virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 251 insertions, 0 deletions

diff --git a/scripts/decodecode b/scripts/decodecode
new file mode 100755
index 000000000..01d25dc11
--- /dev/null
+++ b/scripts/decodecode
@@ -0,0 +1,251 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Disassemble the Code: line in Linux oopses
+# usage: decodecode < oops.file
+#
+# options: set env. variable AFLAGS=options to pass options to "as";
+# e.g., to decode an i386 oops on an x86_64 system, use:
+# AFLAGS=--32 decodecode < 386.oops
+# PC=hex - the PC (program counter) the oops points to
+
+faultlinenum=1
+
+cleanup() {
+	rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
+}
+
+die() {
+	echo "$@"
+	exit 1
+}
+
+trap cleanup EXIT
+
+T=`mktemp` || die "cannot create temp file"
+code=
+cont=
+
+while read i ; do
+
+case "$i" in
+*Code:*)
+	code=$i
+	cont=yes
+	;;
+*)
+	[ -n "$cont" ] && {
+		xdump="$(echo $i | grep '^[[:xdigit:]<>[:space:]]\+$')"
+		if [ -n "$xdump" ]; then
+			code="$code $xdump"
+		else
+			cont=
+		fi
+	}
+	;;
+esac
+
+done
+
+if [ -z "$code" ]; then
+	rm $T
+	die "Code line not found"
+fi
+
+echo $code
+code=`echo $code | sed -e 's/.*Code: //'`
+
+width=`expr index "$code" ' '`
+width=$((($width-1)/2))
+case $width in
+1) type=byte ;;
+2) type=2byte ;;
+4) type=4byte ;;
+esac
+
+if [ -z "$ARCH" ]; then
+    case `uname -m` in
+	aarch64*) ARCH=arm64 ;;
+	arm*) ARCH=arm ;;
+	loongarch*) ARCH=loongarch ;;
+    esac
+fi
+
+# Params: (tmp_file, pc_sub)
+disas() {
+	t=$1
+	pc_sub=$2
+
+	${CROSS_COMPILE}as $AFLAGS -o $t.o $t.s > /dev/null 2>&1
+
+	if [ "$ARCH" = "arm" ]; then
+		if [ $width -eq 2 ]; then
+			OBJDUMPFLAGS="-M force-thumb"
+		fi
+
+		${CROSS_COMPILE}strip $t.o
+	fi
+
+	if [ "$ARCH" = "arm64" ]; then
+		if [ $width -eq 4 ]; then
+			type=inst
+		fi
+
+		${CROSS_COMPILE}strip $t.o
+	fi
+
+	if [ "$ARCH" = "riscv" ]; then
+		OBJDUMPFLAGS="-M no-aliases --section=.text -D"
+		${CROSS_COMPILE}strip $t.o
+	fi
+
+	if [ "$ARCH" = "loongarch" ]; then
+		${CROSS_COMPILE}strip $t.o
+	fi
+
+	if [ $pc_sub -ne 0 ]; then
+		if [ $PC ]; then
+			adj_vma=$(( $PC - $pc_sub ))
+			OBJDUMPFLAGS="$OBJDUMPFLAGS --adjust-vma=$adj_vma"
+		fi
+	fi
+
+	${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $t.o | \
+		grep -v "/tmp\|Disassembly\|\.text\|^$" > $t.dis 2>&1
+}
+
+# Match the maximum number of opcode bytes from @op_bytes contained within
+# @opline
+#
+# Params:
+# @op_bytes: The string of bytes from the Code: line
+# @opline: The disassembled line coming from objdump
+#
+# Returns:
+# The max number of opcode bytes from the beginning of @op_bytes which match
+# the opcode bytes in the objdump line.
+get_substr_opcode_bytes_num()
+{
+	local op_bytes=$1
+	local opline=$2
+
+	local retval=0
+	substr=""
+
+	for opc in $op_bytes;
+	do
+		substr+="$opc"
+
+		opcode="$substr"
+		if [ "$ARCH" = "riscv" ]; then
+			opcode=$(echo $opcode | tr ' ' '\n' | tac | tr -d '\n')
+		fi
+
+		# return if opcode bytes do not match @opline anymore
+		if ! echo $opline | grep -q "$opcode";
+		then
+			break
+		fi
+
+		# add trailing space
+		substr+=" "
+		retval=$((retval+1))
+	done
+
+	return $retval
+}
+
+# Return the line number in objdump output to where the IP marker in the Code:
+# line points to
+#
+# Params:
+# @all_code: code in bytes without the marker
+# @dis_file: disassembled file
+# @ip_byte: The byte to which the IP points to
+get_faultlinenum()
+{
+	local all_code="$1"
+	local dis_file="$2"
+
+	# num bytes including IP byte
+	local num_bytes_ip=$(( $3 + 1 * $width ))
+
+	# Add the two header lines (we're counting from 1).
+	local retval=3
+
+	# remove marker
+	all_code=$(echo $all_code | sed -e 's/[<>()]//g')
+
+	while read line
+	do
+		get_substr_opcode_bytes_num "$all_code" "$line"
+		ate_opcodes=$?
+
+		if ! (( $ate_opcodes )); then
+			continue
+		fi
+
+		num_bytes_ip=$((num_bytes_ip - ($ate_opcodes * $width) ))
+		if (( $num_bytes_ip <= 0 )); then
+			break
+		fi
+
+		# Delete matched opcode bytes from all_code. For that, compute
+		# how many chars those opcodes are represented by and include
+		# trailing space.
+		#
+		# a byte is 2 chars, ate_opcodes is also the number of trailing
+		# spaces
+		del_chars=$(( ($ate_opcodes * $width * 2) + $ate_opcodes ))
+
+		all_code=$(echo $all_code | sed -e "s!^.\{$del_chars\}!!")
+
+		let "retval+=1"
+
+	done < $dis_file
+
+	return $retval
+}
+
+marker=`expr index "$code" "\<"`
+if [ $marker -eq 0 ]; then
+	marker=`expr index "$code" "\("`
+fi
+
+touch $T.oo
+if [ $marker -ne 0 ]; then
+	# How many bytes to subtract from the program counter
+	# in order to get to the beginning virtual address of the
+	# Code:
+	pc_sub=$(( (($marker - 1) / (2 * $width + 1)) * $width ))
+	echo All code >> $T.oo
+	echo ======== >> $T.oo
+	beforemark=`echo "$code"`
+	echo -n "	.$type 0x" > $T.s
+
+	echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
+
+	disas $T $pc_sub
+
+	cat $T.dis >> $T.oo
+
+	get_faultlinenum "$code" "$T.dis" $pc_sub
+	faultlinenum=$?
+
+	# and fix code at-and-after marker
+	code=`echo "$code" | cut -c$((${marker} + 1))-`
+
+	rm -f $T.o $T.s $T.dis
+fi
+
+echo Code starting with the faulting instruction  > $T.aa
+echo =========================================== >> $T.aa
+code=`echo $code | sed -e 's/\r//;s/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
+echo -n "	.$type 0x" > $T.s
+echo $code >> $T.s
+disas $T 0
+cat $T.dis >> $T.aa
+
+cat $T.oo | sed -e "${faultlinenum}s/^\([^:]*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
+echo
+cat $T.aa
+cleanup