drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 929 insertions, 0 deletions

diff --git a/scripts/get_dvb_firmware b/scripts/get_dvb_firmware
new file mode 100755
index 000000000..1a9080241
--- /dev/null
+++ b/scripts/get_dvb_firmware
@@ -0,0 +1,929 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0-or-later
+#     DVB firmware extractor
+#
+#     (c) 2004 Andrew de Quincey
+#
+
+use File::Temp qw/ tempdir /;
+use IO::Handle;
+
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
+		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
+		"dec3000s", "vp7041", "vp7049", "dibusb", "nxt2002", "nxt2004",
+		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
+		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
+		"lme2510c_s7395_old", "drxk", "drxk_terratec_h5",
+		"drxk_hauppauge_hvr930c", "tda10071", "it9135", "drxk_pctv",
+		"drxk_terratec_htc_stick", "sms1xxx_hcw", "si2165");
+
+# Check args
+syntax() if (scalar(@ARGV) != 1);
+$cid = $ARGV[0];
+
+# Do it!
+for ($i=0; $i < scalar(@components); $i++) {
+    if ($cid eq $components[$i]) {
+	$outfile = eval($cid);
+	die $@ if $@;
+	print STDERR <<EOF;
+Firmware(s) $outfile extracted successfully.
+Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
+(depending on configuration of firmware hotplug).
+EOF
+	exit(0);
+    }
+}
+
+# If we get here, it wasn't found
+print STDERR "Unknown component \"$cid\"\n";
+syntax();
+
+
+
+
+# ---------------------------------------------------------------
+# Firmware-specific extraction subroutines
+
+sub sp8870 {
+    my $sourcefile = "tt_Premium_217g.zip";
+    my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile";
+    my $hash = "53970ec17a538945a6d8cb608a7b3899";
+    my $outfile = "dvb-fe-sp8870.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $hash);
+    copy("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $outfile);
+
+    $outfile;
+}
+
+sub sp887x {
+    my $sourcefile = "Dvbt1.3.57.6.zip";
+    my $url = "http://www.avermedia.com/software/$sourcefile";
+    my $cabfile = "DVBT Net  Ver1.3.57.6/disk1/data1.cab";
+    my $hash = "237938d53a7f834c05c42b894ca68ac3";
+    my $outfile = "dvb-fe-sp887x.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    checkunshield();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    unshield("$tmpdir/$cabfile", $tmpdir);
+    verify("$tmpdir/ZEnglish/sc_main.mc", $hash);
+    copy("$tmpdir/ZEnglish/sc_main.mc", $outfile);
+
+    $outfile;
+}
+
+sub tda10045 {
+    my $sourcefile = "tt_budget_217g.zip";
+    my $url = "http://www.technotrend.de/new/217g/$sourcefile";
+    my $hash = "2105fd5bf37842fbcdfa4bfd58f3594a";
+    my $outfile = "dvb-fe-tda10045.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x37ef9, 30555, "$tmpdir/fwtmp");
+    verify("$tmpdir/fwtmp", $hash);
+    copy("$tmpdir/fwtmp", $outfile);
+
+    $outfile;
+}
+
+sub tda10046 {
+	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
+	my $url = "http://technotrend.com.ua/download/software/219/$sourcefile";
+	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
+	my $outfile = "dvb-fe-tda10046.fw";
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+	checkstandard();
+
+	wgetfile($sourcefile, $url);
+	unzip($sourcefile, $tmpdir);
+	extract("$tmpdir/TT_PCI_2.19h_28_11_2006/software/OEM/PCI/App/ttlcdacc.dll", 0x65389, 24478, "$tmpdir/fwtmp");
+	verify("$tmpdir/fwtmp", $hash);
+	copy("$tmpdir/fwtmp", $outfile);
+
+	$outfile;
+}
+
+sub tda10046lifeview {
+    my $sourcefile = "7%5Cdrv_2.11.02.zip";
+    my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
