Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 361 insertions, 0 deletions

diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff
new file mode 100755
index 000000000..f2bbde4bb
--- /dev/null
+++ b/scripts/dtc/dtx_diff
@@ -0,0 +1,361 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Copyright (C) 2015 Frank Rowand
+#
+
+
+usage() {
+
+	# use spaces instead of tabs in the usage message
+	cat >&2 <<eod
+
+Usage:
+
+   `basename $0` DTx
+        decompile DTx
+
+   `basename $0` DTx_1 DTx_2
+        diff DTx_1 and DTx_2
+
+
+      --annotate    synonym for -T
+      --color       synonym for -c (requires diff with --color support)
+       -c           enable colored output
+       -f           print full dts in diff (--unified=99999)
+       -h           synonym for --help
+       -help        synonym for --help
+      --help        print this message and exit
+       -s SRCTREE   linux kernel source tree is at path SRCTREE
+                        (default is current directory)
+       -S           linux kernel source tree is at root of current git repo
+       -T           annotate output .dts with input source file and line
+                        (-T -T for more details)
+       -u           unsorted, do not sort DTx
+
+
+Each DTx is processed by the dtc compiler to produce a sorted dts source
+file.  If DTx is a dts source file then it is pre-processed in the same
+manner as done for the compile of the dts source file in the Linux kernel
+build system ('#include' and '/include/' directives are processed).
+
+If two DTx are provided, the resulting dts source files are diffed.
+
+If DTx is a directory, it is treated as a DT subtree, such as
+  /proc/device-tree.
+
+If DTx contains the binary blob magic value in the first four bytes,
+  it is treated as a binary blob (aka .dtb or FDT).
+
+Otherwise DTx is treated as a dts source file (aka .dts).
+
+   If this script is not run from the root of the linux source tree,
+   and DTx utilizes '#include' or '/include/' then the path of the
+   linux source tree can be provided by '-s SRCTREE' or '-S' so that
+   include paths will be set properly.
+
+   The shell variable \${ARCH} must provide the architecture containing
+   the dts source file for include paths to be set properly for '#include'
+   or '/include/' to be processed.
+
+   If DTx_1 and DTx_2 are in different architectures, then this script
+   may not work since \${ARCH} is part of the include path.  The following
+   workaround can be used:
+
+      `basename $0` ARCH=arch_of_dtx_1 DTx_1 >tmp_dtx_1.dts
+      `basename $0` ARCH=arch_of_dtx_2 DTx_2 >tmp_dtx_2.dts
+      `basename $0` tmp_dtx_1.dts tmp_dtx_2.dts
+      rm tmp_dtx_1.dts tmp_dtx_2.dts
+
+   If DTx_1 and DTx_2 are in different directories, then this script will
+   add the path of DTx_1 and DTx_2 to the include paths.  If DTx_2 includes
+   a local file that exists in both the path of DTx_1 and DTx_2 then the
+   file in the path of DTx_1 will incorrectly be included.  Possible
+   workaround:
+
+      `basename $0` DTx_1 >tmp_dtx_1.dts
+      `basename $0` DTx_2 >tmp_dtx_2.dts
+      `basename $0` tmp_dtx_1.dts tmp_dtx_2.dts
+      rm tmp_dtx_1.dts tmp_dtx_2.dts
+
+eod
+}
+
+
+compile_to_dts() {
+
+	dtx="$1"
+	dtc_include="$2"
+
+	if [ -d "${dtx}" ] ; then
+
+		# -----  input is file tree
+
+		if ( ! ${DTC} -I fs ${dtx} ) ; then
+			exit 3
+		fi
+
+	elif [ -f "${dtx}" ] && [ -r "${dtx}" ] ; then
+
+		magic=`hexdump -n 4 -e '/1 "%02x"' ${dtx}`
+		if [ "${magic}" = "d00dfeed" ] ; then
+
+			# -----  input is FDT (binary blob)
+
+			if ( ! ${DTC} -I dtb ${dtx} ) ; then
+				exit 3
+			fi
+
+			return
+
+		fi
+
+		# -----  input is DTS (source)
+
+		if ( cpp ${cpp_flags} -x assembler-with-cpp ${dtx} \
+			| ${DTC} ${dtc_include} -I dts ) ; then
+			return
+		fi
+
+		echo ""                                                      >&2
+		echo "Possible hints to resolve the above error:"            >&2
+		echo "  (hints might not fix the problem)"                   >&2
+
+		hint_given=0
+
+		if [ "${ARCH}" = "" ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  shell variable \$ARCH not set"               >&2
+		fi
+
+		dtx_arch=`echo "/${dtx}" | sed -e 's|.*/arch/||' -e 's|/.*||'`
+
+		if [ "${dtx_arch}" != ""  -a "${dtx_arch}" != "${ARCH}" ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  architecture ${dtx_arch} is in file path,"   >&2
+			echo "  but does not match shell variable \$ARCH"    >&2
+			echo "  >>\$ARCH<< is: >>${ARCH}<<"                  >&2
+		fi
+
+		if [ ! -d ${srctree}/arch/${ARCH} ] ; then
+			hint_given=1
+			echo ""                                              >&2
+			echo "  ${srctree}/arch/${ARCH}/ does not exist"     >&2
+			echo "  Is \$ARCH='${ARCH}' correct?"                >&2
