drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 440 insertions, 0 deletions

diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
new file mode 100644
index 000000000..54063d980
--- /dev/null
+++ b/scripts/basic/fixdep.c
@@ -0,0 +1,440 @@
+/*
+ * "Optimize" a list of dependencies as spit out by gcc -MD
+ * for the kernel build
+ * ===========================================================================
+ *
+ * Author       Kai Germaschewski
+ * Copyright    2002 by Kai Germaschewski  <kai.germaschewski@gmx.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ *
+ * Introduction:
+ *
+ * gcc produces a very nice and correct list of dependencies which
+ * tells make when to remake a file.
+ *
+ * However, to use this list as-is has the drawback that virtually
+ * every file in the kernel includes autoconf.h.
+ *
+ * If the user re-runs make *config, autoconf.h will be
+ * regenerated.  make notices that and will rebuild every file which
+ * includes autoconf.h, i.e. basically all files. This is extremely
+ * annoying if the user just changed CONFIG_USER_DRIVER from n to m.
+ *
+ * So we play the same trick that "mkdep" played before. We replace
+ * the dependency on autoconf.h by a dependency on every config
+ * option which is mentioned in any of the listed prerequisites.
+ *
+ * kconfig populates a tree in include/config/ with an empty file
+ * for each config symbol and when the configuration is updated
+ * the files representing changed config options are touched
+ * which then let make pick up the changes and the files that use
+ * the config symbols are rebuilt.
+ *
+ * So if the user changes their CONFIG_USER_DRIVER option, only the objects
+ * which depend on "include/config/USER_DRIVER" will be rebuilt,
+ * so most likely only the user's driver ;-)
+ *
+ * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
+ *
+ * So to get dependencies right, there are two issues:
+ * o if any of the files the compiler read changed, we need to rebuild
+ * o if the command line given to the compile the file changed, we
+ *   better rebuild as well.
+ *
+ * The former is handled by using the -MD output, the later by saving
+ * the command line used to compile the old object and comparing it
+ * to the one we would now use.
+ *
+ * Again, also this idea is pretty old and has been discussed on
+ * kbuild-devel a long time ago. I don't have a sensibly working
+ * internet connection right now, so I rather don't mention names
+ * without double checking.
+ *
+ * This code here has been based partially based on mkdep.c, which
+ * says the following about its history:
+ *
+ *   Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
+ *   This is a C version of syncdep.pl by Werner Almesberger.
+ *
+ *
+ * It is invoked as
+ *
+ *   fixdep <depfile> <target> <cmdline>
+ *
+ * and will read the dependency file <depfile>
+ *
+ * The transformed dependency snipped is written to stdout.
+ *
+ * It first generates a line
+ *
+ *   savedcmd_<target> = <cmdline>
+ *
+ * and then basically copies the .<target>.d file to stdout, in the
+ * process filtering out the dependency on autoconf.h and adding
+ * dependencies on include/config/MY_OPTION for every
+ * CONFIG_MY_OPTION encountered in any of the prerequisites.
+ *
+ * We don't even try to really parse the header files, but
+ * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
+ * be picked up as well. It's not a problem with respect to
+ * correctness, since that can only give too many dependencies, thus
+ * we cannot miss a rebuild. Since people tend to not mention totally
+ * unrelated CONFIG_ options all over the place, it's not an
+ * efficiency problem either.
+ *
+ * (Note: it'd be easy to port over the complete mkdep state machine,
+ *  but I don't think the added complexity is worth it)
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <ctype.h>
+
+#include <xalloc.h>
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
+	exit(1);
+}
+
+struct item {
+	struct item	*next;
+	unsigned int	len;
+	unsigned int	hash;
+	char		name[];
+};
+
+#define HASHSZ 256
+static struct item *config_hashtab[HASHSZ], *file_hashtab[HASHSZ];
+
+static unsigned int strhash(const char *str, unsigned int sz)
+{
+	/* fnv32 hash */
+	unsigned int i, hash = 2166136261U;
+
+	for (i = 0; i < sz; i++)
+		hash = (hash ^ str[i]) * 0x01000193;
+	return hash;
+}
+
+/*
+ * Add a new value to the configuration string.
+ */
+static void add_to_hashtable(const char *name, int len, unsigned int hash,
+			     struct item *hashtab[])
+{
+	struct item *aux;
+
+	aux = xmalloc(sizeof(*aux) + len);
+	memcpy(aux->name, name, len);
+	aux->len = len;
+	aux->hash = hash;
+	aux->next = hashtab[hash % HASHSZ];
+	hashtab[hash % HASHSZ] = aux;
+}
+
+/*
+ * Lookup a string in the hash table. If found, just return true.
+ * If not, add it to the hashtable and return false.
+ */
+static bool in_hashtable(const char *name, int len, struct item *hashtab[])
+{
+	struct item *aux;
+	unsigned int hash = strhash(name, len);
+
+	for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
+		if (aux->hash == hash && aux->len == len &&
+		    memcmp(aux->name, name, len) == 0)
+			return true;
+	}
+
+	add_to_hashtable(name, len, hash, hashtab);
+
+	return false;
+}
+
+/*
+ * Record the use of a CONFIG_* word.