+    my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
+    my $outfile = "dvb-fe-tda10046.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
+    verify("$tmpdir/fwtmp", $hash);
+    copy("$tmpdir/fwtmp", $outfile);
+
+    $outfile;
+}
+
+sub av7110 {
+    my $sourcefile = "dvb-ttpci-01.fw-261d";
+    my $url = "https://linuxtv.org/downloads/firmware/$sourcefile";
+    my $hash = "603431b6259715a8e88f376a53b64e2f";
+    my $outfile = "dvb-ttpci-01.fw";
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    verify($sourcefile, $hash);
+    copy($sourcefile, $outfile);
+
+    $outfile;
+}
+
+sub dec2000t {
+    my $sourcefile = "dec217g.exe";
+    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
+    my $hash = "bd86f458cee4a8f0a8ce2d20c66215a9";
+    my $outfile = "dvb-ttusb-dec-2000t.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $hash);
+    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $outfile);
+
+    $outfile;
+}
+
+sub dec2540t {
+    my $sourcefile = "dec217g.exe";
+    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
+    my $hash = "53e58f4f5b5c2930beee74a7681fed92";
+    my $outfile = "dvb-ttusb-dec-2540t.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $hash);
+    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $outfile);
+
+    $outfile;
+}
+
+sub dec3000s {
+    my $sourcefile = "dec217g.exe";
+    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
+    my $hash = "b013ececea83f4d6d8d2a29ac7c1b448";
+    my $outfile = "dvb-ttusb-dec-3000s.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $hash);
+    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $outfile);
+
+    $outfile;
+}
+sub opera1{
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+
+	checkstandard();
+	my $fwfile1="dvb-usb-opera1-fpga-01.fw";
+	my $fwfile2="dvb-usb-opera-01.fw";
+	extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw");
+	extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1");
+	extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2");
+	delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1");
+	delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1");
+	verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70");
+	verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1");
+	verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d");
+
+	my $RES1="\x01\x92\x7f\x00\x01\x00";
+	my $RES0="\x01\x92\x7f\x00\x00\x00";
+	my $DAT1="\x01\x00\xe6\x00\x01\x00";
+	my $DAT0="\x01\x00\xe6\x00\x00\x00";
+	open FW,">$tmpdir/opera.fw";
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part1-1");
+	print FW "$RES0";
+	print FW "$DAT0";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part2-1");
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES0";
+	print FW "$DAT0";
+	copy ("$tmpdir/opera1-fpga.fw",$fwfile1);
+	copy ("$tmpdir/opera.fw",$fwfile2);
+
+	$fwfile1.",".$fwfile2;
+}
+
+sub vp7041 {
+    my $sourcefile = "2.422.zip";
+    my $url = "http://www.twinhan.com/files/driver/USB-Ter/$sourcefile";
+    my $hash = "e88c9372d1f66609a3e7b072c53fbcfe";
+    my $outfile = "dvb-vp7041-2.422.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 12503, 3036, "$tmpdir/fwtmp1");
+    extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 2207, 10274, "$tmpdir/fwtmp2");
+
+    my $CMD = "\000\001\000\222\177\000";
+    my $PAD = "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000";
+    my ($FW);
+    open $FW, ">$tmpdir/fwtmp3";
+    print $FW "$CMD\001$PAD";
+    print $FW "$CMD\001$PAD";
+    appendfile($FW, "$tmpdir/fwtmp1");
