Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/scripts/cleanfile b/scripts/cleanfile
new file mode 100755
index 000000000..c00c69b91
--- /dev/null
+++ b/scripts/cleanfile
@@ -0,0 +1,178 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+#
+# Clean a text file -- or directory of text files -- of stealth whitespace.
+# WARNING: this can be a highly destructive operation.  Use with caution.
+#
+
+use warnings;
+use bytes;
+use File::Basename;
+
+# Default options
+$max_width = 79;
+
+# Clean up space-tab sequences, either by removing spaces or
+# replacing them with tabs.
+sub clean_space_tabs($)
+{
+    no bytes;			# Tab alignment depends on characters
+
+    my($li) = @_;
+    my($lo) = '';
+    my $pos = 0;
+    my $nsp = 0;
+    my($i, $c);
+
+    for ($i = 0; $i < length($li); $i++) {
+	$c = substr($li, $i, 1);
+	if ($c eq "\t") {
+	    my $npos = ($pos+$nsp+8) & ~7;
+	    my $ntab = ($npos >> 3) - ($pos >> 3);
+	    $lo .= "\t" x $ntab;
+	    $pos = $npos;
+	    $nsp = 0;
+	} elsif ($c eq "\n" || $c eq "\r") {
+	    $lo .= " " x $nsp;
+	    $pos += $nsp;
+	    $nsp = 0;
+	    $lo .= $c;
+	    $pos = 0;
+	} elsif ($c eq " ") {
+	    $nsp++;
+	} else {
+	    $lo .= " " x $nsp;
+	    $pos += $nsp;
+	    $nsp = 0;
+	    $lo .= $c;
+	    $pos++;
+	}
+    }
+    $lo .= " " x $nsp;
+    return $lo;
+}
+
+# Compute the visual width of a string
+sub strwidth($) {
+    no bytes;			# Tab alignment depends on characters
+
+    my($li) = @_;
+    my($c, $i);
+    my $pos = 0;
+    my $mlen = 0;
+
+    for ($i = 0; $i < length($li); $i++) {
+	$c = substr($li,$i,1);
+	if ($c eq "\t") {
+	    $pos = ($pos+8) & ~7;
+	} elsif ($c eq "\n") {
+	    $mlen = $pos if ($pos > $mlen);
+	    $pos = 0;
+	} else {
+	    $pos++;
+	}
+    }
+
+    $mlen = $pos if ($pos > $mlen);
+    return $mlen;
+}
+
+$name = basename($0);
+
+@files = ();
+
+while (defined($a = shift(@ARGV))) {
+    if ($a =~ /^-/) {
+	if ($a eq '-width' || $a eq '-w') {
+	    $max_width = shift(@ARGV)+0;
+	} else {
+	    print STDERR "Usage: $name [-width #] files...\n";
+	    exit 1;
+	}
+    } else {
+	push(@files, $a);
+    }
+}
+
+foreach $f ( @files ) {
+    print STDERR "$name: $f\n";
+
+    if (! -f $f) {
+	print STDERR "$f: not a file\n";
+	next;
+    }
+
+    if (!open(FILE, '+<', $f)) {
+	print STDERR "$name: Cannot open file: $f: $!\n";
+	next;
+    }
+
+    binmode FILE;
+
+    # First, verify that it is not a binary file; consider any file
+    # with a zero byte to be a binary file.  Is there any better, or
+    # additional, heuristic that should be applied?
+    $is_binary = 0;
+
+    while (read(FILE, $data, 65536) > 0) {
+	if ($data =~ /\0/) {
+	    $is_binary = 1;
+	    last;
+	}
+    }
+
+    if ($is_binary) {
+	print STDERR "$name: $f: binary file\n";
+	next;
+    }
+
+    seek(FILE, 0, 0);
+
+    $in_bytes = 0;
+    $out_bytes = 0;
+    $blank_bytes = 0;
+
+    @blanks = ();
+    @lines  = ();
+    $lineno = 0;
+
+    while ( defined($line = <FILE>) ) {
+	$lineno++;
+	$in_bytes += length($line);
+	$line =~ s/[ \t\r]*$//;		# Remove trailing spaces
+	$line = clean_space_tabs($line);
+
+	if ( $line eq "\n" ) {
+	    push(@blanks, $line);
+	    $blank_bytes += length($line);
+	} else {
+	    push(@lines, @blanks);
+	    $out_bytes += $blank_bytes;
+	    push(@lines, $line);
+	    $out_bytes += length($line);
+	    @blanks = ();
+	    $blank_bytes = 0;
+	}
+
+	$l_width = strwidth($line);
+	if ($max_width && $l_width > $max_width) {
+	    print STDERR
+		"$f:$lineno: line exceeds $max_width characters ($l_width)\n";
+	}
+    }
+
+    # Any blanks at the end of the file are discarded
+
+    if ($in_bytes != $out_bytes) {
+	# Only write to the file if changed
+	seek(FILE, 0, 0);
+	print FILE @lines;
+
+	if ( !defined($where = tell(FILE)) ||
+	     !truncate(FILE, $where) ) {
+	    die "$name: Failed to truncate modified file: $f: $!\n";
+	}
+    }
+
+    close(FILE);
+}