iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 162 insertions, 0 deletions

diff --git a/scripts/objdiff b/scripts/objdiff
new file mode 100755
index 000000000..0685bc3ce
--- /dev/null
+++ b/scripts/objdiff
@@ -0,0 +1,162 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+# objdiff - a small script for validating that a commit or series of commits
+# didn't change object code.
+#
+# Copyright 2014, Jason Cooper <jason@lakedaemon.net>
+#
+
+# usage example:
+#
+# $ git checkout COMMIT_A
+# $ <your fancy build command here>
+# $ ./scripts/objdiff record path/to/*.o
+#
+# $ git checkout COMMIT_B
+# $ <your fancy build command here>
+# $ ./scripts/objdiff record path/to/*.o
+#
+# $ ./scripts/objdiff diff COMMIT_A COMMIT_B
+# $
+
+# And to clean up (everything is in .objdiff/*)
+# $ ./scripts/objdiff clean all
+#
+# Note: 'make mrproper' will also remove .objdiff
+
+SRCTREE=$(cd $(git rev-parse --show-toplevel 2>/dev/null); pwd)
+
+if [ -z "$SRCTREE" ]; then
+	echo >&2 "ERROR: Not a git repository."
+	exit 1
+fi
+
+TMPD=$SRCTREE/.objdiff
+
+usage() {
+	echo >&2 "Usage: $0 <command> <args>"
+	echo >&2 "  record    <list of object files or directories>"
+	echo >&2 "  diff      <commitA> <commitB>"
+	echo >&2 "  clean     all | <commit>"
+	exit 1
+}
+
+get_output_dir() {
+	dir=${1%/*}
+
+	if [ "$dir" = "$1" ]; then
+		dir=.
+	fi
+
+	dir=$(cd $dir; pwd)
+
+	echo $TMPD/$CMT${dir#$SRCTREE}
+}
+
+do_objdump() {
+	dir=$(get_output_dir $1)
+	base=${1##*/}
+	stripped=$dir/${base%.o}.stripped
+	dis=$dir/${base%.o}.dis
+
+	[ ! -d "$dir" ] && mkdir -p $dir
+
+	# remove addresses for a cleaner diff
+	# http://dummdida.tumblr.com/post/60924060451/binary-diff-between-libc-from-scientificlinux-and
+	$STRIP -g $1 -R __bug_table -R .note -R .comment -o $stripped
+	$OBJDUMP -D $stripped | sed -e "s/^[[:space:]]\+[0-9a-f]\+//" -e "s:^$stripped:$1:" > $dis
+}
+
+dorecord() {
+	[ $# -eq 0 ] && usage
+
+	FILES="$*"
+
+	CMT="`git rev-parse --short HEAD`"
+
+	STRIP="${CROSS_COMPILE}strip"
+	OBJDUMP="${CROSS_COMPILE}objdump"
+
+	for d in $FILES; do
+		if [ -d "$d" ]; then
+			for f in $(find $d -name '*.o')
+			do
+				do_objdump $f
+			done
+		else
+			do_objdump $d
+		fi
+	done
+}
+
+dodiff() {
+	[ $# -ne 2 ] && [ $# -ne 0 ] && usage
+
+	if [ $# -eq 0 ]; then
+		SRC="`git rev-parse --short HEAD^`"
+		DST="`git rev-parse --short HEAD`"
+	else
+		SRC="`git rev-parse --short $1`"
+		DST="`git rev-parse --short $2`"
+	fi
+
+	DIFF="`which colordiff`"
+
+	if [ ${#DIFF} -eq 0 ] || [ ! -x "$DIFF" ]; then
+		DIFF="`which diff`"
+	fi
+
+	SRCD="$TMPD/$SRC"
+	DSTD="$TMPD/$DST"
+
+	if [ ! -d "$SRCD" ]; then
+		echo >&2 "ERROR: $SRCD doesn't exist"
+		exit 1
+	fi
+
+	if [ ! -d "$DSTD" ]; then
+		echo >&2 "ERROR: $DSTD doesn't exist"
+		exit 1
+	fi
+
+	$DIFF -Nurd $SRCD $DSTD
+}
+
+doclean() {
+	[ $# -eq 0 ] && usage
+	[ $# -gt 1 ] && usage
+
+	if [ "x$1" = "xall" ]; then
+		rm -rf $TMPD/*
+	else
+		CMT="`git rev-parse --short $1`"
+
+		if [ -d "$TMPD/$CMT" ]; then
+			rm -rf $TMPD/$CMT
+		else
+			echo >&2 "$CMT not found"
+		fi
+	fi
+}
+
+[ $# -eq 0 ] &&	usage
+
+case "$1" in
+	record)
+		shift
+		dorecord $*
+		;;
+	diff)
+		shift
+		dodiff $*
+		;;
+	clean)
+		shift
+		doclean $*
+		;;
+	*)
+		echo >&2 "Unrecognized command '$1'"
+		exit 1
+		;;
+esac