+    print $FW "$CMD\000$PAD";
+    print $FW "$CMD\001$PAD";
+    appendfile($FW, "$tmpdir/fwtmp2");
+    print $FW "$CMD\001$PAD";
+    print $FW "$CMD\000$PAD";
+    close($FW);
+
+    verify("$tmpdir/fwtmp3", $hash);
+    copy("$tmpdir/fwtmp3", $outfile);
+
+    $outfile;
+}
+
+sub vp7049 {
+    my $fwfile = "dvb-usb-vp7049-0.95.fw";
+    my $url = "http://ao2.it/sites/default/files/blog/2012/11/06/linux-support-digicom-digitune-s-vp7049-udtt7049/$fwfile";
+    my $hash = "5609fd295168aea88b25ff43a6f79c36";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub dibusb {
+	my $url = "https://linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
+	my $outfile = "dvb-dibusb-5.0.0.11.fw";
+	my $hash = "fa490295a527360ca16dcdf3224ca243";
+
+	checkstandard();
+
+	wgetfile($outfile, $url);
+	verify($outfile,$hash);
+
+	$outfile;
+}
+
+sub nxt2002 {
+    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
+    my $url = "http://www.bbti.us/download/windows/$sourcefile";
+    my $hash = "476befae8c7c1bb9648954060b1eec1f";
+    my $outfile = "dvb-fe-nxt2002.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/SkyNET.sys", $hash);
+    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
+
+    $outfile;
+}
+
+sub nxt2004 {
+    my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
+    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
+    my $hash = "111cb885b1e009188346d72acfed024c";
+    my $outfile = "dvb-fe-nxt2004.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/3xHybrid.sys", $hash);
+    extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile);
+
+    $outfile;
+}
+
+sub or51211 {
+    my $fwfile = "dvb-fe-or51211.fw";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
+    my $hash = "d830949c771a289505bf9eafc225d491";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub cx231xx {
+    my $fwfile = "v4l-cx231xx-avcore-01.fw";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
+    my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub cx18 {
+    my $url = "https://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
+	'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79',
+	'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
+sub cx23885 {
+    my $url = "https://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
+	'v4l-cx23885-enc.fw'       => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub pvrusb2 {
+    my $url = "https://linuxtv.org/downloads/firmware/";
+
+    my %files = (
+	'v4l-cx25840.fw'           => 'dadb79e9904fc8af96e8111d9cb59320',
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub or51132_qam {
+    my $fwfile = "dvb-fe-or51132-qam.fw";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
+    my $hash = "7702e8938612de46ccadfe9b413cb3b5";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub or51132_vsb {
+    my $fwfile = "dvb-fe-or51132-vsb.fw";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
+    my $hash = "c16208e02f36fc439a557ad4c613364a";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url);
+    verify($fwfile, $hash);
+
+    $fwfile;
+}
+
+sub bluebird {
+	my $url = "https://linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
+	my $outfile = "dvb-usb-bluebird-01.fw";
+	my $hash = "658397cb9eba9101af9031302671f49d";
+
+	checkstandard();
+
+	wgetfile($outfile, $url);
+	verify($outfile,$hash);
+
+	$outfile;
+}
+
+sub af9015 {
+	my $sourcefile = "download.ashx?file=57";
+	my $url = "http://www.ite.com.tw/EN/Services/$sourcefile";
+	my $hash = "e3f08935158038d385ad382442f4bb2d";
