELRELEASE}" dtbs_install
+    fi
+fi
+
+
+#
+# Install modules
+#
+make ARCH="${ARCH}" -f ${srctree}/Makefile INSTALL_MOD_PATH="${tmpdir}" modules_install
+
+
+#
+# Install basic kernel files
+#
+cp -v -- "${objtree}/System.map" "${tmpdir}/boot/System.map-${KERNELRELEASE}"
+cp -v -- "${KCONFIG_CONFIG}" "${tmpdir}/boot/config-${KERNELRELEASE}"
+cp -v -- "${objtree}/vmlinux" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+
+
+#
+# Install arch-specific kernel image(s)
+#
+# Note:
+#   mips and arm64 copy the first image found. This may not produce the desired
+#   outcome because it may pick up a stale file remaining in the build tree.
+#
+case "${ARCH}" in
+	alpha)
+		cp -v -- "${objtree}/arch/alpha/boot/vmlinux.gz" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		;;
+	parisc*)
+		cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		[ -f "${objtree}/lifimage" ] && cp -v -- "${objtree}/lifimage" "${tmpdir}/boot/lifimage-${KERNELRELEASE}"
+		;;
+	mips)
+		# Please note the following code may copy a stale file.
+		if [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.bin" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.bin" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.ecoff" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.ecoff" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/compressed/vmlinux.srec" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/compressed/vmlinux.srec" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux.32" ]; then
+			cp -v -- "${objtree}/vmlinux.32" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux.64" ]; then
+			cp -v -- "${objtree}/vmlinux.64" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.bin" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.bin" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.ecoff" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.ecoff" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/arch/mips/boot/vmlinux.srec" ]; then
+			cp -v -- "${objtree}/arch/mips/boot/vmlinux.srec" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		elif [ -f "${objtree}/vmlinux" ]; then
+			cp -v -- "${objtree}/vmlinux" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}"
+		fi
+		;;
+	arm64)
+		# Please note the following code may copy a stale file.
+		for i in Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo vmlinuz.efi ; do
+			if [ -f "${objtree}/arch/arm64/boot/${i}" ] ; then
+				cp -v -- "${objtree}/arch/arm64/boot/${i}" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+				break
+			fi
+		done
+		;;
+	riscv)
+		case "${KBUILD_IMAGE##*/}" in
+			Image.*|vmlinuz.efi)
+				cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}";;
+			*)
+				cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}";;
+		esac
+		;;
+	*)
+		cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}"
+		;;
+esac