+			echo "  Possible fix: use '-s' option"               >&2
+
+			git_root=`git rev-parse --show-toplevel 2>/dev/null`
+			if [ -d ${git_root}/arch/ ] ; then
+				echo "  Possible fix: use '-S' option"       >&2
+			fi
+		fi
+
+		if [ $hint_given = 0 ] ; then
+			echo ""                                              >&2
+			echo "  No hints available."                         >&2
+		fi
+
+		echo ""                                                      >&2
+
+		exit 3
+
+	else
+		echo ""                                                     >&2
+		echo "ERROR: ${dtx} does not exist or is not readable"      >&2
+		echo ""                                                     >&2
+		exit 2
+	fi
+
+}
+
+
+# -----  start of script
+
+annotate=""
+cmd_diff=0
+diff_flags="-u"
+diff_color=""
+dtx_file_1=""
+dtx_file_2=""
+dtc_sort="-s"
+help=0
+srctree=""
+
+
+while [ $# -gt 0 ] ; do
+
+	case $1 in
+
+	-c | --color )
+		if diff --color /dev/null /dev/null 2>/dev/null ; then
+			diff_color="--color=always"
+		fi
+		shift
+		;;
+
+	-f )
+		diff_flags="--unified=999999"
+		shift
+		;;
+
+	-h | -help | --help )
+		help=1
+		shift
+		;;
+
+	-s )
+		srctree="$2"
+		shift 2
+		;;
+
+	-S )
+		git_root=`git rev-parse --show-toplevel 2>/dev/null`
+		srctree="${git_root}"
+		shift
+		;;
+
+	-T | --annotate )
+		if [ "${annotate}"  = "" ] ; then
+			annotate="-T"
+		elif [ "${annotate}"  = "-T" ] ; then
+			annotate="-T -T"
+		fi
+		shift
+		;;
+	-u )
+		dtc_sort=""
+		shift
+		;;
+
+	*)
+		if [ "${dtx_file_1}"  = "" ] ; then
+			dtx_file_1="$1"
+		elif [ "${dtx_file_2}" = "" ] ; then
+			dtx_file_2="$1"
+		else
+			echo ""                                             >&2
+			echo "ERROR: Unexpected parameter: $1"              >&2
+			echo ""                                             >&2
+			exit 2
+		fi
+		shift
+		;;
+
+	esac
+
+done
+
+if [ "${srctree}" = "" ] ; then
+	srctree="."
+fi
+
+if [ "${dtx_file_2}" != "" ]; then
+	cmd_diff=1
+fi
+
+if (( ${help} )) ; then
+	usage
+	exit 1
+fi
+
+# this must follow check for ${help}
+if [ "${dtx_file_1}" = "" ]; then
+	echo ""                                                             >&2
+	echo "ERROR: parameter DTx required"                                >&2
+	echo ""                                                             >&2
+	exit 2
+fi
+
+
+# -----  prefer dtc from linux kernel, allow fallback to dtc in $PATH
+
+if [ "${KBUILD_OUTPUT:0:2}" = ".." ] ; then
+	__KBUILD_OUTPUT="${srctree}/${KBUILD_OUTPUT}"
+elif [ "${KBUILD_OUTPUT}" = "" ] ; then
+	__KBUILD_OUTPUT="."
+else
+	__KBUILD_OUTPUT="${KBUILD_OUTPUT}"
+fi
+
+DTC="${__KBUILD_OUTPUT}/scripts/dtc/dtc"
+
+if [ ! -x ${DTC} ] ; then
+	__DTC="dtc"
+	if grep -q "^CONFIG_DTC=y" ${__KBUILD_OUTPUT}/.config 2>/dev/null; then
+		make_command='
+         make scripts'
+	else
+		make_command='
+         Enable CONFIG_DTC in the kernel configuration
+         make scripts'
+	fi
+	if ( ! which ${__DTC} >/dev/null ) ; then
+
+		# use spaces instead of tabs in the error message
+		cat >&2 <<eod
+
+ERROR: unable to find a 'dtc' program
+
+   Preferred 'dtc' (built from Linux kernel source tree) was not found or
+   is not executable.
+
+      'dtc' is: ${DTC}
+
+      If it does not exist, create it from the root of the Linux source tree:
+${make_command}
+
+      If not at the root of the Linux kernel source tree -s SRCTREE or -S
+      may need to be specified to find 'dtc'.
+
+      If 'O=\${dir}' is specified in your Linux builds, this script requires
+      'export KBUILD_OUTPUT=\${dir}' or add \${dir}/scripts/dtc to \$PATH
+      before running.
+
+      If \${KBUILD_OUTPUT} is a relative path, then '-s SRCDIR', -S, or run
+      this script from the root of the Linux kernel source tree is required.
+
+   Fallback '${__DTC}' was also not in \${PATH} or is not executable.
+
+eod
+		exit 2
+	fi
+	DTC=${__DTC}
+fi
+
+
+# -----  cpp and dtc flags same as for linux source tree build of .dtb files,
+#        plus directories of the dtx file(s)
+
+dtx_path_1_dtc_include="-i `dirname ${dtx_file_1}`"
+
+dtx_path_2_dtc_include=""
+if (( ${cmd_diff} )) ; then
+	dtx_path_2_dtc_include="-i `dirname ${dtx_file_2}`"
+fi
+
+cpp_flags="\
+	-nostdinc                                  \
+	-I${srctree}/scripts/dtc/include-prefixes  \
+	-undef -D__DTS__"
+
+DTC="\
+	${DTC}                                     \
+	-i ${srctree}/scripts/dtc/include-prefixes \
+	-O dts -qq -f ${dtc_sort} ${annotate} -o -"
+
+
+# -----  do the diff or decompile
+
+if (( ${cmd_diff} )) ; then
+
+	diff ${diff_flags} ${diff_color} --label "${dtx_file_1}" --label "${dtx_file_2}" \
+		<(compile_to_dts "${dtx_file_1}" "${dtx_path_1_dtc_include}") \
+		<(compile_to_dts "${dtx_file_2}" "${dtx_path_2_dtc_include}")
+
+else
+
+	compile_to_dts "${dtx_file_1}" "${dtx_path_1_dtc_include}"
+
+fi