drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 366 insertions, 0 deletions

diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
new file mode 100755
index 000000000..e476caf52
--- /dev/null
+++ b/scripts/markup_oops.pl
@@ -0,0 +1,366 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0-only
+
+use File::Basename;
+use Math::BigInt;
+use Getopt::Long;
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# Authors:
+# 	Arjan van de Ven <arjan@linux.intel.com>
+
+
+my $cross_compile = "";
+my $vmlinux_name = "";
+my $modulefile = "";
+
+# Get options
+Getopt::Long::GetOptions(
+	'cross-compile|c=s'	=> \$cross_compile,
+	'module|m=s'		=> \$modulefile,
+	'help|h'		=> \&usage,
+) || usage ();
+my $vmlinux_name = $ARGV[0];
+if (!defined($vmlinux_name)) {
+	my $kerver = `uname -r`;
+	chomp($kerver);
+	$vmlinux_name = "/lib/modules/$kerver/build/vmlinux";
+	print "No vmlinux specified, assuming $vmlinux_name\n";
+}
+my $filename = $vmlinux_name;
+
+# Parse the oops to find the EIP value
+
+my $target = "0";
+my $function;
+my $module = "";
+my $func_offset = 0;
+my $vmaoffset = 0;
+
+my %regs;
+
+
+sub parse_x86_regs
+{
+	my ($line) = @_;
+	if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) {
+		$regs{"%eax"} = $1;
+		$regs{"%ebx"} = $2;
+		$regs{"%ecx"} = $3;
+		$regs{"%edx"} = $4;
+	}
+	if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) {
+		$regs{"%esi"} = $1;
+		$regs{"%edi"} = $2;
+		$regs{"%esp"} = $4;
+	}
+	if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) {
+		$regs{"%eax"} = $1;
+		$regs{"%ebx"} = $2;
+		$regs{"%ecx"} = $3;
+	}
+	if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) {
+		$regs{"%edx"} = $1;
+		$regs{"%esi"} = $2;
+		$regs{"%edi"} = $3;
+	}
+	if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) {
+		$regs{"%r08"} = $2;
+		$regs{"%r09"} = $3;
+	}
+	if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) {
+		$regs{"%r10"} = $1;
+		$regs{"%r11"} = $2;
+		$regs{"%r12"} = $3;
+	}
+	if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) {
+		$regs{"%r13"} = $1;
+		$regs{"%r14"} = $2;
+		$regs{"%r15"} = $3;
+	}
+}
+
+sub reg_name
+{
+	my ($reg) = @_;
+	$reg =~ s/r(.)x/e\1x/;
+	$reg =~ s/r(.)i/e\1i/;
+	$reg =~ s/r(.)p/e\1p/;
+	return $reg;
+}
+
+sub process_x86_regs
+{
+	my ($line, $cntr) = @_;
+	my $str = "";
+	if (length($line) < 40) {
+		return ""; # not an asm istruction
+	}
+
+	# find the arguments to the instruction
+	if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) {
+		$lastword = $1;
+	} else {
+		return "";
+	}
+
+	# we need to find the registers that get clobbered,
+	# since their value is no longer relevant for previous
+	# instructions in the stream.
+
+	$clobber = $lastword;
+	# first, remove all memory operands, they're read only
+	$clobber =~ s/\([a-z0-9\%\,]+\)//g;
+	# then, remove everything before the comma, thats the read part
+	$clobber =~ s/.*\,//g;
+
+	# if this is the instruction that faulted, we haven't actually done
+	# the write yet... nothing is clobbered.
