Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 147 insertions, 0 deletions

diff --git a/scripts/gen-btf.sh b/scripts/gen-btf.sh
new file mode 100755
index 000000000..8ca96eb10
--- /dev/null
+++ b/scripts/gen-btf.sh
@@ -0,0 +1,147 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Meta Platforms, Inc. and affiliates.
+#
+# This script generates BTF data for the provided ELF file.
+#
+# Kernel BTF generation involves these conceptual steps:
+#   1. pahole generates BTF from DWARF data
+#   2. resolve_btfids applies kernel-specific btf2btf
+#      transformations and computes data for .BTF_ids section
+#   3. the result gets linked/objcopied into the target binary
+#
+# How step (3) should be done differs between vmlinux, and
+# kernel modules, which is the primary reason for the existence
+# of this script.
+#
+# For modules the script expects vmlinux passed in as --btf_base.
+# Generated .BTF, .BTF.base and .BTF_ids sections become embedded
+# into the input ELF file with objcopy.
+#
+# For vmlinux the input file remains unchanged and two files are produced:
+#   - ${1}.btf.o ready for linking into vmlinux
+#   - ${1}.BTF_ids with .BTF_ids data blob
+# This output is consumed by scripts/link-vmlinux.sh
+
+set -e
+
+usage()
+{
+	echo "Usage: $0 [--btf_base <file>] <target ELF file>"
+	exit 1
+}
+
+BTF_BASE=""
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	--btf_base)
+		BTF_BASE="$2"
+		shift 2
+		;;
+	-*)
+		echo "Unknown option: $1" >&2
+		usage
+		;;
+	*)
+		break
+		;;
+	esac
+done
+
+if [ $# -ne 1 ]; then
+	usage
+fi
+
+ELF_FILE="$1"
+shift
+
+is_enabled() {
+	grep -q "^$1=y" ${objtree}/include/config/auto.conf
+}
+
+case "${KBUILD_VERBOSE}" in
+*1*)
+	set -x
+	;;
+esac
+
+gen_btf_data()
+{
+	btf1="${ELF_FILE}.BTF.1"
+	${PAHOLE} -J ${PAHOLE_FLAGS}			\
+		${BTF_BASE:+--btf_base ${BTF_BASE}}	\
+		--btf_encode_detached=${btf1}		\
+		"${ELF_FILE}"
+
+	${RESOLVE_BTFIDS} ${RESOLVE_BTFIDS_FLAGS}	\
+		${BTF_BASE:+--btf_base ${BTF_BASE}}	\
+		--btf ${btf1} "${ELF_FILE}"
+}
+
+gen_btf_o()
+{
+	btf_data=${ELF_FILE}.btf.o
+
+	# Create ${btf_data} which contains just .BTF section but no symbols. Add
+	# SHF_ALLOC because .BTF will be part of the vmlinux image. --strip-all
+	# deletes all symbols including __start_BTF and __stop_BTF, which will
+	# be redefined in the linker script.
+	echo "" | ${CC} ${CLANG_FLAGS} ${KBUILD_CPPFLAGS} ${KBUILD_CFLAGS} -fno-lto -c -x c -o ${btf_data} -
+	${OBJCOPY} --add-section .BTF=${ELF_FILE}.BTF \
+		--set-section-flags .BTF=alloc,readonly ${btf_data}
+	${OBJCOPY} --only-section=.BTF --strip-all ${btf_data}
+
+	# Change e_type to ET_REL so that it can be used to link final vmlinux.
+	# GNU ld 2.35+ and lld do not allow an ET_EXEC input.
+	if is_enabled CONFIG_CPU_BIG_ENDIAN; then
+		et_rel='\0\1'
+	else
+		et_rel='\1\0'
+	fi
+	printf "${et_rel}" | dd of="${btf_data}" conv=notrunc bs=1 seek=16 status=none
+}
+
+embed_btf_data()
+{
+	${OBJCOPY} --add-section .BTF=${ELF_FILE}.BTF ${ELF_FILE}
+
+	# a module might not have a .BTF_ids or .BTF.base section
+	btf_base="${ELF_FILE}.BTF.base"
+	if [ -f "${btf_base}" ]; then
+		${OBJCOPY} --add-section .BTF.base=${btf_base} ${ELF_FILE}
+	fi
+	btf_ids="${ELF_FILE}.BTF_ids"
+	if [ -f "${btf_ids}" ]; then
+		${RESOLVE_BTFIDS} --patch_btfids ${btf_ids} ${ELF_FILE}
+	fi
+}
+
+cleanup()
+{
+	rm -f "${ELF_FILE}.BTF.1"
+	rm -f "${ELF_FILE}.BTF"
+	if [ "${BTFGEN_MODE}" = "module" ]; then
+		rm -f "${ELF_FILE}.BTF.base"
+		rm -f "${ELF_FILE}.BTF_ids"
+	fi
+}
+trap cleanup EXIT
+
+BTFGEN_MODE="vmlinux"
+if [ -n "${BTF_BASE}" ]; then
+	BTFGEN_MODE="module"
+fi
+
+gen_btf_data
+
+case "${BTFGEN_MODE}" in
+vmlinux)
+	gen_btf_o
+	;;
+module)
+	embed_btf_data
+	;;
+esac
+
+exit 0