Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 193 insertions, 0 deletions

diff --git a/scripts/headerdep.pl b/scripts/headerdep.pl
new file mode 100755
index 000000000..ebfcbef43
--- /dev/null
+++ b/scripts/headerdep.pl
@@ -0,0 +1,193 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+#
+# Detect cycles in the header file dependency graph
+# Vegard Nossum <vegardno@ifi.uio.no>
+#
+
+use strict;
+use warnings;
+
+use Getopt::Long;
+
+my $opt_all;
+my @opt_include;
+my $opt_graph;
+
+&Getopt::Long::Configure(qw(bundling pass_through));
+&GetOptions(
+	help	=> \&help,
+	version	=> \&version,
+
+	all	=> \$opt_all,
+	"I=s"	=> \@opt_include,
+	graph	=> \$opt_graph,
+);
+
+push @opt_include, 'include';
+my %deps = ();
+my %linenos = ();
+
+my @headers = grep { strip($_) } @ARGV;
+
+parse_all(@headers);
+
+if($opt_graph) {
+	graph();
+} else {
+	detect_cycles(@headers);
+}
+
+
+sub help {
+	print "Usage: $0 [options] file...\n";
+	print "\n";
+	print "Options:\n";
+	print "  --all\n";
+	print "  --graph\n";
+	print "\n";
+	print "  -I includedir\n";
+	print "\n";
+	print "To make nice graphs, try:\n";
+	print "  $0 --graph include/linux/kernel.h | dot -Tpng -o graph.png\n";
+	exit;
+}
+
+sub version {
+	print "headerdep version 2\n";
+	exit;
+}
+
+# Get a file name that is relative to our include paths
+sub strip {
+	my $filename = shift;
+
+	for my $i (@opt_include) {
+		my $stripped = $filename;
+		$stripped =~ s/^$i\///;
+
+		return $stripped if $stripped ne $filename;
+	}
+
+	return $filename;
+}
+
+# Search for the file name in the list of include paths
+sub search {
+	my $filename = shift;
+	return $filename if -f $filename;
+
+	for my $i (@opt_include) {
+		my $path = "$i/$filename";
+		return $path if -f $path;
+	}
+	return;
+}
+
+sub parse_all {
+	# Parse all the headers.
+	my @queue = @_;
+	while(@queue) {
+		my $header = pop @queue;
+		next if exists $deps{$header};
+
+		$deps{$header} = [] unless exists $deps{$header};
+
+		my $path = search($header);
+		next unless $path;
+
+		open(my $file, '<', $path) or die($!);
+		chomp(my @lines = <$file>);
+		close($file);
+
+		for my $i (0 .. $#lines) {
+			my $line = $lines[$i];
+			if(my($dep) = ($line =~ m/^#\s*include\s*<(.*?)>/)) {
+				push @queue, $dep;
+				push @{$deps{$header}}, [$i + 1, $dep];
+			}
+		}
+	}
+}
+
+sub print_cycle {
+	# $cycle[n] includes $cycle[n + 1];
+	# $cycle[-1] will be the culprit
+	my $cycle = shift;
+
+	# Adjust the line numbers
+	for my $i (0 .. $#$cycle - 1) {
+		$cycle->[$i]->[0] = $cycle->[$i + 1]->[0];
+	}
+	$cycle->[-1]->[0] = 0;
+
+	my $first = shift @$cycle;
+	my $last = pop @$cycle;
+
+	my $msg = "In file included";
+	printf "%s from %s,\n", $msg, $last->[1] if defined $last;
+
+	for my $header (reverse @$cycle) {
+		printf "%s from %s:%d%s\n",
+			" " x length $msg,
+			$header->[1], $header->[0],
+			$header->[1] eq $last->[1] ? ' <-- here' : '';
+	}
+
+	printf "%s:%d: warning: recursive header inclusion\n",
+		$first->[1], $first->[0];
+}
+
+# Find and print the smallest cycle starting in the specified node.
+sub detect_cycles {
+	my @queue = map { [[0, $_]] } @_;
+	while(@queue) {
+		my $top = pop @queue;
+		my $name = $top->[-1]->[1];
+
+		for my $dep (@{$deps{$name}}) {
+			my $chain = [@$top, [$dep->[0], $dep->[1]]];
+
+			# If the dep already exists in the chain, we have a
+			# cycle...
+			if(grep { $_->[1] eq $dep->[1] } @$top) {
+				print_cycle($chain);
+				next if $opt_all;
+				return;
+			}
+
+			push @queue, $chain;
+		}
+	}
+}
+
+sub mangle {
+	$_ = shift;
+	s/\//__/g;
+	s/\./_/g;
+	s/-/_/g;
+	$_;
+}
+
+# Output dependency graph in GraphViz language.
+sub graph {
+	print "digraph {\n";
+
+	print "\t/* vertices */\n";
+	for my $header (keys %deps) {
+		printf "\t%s [label=\"%s\"];\n",
+			mangle($header), $header;
+	}
+
+	print "\n";
+
+	print "\t/* edges */\n";
+	for my $header (keys %deps) {
+		for my $dep (@{$deps{$header}}) {
+			printf "\t%s -> %s;\n",
+				mangle($header), mangle($dep->[1]);
+		}
+	}
+
+	print "}\n";
+}