+	my $outfile = "dvb-usb-af9015.fw";
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+	my $fwoffset = 0x25690;
+	my $fwlength = 18725;
+	my ($chunklength, $buf, $rcount);
+
+	checkstandard();
+
+	wgetfile($sourcefile, $url);
+	unzip($sourcefile, $tmpdir);
+	verify("$tmpdir/Driver/Files/AF15BDA.sys", $hash);
+
+	open INFILE, '<', "$tmpdir/Driver/Files/AF15BDA.sys";
+	open OUTFILE, '>', $outfile;
+
+	sysseek(INFILE, $fwoffset, SEEK_SET);
+	while($fwlength > 0) {
+		$chunklength = 55;
+		$chunklength = $fwlength if ($chunklength > $fwlength);
+		$rcount = sysread(INFILE, $buf, $chunklength);
+		die "Ran out of data\n" if ($rcount != $chunklength);
+		syswrite(OUTFILE, $buf);
+		sysread(INFILE, $buf, 8);
+		$fwlength -= $rcount + 8;
+	}
+
+	close OUTFILE;
+	close INFILE;
+}
+
+sub ngene {
+    my $url = "http://www.digitaldevices.de/download/";
+    my $file1 = "ngene_15.fw";
+    my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
+    my $file2 = "ngene_17.fw";
+    my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+    my $url2 = "http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/";
+    my $file3 = "ngene_18.fw";
+    my $hash3 = "ebce3ea769a53e3e0b0197c3b3f127e3";
+
+    checkstandard();
+
+    wgetfile($file1, $url . $file1);
+    verify($file1, $hash1);
+
+    wgetfile($file2, $url . $file2);
+    verify($file2, $hash2);
+
+    wgetfile($file3, $url2 . $file3);
+    verify($file3, $hash3);
+
+    "$file1, $file2, $file3";
+}
+
+sub az6027{
+    my $firmware = "dvb-usb-az6027-03.fw";
+    my $url = "http://linux.terratec.de/files/TERRATEC_S7/$firmware";
+
+    wgetfile($firmware, $url);
+
+    $firmware;
+}
+
+sub lme2510_lg {
+    my $sourcefile = "LMEBDA_DVBS.sys";
+    my $hash = "fc6017ad01e79890a97ec53bea157ed2";
+    my $outfile = "dvb-usb-lme2510-lg.fw";
+    my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 4168, 3841, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
+sub lme2510c_s7395 {
+    my $sourcefile = "US2A0D.sys";
+    my $hash = "b0155a8083fb822a3bd47bc360e74601";
+    my $outfile = "dvb-usb-lme2510c-s7395.fw";
+    my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 37248, 3720, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
+sub lme2510c_s7395_old {
+    my $sourcefile = "LMEBDA_DVBS7395C.sys";
+    my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31";
+    my $outfile = "dvb-usb-lme2510c-s7395.fw";
+    my $hasho = "90430c5b435eb5c6f88fd44a9d950674";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 4208, 3881, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
+sub drxk {
+    my $url = "http://l4m-daten.de/files/";
+    my $zipfile = "DDTuner.zip";
+    my $hash = "f5a37b9a20a3534997997c0b1382a3e5";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+    my $drvfile = "DDTuner.sys";
+    my $fwfile = "drxk_a3.mc";
+
+    checkstandard();
+
+    wgetfile($zipfile, $url . $zipfile);
+    verify($zipfile, $hash);
+    unzip($zipfile, $tmpdir);
+    extract("$tmpdir/$drvfile", 0x14dd8, 15634, "$fwfile");
+
+    "$fwfile"
+}
+
+sub drxk_hauppauge_hvr930c {
+    my $url = "http://www.wintvcd.co.uk/drivers/";
+    my $zipfile = "HVR-9x0_5_10_325_28153_SIGNED.zip";
+    my $hash = "83ab82e7e9480ec8bf1ae0155ca63c88";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+    my $drvfile = "HVR-900/emOEM.sys";
+    my $fwfile = "dvb-usb-hauppauge-hvr930c-drxk.fw";
+
+    checkstandard();
+
+    wgetfile($zipfile, $url . $zipfile);
+    verify($zipfile, $hash);
+    unzip($zipfile, $tmpdir);
+    extract("$tmpdir/$drvfile", 0x117b0, 42692, "$fwfile");