+	if ($cntr == 0) {
+		$clobber = "";
+	}
+
+	foreach $reg (keys(%regs)) {
+		my $clobberprime = reg_name($clobber);
+		my $lastwordprime = reg_name($lastword);
+		my $val = $regs{$reg};
+		if ($val =~ /^[0]+$/) {
+			$val = "0";
+		} else {
+			$val =~ s/^0*//;
+		}
+
+		# first check if we're clobbering this register; if we do
+		# we print it with a =>, and then delete its value
+		if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) {
+			if (length($val) > 0) {
+				$str = $str . " $reg => $val ";
+			}
+			$regs{$reg} = "";
+			$val = "";
+		}
+		# now check if we're reading this register
+		if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) {
+			if (length($val) > 0) {
+				$str = $str . " $reg = $val ";
+			}
+		}
+	}
+	return $str;
+}
+
+# parse the oops
+while (<STDIN>) {
+	my $line = $_;
+	if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
+		$target = $1;
+	}
+	if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
+		$target = $1;
+	}
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
+		$function = $1;
+		$func_offset = $2;
+	}
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
+		$function = $1;
+		$func_offset = $2;
+	}
+
+	# check if it's a module
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+		$module = $3;
+	}
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+		$module = $3;
+	}
+	parse_x86_regs($line);
+}
+
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
+if ($target eq "0") {
+	print "No oops found!\n";
+	usage();
+}
+
+# if it's a module, we need to find the .ko file and calculate a load offset
+if ($module ne "") {
+	if ($modulefile eq "") {
+		$modulefile = `modinfo -F filename $module`;
+		chomp($modulefile);
+	}
+	$filename = $modulefile;
+	if ($filename eq "") {
+		print "Module .ko file for $module not found. Aborting\n";
+		exit;
+	}
+	# ok so we found the module, now we need to calculate the vma offset
+	open(FILE, $cross_compile."objdump -dS $filename |") || die "Cannot start objdump";
+	while (<FILE>) {
+		if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) {
+			my $fu = $1;
+			$vmaoffset = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$fu") - Math::BigInt->from_hex("0x$func_offset");
+		}
+	}
+	close(FILE);
+}
+
+my $counter = 0;
+my $state   = 0;
+my $center  = -1;
+my @lines;
+my @reglines;
+
+sub InRange {
+	my ($address, $target) = @_;
+	my $ad = "0x".$address;
+	my $ta = "0x".$target;
+	my $delta = Math::BigInt->from_hex($ad) - Math::BigInt->from_hex($ta);
+
+	if (($delta > -4096) && ($delta < 4096)) {
+		return 1;
+	}
+	return 0;
+}
+
+
+
+# first, parse the input into the lines array, but to keep size down,
+# we only do this for 4Kb around the sweet spot
+
+open(FILE, $cross_compile."objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
+
+while (<FILE>) {
+	my $line = $_;
+	chomp($line);
+	if ($state == 0) {
+		if ($line =~ /^([a-f0-9]+)\:/) {
+			if (InRange($1, $target)) {
+				$state = 1;
+			}
+		}
+	}
+	if ($state == 1) {
+		if ($line =~ /^([a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]+)\:/) {
+			my $val = $1;
+			if (!InRange($val, $target)) {
+				last;
+			}
+			if ($val eq $target) {
+				$center = $counter;
+			}
+		}
+		$lines[$counter] = $line;
+
+		$counter = $counter + 1;
+	}
+}
+
+close(FILE);
+
+if ($counter == 0) {
+	print "No matching code found \n";
+	exit;
+}
+
+if ($center == -1) {
+	print "No matching code found \n";
+	exit;
+}
+
+my $start;
+my $finish;
+my $codelines = 0;
+my $binarylines = 0;
+# now we go up and down in the array to find how much we want to print
+
+$start = $center;
+
+while ($start > 1) {
+	$start = $start - 1;
+	my $line = $lines[$start];
+	if ($line =~ /^([a-f0-9]+)\:/) {
+		$binarylines = $binarylines + 1;
+	} else {
+		$codelines = $codelines + 1;
+	}
+	if ($codelines > 10) {
+		last;
+	}
+	if ($binarylines > 20) {
+		last;
+	}
+}
+
+
+$finish = $center;
+$codelines = 0;
+$binarylines = 0;
+while ($finish < $counter) {
+	$finish = $finish + 1;
+	my $line = $lines[$finish];
+	if ($line =~ /^([a-f0-9]+)\:/) {
+		$binarylines = $binarylines + 1;
+	} else {
+		$codelines = $codelines + 1;
+	}
+	if ($codelines > 10) {
+		last;
+	}
+	if ($binarylines > 20) {
+		last;
+	}
+}
+
+
+my $i;
+
+
+# start annotating the registers in the asm.
+# this goes from the oopsing point back, so that the annotator
+# can track (opportunistically) which registers got written and
+# whos value no longer is relevant.
+
+$i = $center;
+while ($i >= $start) {
+	$reglines[$i] = process_x86_regs($lines[$i], $center - $i);
+	$i = $i - 1;
+}
+
+$i = $start;
+while ($i < $finish) {
+	my $line;
+	if ($i == $center) {
+		$line =  "*$lines[$i] ";
+	} else {
+		$line =  " $lines[$i] ";
+	}
+	print $line;
+	if (defined($reglines[$i]) && length($reglines[$i]) > 0) {
+		my $c = 60 - length($line);
+		while ($c > 0) { print " "; $c = $c - 1; };
+		print "| $reglines[$i]";
+	}
+	if ($i == $center) {
+		print "<--- faulting instruction";
+	}
+	print "\n";
+	$i = $i +1;
+}
+
+sub usage {
+	print <<EOT;
+Usage:
+  dmesg | perl $0 [OPTION] [VMLINUX]
+
+OPTION:
+  -c, --cross-compile CROSS_COMPILE	Specify the prefix used for toolchain.
+  -m, --module MODULE_DIRNAME		Specify the module filename.
+  -h, --help				Help.
+EOT
+	exit;
+}