virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 147 insertions, 0 deletions

diff --git a/scripts/check_extable.sh b/scripts/check_extable.sh
new file mode 100755
index 000000000..4b380564c
--- /dev/null
+++ b/scripts/check_extable.sh
@@ -0,0 +1,147 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# (c) 2015, Quentin Casasnovas <quentin.casasnovas@oracle.com>
+
+obj=$1
+
+file ${obj} | grep -q ELF || (echo "${obj} is not an ELF file." 1>&2 ; exit 0)
+
+# Bail out early if there isn't an __ex_table section in this object file.
+objdump -hj __ex_table ${obj} 2> /dev/null > /dev/null
+[ $? -ne 0 ] && exit 0
+
+white_list=.text,.fixup
+
+suspicious_relocs=$(objdump -rj __ex_table ${obj}  | tail -n +6 |
+			grep -v $(eval echo -e{${white_list}}) | awk '{print $3}')
+
+# No suspicious relocs in __ex_table, jobs a good'un
+[ -z "${suspicious_relocs}" ] && exit 0
+
+
+# After this point, something is seriously wrong since we just found out we
+# have some relocations in __ex_table which point to sections which aren't
+# white listed.  If you're adding a new section in the Linux kernel, and
+# you're expecting this section to contain code which can fault (i.e. the
+# __ex_table relocation to your new section is expected), simply add your
+# new section to the white_list variable above.  If not, you're probably
+# doing something wrong and the rest of this code is just trying to print
+# you more information about it.
+
+function find_section_offset_from_symbol()
+{
+    eval $(objdump -t ${obj} | grep ${1} | sed 's/\([0-9a-f]\+\) .\{7\} \([^ \t]\+\).*/section="\2"; section_offset="0x\1" /')
+
+    # addr2line takes addresses in hexadecimal...
+    section_offset=$(printf "0x%016x" $(( ${section_offset} + $2 )) )
+}
+
+function find_symbol_and_offset_from_reloc()
+{
+    # Extract symbol and offset from the objdump output
+    eval $(echo $reloc | sed 's/\([^+]\+\)+\?\(0x[0-9a-f]\+\)\?/symbol="\1"; symbol_offset="\2"/')
+
+    # When the relocation points to the begining of a symbol or section, it
+    # won't print the offset since it is zero.
+    if [ -z "${symbol_offset}" ]; then
+	symbol_offset=0x0
+    fi
+}
+
+function find_alt_replacement_target()
+{
+    # The target of the .altinstr_replacement is the relocation just before
+    # the .altinstr_replacement one.
+    eval $(objdump -rj .altinstructions ${obj} | grep -B1 "${section}+${section_offset}" | head -n1 | awk '{print $3}' |
+	   sed 's/\([^+]\+\)+\(0x[0-9a-f]\+\)/alt_target_section="\1"; alt_target_offset="\2"/')
+}
+
+function handle_alt_replacement_reloc()
+{
+    # This will define alt_target_section and alt_target_section_offset
+    find_alt_replacement_target ${section} ${section_offset}
+
+    echo "Error: found a reference to .altinstr_replacement in __ex_table:"
+    addr2line -fip -j ${alt_target_section} -e ${obj} ${alt_target_offset} | awk '{print "\t" $0}'
+
+    error=true
+}
+
+function is_executable_section()
+{
+    objdump -hwj ${section} ${obj} | grep -q CODE
+    return $?
+}
+
+function handle_suspicious_generic_reloc()
+{
+    if is_executable_section ${section}; then
+	# We've got a relocation to a non white listed _executable_
+	# section, print a warning so the developper adds the section to
+	# the white list or fix his code.  We try to pretty-print the file
+	# and line number where that relocation was added.
+	echo "Warning: found a reference to section \"${section}\" in __ex_table:"
+	addr2line -fip -j ${section} -e ${obj} ${section_offset} | awk '{print "\t" $0}'
+    else
+	# Something is definitively wrong here since we've got a relocation
+	# to a non-executable section, there's no way this would ever be
+	# running in the kernel.
+	echo "Error: found a reference to non-executable section \"${section}\" in __ex_table at offset ${section_offset}"
+	error=true
+    fi
+}
+
+function handle_suspicious_reloc()
+{
+    case "${section}" in
+	".altinstr_replacement")
+	    handle_alt_replacement_reloc ${section} ${section_offset}
+	    ;;
+	*)
+	    handle_suspicious_generic_reloc ${section} ${section_offset}
+	    ;;
+    esac
+}
+
+function diagnose()
+{
+
+    for reloc in ${suspicious_relocs}; do
+	# Let's find out where the target of the relocation in __ex_table
+	# is, this will define ${symbol} and ${symbol_offset}
+	find_symbol_and_offset_from_reloc ${reloc}
+
+	# When there's a global symbol at the place of the relocation,
+	# objdump will use it instead of giving us a section+offset, so
+	# let's find out which section is this symbol in and the total
+	# offset withing that section.
+	find_section_offset_from_symbol ${symbol} ${symbol_offset}
+
+	# In this case objdump was presenting us with a reloc to a symbol
+	# rather than a section. Now that we've got the actual section,
+	# we can skip it if it's in the white_list.
+	if [ -z "$( echo $section | grep -v $(eval echo -e{${white_list}}))" ]; then
+	    continue;
+	fi
+
+	# Will either print a warning if the relocation happens to be in a
+	# section we do not know but has executable bit set, or error out.
+	handle_suspicious_reloc
+    done
+}
+
+function check_debug_info() {
+    objdump -hj .debug_info ${obj} 2> /dev/null > /dev/null ||
+	echo -e "${obj} does not contain debug information, the addr2line output will be limited.\n" \
+	     "Recompile ${obj} with CONFIG_DEBUG_INFO to get a more useful output."
+}
+
+check_debug_info
+
+diagnose
+
+if [ "${error}" ]; then
+    exit 1
+fi
+
+exit 0