+
+    "$fwfile"
+}
+
+sub drxk_terratec_h5 {
+    my $url = "https://linuxtv.org/downloads/firmware/";
+    my $hash = "19000dada8e2741162ccc50cc91fa7f1";
+    my $fwfile = "dvb-usb-terratec-h5-drxk.fw";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url . $fwfile);
+    verify($fwfile, $hash);
+
+    "$fwfile"
+}
+
+sub drxk_terratec_htc_stick {
+    my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/History/";
+    my $zipfile = "Cinergy_HTC_Stick_Drv_5.09.1202.00_XP_Vista_7.exe";
+    my $hash = "6722a2442a05423b781721fbc069ed5e";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+    my $drvfile = "Cinergy HTC Stick/BDA Driver 5.09.1202.00/Windows 32 Bit/emOEM.sys";
+    my $fwfile = "dvb-usb-terratec-htc-stick-drxk.fw";
+
+    checkstandard();
+
+    wgetfile($zipfile, $url . $zipfile);
+    verify($zipfile, $hash);
+    unzip($zipfile, $tmpdir);
+    extract("$tmpdir/$drvfile", 0x4e5c0, 42692, "$fwfile");
+
+    "$fwfile"
+}
+
+sub it9135 {
+	my $url = "http://www.ite.com.tw/uploads/firmware/v3.25.0.0/";
+	my $file1 = "dvb-usb-it9135-01.zip";
+	my $fwfile1 = "dvb-usb-it9135-01.fw";
+	my $hash1 = "02fcf11174eda84745dae7e61c5ff9ba";
+	my $file2 = "dvb-usb-it9135-02.zip";
+	my $fwfile2 = "dvb-usb-it9135-02.fw";
+	my $hash2 = "d5e1437dc24358578e07999475d4cac9";
+
+	checkstandard();
+
+	wgetfile($file1, $url . $file1);
+	unzip($file1, "");
+	verify("$fwfile1", $hash1);
+
+	wgetfile($file2, $url . $file2);
+	unzip($file2, "");
+	verify("$fwfile2", $hash2);
+
+	"$file1 $file2"
+}
+
+sub tda10071 {
+    my $sourcefile = "PCTV_460e_reference.zip";
+    my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/";
+    my $hash = "4403de903bf2593464c8d74bbc200a57";
+    my $fwfile = "dvb-fe-tda10071.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url . $sourcefile);
+    verify($sourcefile, $hash);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x67d38, 40504, $fwfile);
+
+    "$fwfile";
+}
+
+sub drxk_pctv {
+    my $sourcefile = "PCTV_460e_reference.zip";
+    my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/";
+    my $hash = "4403de903bf2593464c8d74bbc200a57";
+    my $fwfile = "dvb-demod-drxk-pctv.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url . $sourcefile);
+    verify($sourcefile, $hash);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x72b80, 42692, $fwfile);
+
+    "$fwfile";
+}
+
+sub sms1xxx_hcw {
+    my $url = "http://steventoth.net/linux/sms1xxx/";
+    my %files = (
+	'sms1xxx-hcw-55xxx-dvbt-01.fw'  => "afb6f9fb9a71d64392e8564ef9577e5a",
+	'sms1xxx-hcw-55xxx-dvbt-02.fw'  => "b44807098ba26e52cbedeadc052ba58f",
+	'sms1xxx-hcw-55xxx-isdbt-02.fw' => "dae934eeea85225acbd63ce6cfe1c9e4",
+    );
+
+    checkstandard();
+
+    my $allfiles;
+    foreach my $fwfile (keys %files) {
+	wgetfile($fwfile, "$url/$fwfile");
+	verify($fwfile, $files{$fwfile});
+	$allfiles .= " $fwfile";
+    }
+
+    $allfiles =~ s/^\s//;
+
+    $allfiles;
+}
+
+sub si2165 {
+    my $sourcefile = "model_111xxx_122xxx_driver_6_0_119_31191_WHQL.zip";
+    my $url = "http://www.hauppauge.de/files/drivers/";
+    my $hash = "76633e7c76b0edee47c3ba18ded99336";
+    my $fwfile = "dvb-demod-si2165.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url . $sourcefile);
+    verify($sourcefile, $hash);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/Driver10/Hcw10bda.sys", 0x80788, 0x81E08-0x80788, "$tmpdir/fw1");
+
+    delzero("$tmpdir/fw1","$tmpdir/fw1-1");
+    #verify("$tmpdir/fw1","5e0909858fdf0b5b09ad48b9fe622e70");
+
+    my $CRC="\x0A\xCC";
+    my $BLOCKS_MAIN="\x27";
+    open FW,">$fwfile";
+    print FW "\x01\x00"; # just a version id for the driver itself
+    print FW "\x9A"; # fw version
+    print FW "\x00"; # padding
+    print FW "$BLOCKS_MAIN"; # number of blocks of main part
+    print FW "\x00"; # padding
+    print FW "$CRC"; # 16bit crc value of main part
+    appendfile(FW,"$tmpdir/fw1");
+
+    "$fwfile";
+}
+
+# ---------------------------------------------------------------
+# Utilities
+
+sub checkstandard {
+    if (system("which unzip > /dev/null 2>&1")) {
+	die "This firmware requires the unzip command - see ftp://ftp.info-zip.org/pub/infozip/UnZip.html\n";
+    }
+    if (system("which md5sum > /dev/null 2>&1")) {
+	die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n";
+    }
+    if (system("which wget > /dev/null 2>&1")) {
+	die "This firmware requires the wget command - see http://wget.sunsite.dk/\n";
+    }
+}
+
+sub checkunshield {
+    if (system("which unshield > /dev/null 2>&1")) {
+	die "This firmware requires the unshield command - see http://sourceforge.net/projects/synce/\n";
+    }
+}
+
+sub wgetfile {
+    my ($sourcefile, $url) = @_;
+
+    if (! -f $sourcefile) {
+	system("wget -O \"$sourcefile\" \"$url\"") and die "wget failed - unable to download firmware";
+    }
+}
+
+sub unzip {
+    my ($sourcefile, $todir) = @_;
+
+    $status = system("unzip -q -o -d \"$todir\" \"$sourcefile\" 2>/dev/null" );
+    if ((($status >> 8) > 2) || (($status & 0xff) != 0)) {
+	die ("unzip failed - unable to extract firmware");
+    }
+}
+
+sub unshield {
+    my ($sourcefile, $todir) = @_;
+
+    system("unshield x -d \"$todir\" \"$sourcefile\" > /dev/null" ) and die ("unshield failed - unable to extract firmware");
+}
+
+sub verify {
+    my ($filename, $hash) = @_;
+    my ($testhash);
+
+    open(CMD, "md5sum \"$filename\"|");
+    $testhash = <CMD>;
+    $testhash =~ /([a-zA-Z0-9]*)/;
+    $testhash = $1;
+    close CMD;
+    die "Hash of extracted file does not match!\n" if ($testhash ne $hash);
+}
+
+sub copy {
+    my ($from, $to) = @_;
+
+    system("cp -f \"$from\" \"$to\"") and die ("cp failed");
+}
+
+sub extract {
+    my ($infile, $offset, $length, $outfile) = @_;
+    my ($chunklength, $buf, $rcount);
+
+    open INFILE, "<$infile";
+    open OUTFILE, ">$outfile";
+    sysseek(INFILE, $offset, SEEK_SET);
+    while($length > 0) {
+	# Calc chunk size
+	$chunklength = 2048;
+	$chunklength = $length if ($chunklength > $length);
+
+	$rcount = sysread(INFILE, $buf, $chunklength);
+	die "Ran out of data\n" if ($rcount != $chunklength);
+	syswrite(OUTFILE, $buf);
+	$length -= $rcount;
+    }
+    close INFILE;
+    close OUTFILE;
+}
+
+sub appendfile {
+    my ($FH, $infile) = @_;
+    my ($buf);
+
+    open INFILE, "<$infile";
+    while(1) {
+	$rcount = sysread(INFILE, $buf, 2048);
+	last if ($rcount == 0);
+	print $FH $buf;
+    }
+    close(INFILE);
+}
+
+sub delzero{
+	my ($infile,$outfile) =@_;
+
+	open INFILE,"<$infile";
+	open OUTFILE,">$outfile";
+	while (1){
+		$rcount=sysread(INFILE,$buf,22);
+		$len=ord(substr($buf,0,1));
+		print OUTFILE substr($buf,0,1);
+		print OUTFILE substr($buf,2,$len+3);
+	last if ($rcount<1);
+	printf OUTFILE "%c",0;
+#print $len." ".length($buf)."\n";
+
+	}
+	close(INFILE);
+	close(OUTFILE);
+}
+
+sub syntax() {
+    print STDERR "syntax: get_dvb_firmware <component>\n";
+    print STDERR "Supported components:\n";
+    @components = sort @components;
+    for($i=0; $i < scalar(@components); $i++) {
+	print STDERR "\t" . $components[$i] . "\n";
+    }
+    exit(1);
+}