+ */
+static void use_config(const char *m, int slen)
+{
+	if (in_hashtable(m, slen, config_hashtab))
+		return;
+
+	/* Print out a dependency path from a symbol name. */
+	printf("    $(wildcard include/config/%.*s) \\\n", slen, m);
+}
+
+/* test if s ends in sub */
+static int str_ends_with(const char *s, int slen, const char *sub)
+{
+	int sublen = strlen(sub);
+
+	if (sublen > slen)
+		return 0;
+
+	return !memcmp(s + slen - sublen, sub, sublen);
+}
+
+static void parse_config_file(const char *p)
+{
+	const char *q, *r;
+	const char *start = p;
+
+	while ((p = strstr(p, "CONFIG_"))) {
+		if (p > start && (isalnum(p[-1]) || p[-1] == '_')) {
+			p += 7;
+			continue;
+		}
+		p += 7;
+		q = p;
+		while (isalnum(*q) || *q == '_')
+			q++;
+		if (str_ends_with(p, q - p, "_MODULE"))
+			r = q - 7;
+		else
+			r = q;
+		if (r > p)
+			use_config(p, r - p);
+		p = q;
+	}
+}
+
+static void *read_file(const char *filename)
+{
+	struct stat st;
+	int fd;
+	char *buf;
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "fixdep: error opening file: ");
+		perror(filename);
+		exit(2);
+	}
+	if (fstat(fd, &st) < 0) {
+		fprintf(stderr, "fixdep: error fstat'ing file: ");
+		perror(filename);
+		exit(2);
+	}
+	buf = xmalloc(st.st_size + 1);
+	if (read(fd, buf, st.st_size) != st.st_size) {
+		perror("fixdep: read");
+		exit(2);
+	}
+	buf[st.st_size] = '\0';
+	close(fd);
+
+	return buf;
+}
+
+/* Ignore certain dependencies */
+static int is_ignored_file(const char *s, int len)
+{
+	return str_ends_with(s, len, "include/generated/autoconf.h");
+}
+
+/* Do not parse these files */
+static int is_no_parse_file(const char *s, int len)
+{
+	/* rustc may list binary files in dep-info */
+	return str_ends_with(s, len, ".rlib") ||
+	       str_ends_with(s, len, ".rmeta") ||
+	       str_ends_with(s, len, ".so");
+}
+
+/*
+ * Important: The below generated source_foo.o and deps_foo.o variable
+ * assignments are parsed not only by make, but also by the rather simple
+ * parser in scripts/mod/sumversion.c.
+ */
+static void parse_dep_file(char *p, const char *target)
+{
+	bool saw_any_target = false;
+	bool is_target = true;
+	bool is_source = false;
+	bool need_parse;
+	char *q, saved_c;
+
+	while (*p) {
+		/* handle some special characters first. */
+		switch (*p) {
+		case '#':
+			/*
+			 * skip comments.
+			 * rustc may emit comments to dep-info.
+			 */
+			p++;
+			while (*p != '\0' && *p != '\n') {
+				/*
+				 * escaped newlines continue the comment across
+				 * multiple lines.
+				 */
+				if (*p == '\\')
+					p++;
+				p++;
+			}
+			continue;
+		case ' ':
+		case '\t':
+			/* skip whitespaces */
+			p++;
+			continue;
+		case '\\':
+			/*
+			 * backslash/newline combinations continue the
+			 * statement. Skip it just like a whitespace.
+			 */
+			if (*(p + 1) == '\n') {
+				p += 2;
+				continue;
+			}
+			break;
+		case '\n':
+			/*
+			 * Makefiles use a line-based syntax, where the newline
+			 * is the end of a statement. After seeing a newline,
+			 * we expect the next token is a target.
+			 */
+			p++;
+			is_target = true;
+			continue;
+		case ':':
+			/*
+			 * assume the first dependency after a colon as the
+			 * source file.
+			 */
+			p++;
+			is_target = false;
+			is_source = true;
+			continue;
+		}
+
+		/* find the end of the token */
+		q = p;
+		while (*q != ' ' && *q != '\t' && *q != '\n' && *q != '#' && *q != ':') {
+			if (*q == '\\') {
+				/*
+				 * backslash/newline combinations work like as
+				 * a whitespace, so this is the end of token.
+				 */
+				if (*(q + 1) == '\n')
+					break;
+
+				/* escaped special characters */
+				if (*(q + 1) == '#' || *(q + 1) == ':') {
+					memmove(p + 1, p, q - p);
+					p++;
+				}
+
+				q++;
+			}
+
+			if (*q == '\0')
+				break;
+			q++;
+		}
+
+		/* Just discard the target */
+		if (is_target) {
+			p = q;
+			continue;
+		}
+
+		saved_c = *q;
+		*q = '\0';
+		need_parse = false;
+
+		/*
+		 * Do not list the source file as dependency, so that kbuild is
+		 * not confused if a .c file is rewritten into .S or vice versa.
+		 * Storing it in source_* is needed for modpost to compute
+		 * srcversions.
+		 */
+		if (is_source) {
+			/*
+			 * The DT build rule concatenates multiple dep files.
+			 * When processing them, only process the first source
+			 * name, which will be the original one, and ignore any
+			 * other source names, which will be intermediate
+			 * temporary files.
+			 *
+			 * rustc emits the same dependency list for each
+			 * emission type. It is enough to list the source name
+			 * just once.
+			 */
+			if (!saw_any_target) {
+				saw_any_target = true;
+				printf("source_%s := %s\n\n", target, p);
+				printf("deps_%s := \\\n", target);
+				need_parse = true;
+			}
+		} else if (!is_ignored_file(p, q - p) &&
+			   !in_hashtable(p, q - p, file_hashtab)) {
+			printf("  %s \\\n", p);
+			need_parse = true;
+		}
+
+		if (need_parse && !is_no_parse_file(p, q - p)) {
+			void *buf;
+
+			buf = read_file(p);
+			parse_config_file(buf);
+			free(buf);
+		}
+
+		is_source = false;
+		*q = saved_c;
+		p = q;
+	}
+
+	if (!saw_any_target) {
+		fprintf(stderr, "fixdep: parse error; no targets found\n");
+		exit(1);
+	}
+
+	printf("\n%s: $(deps_%s)\n\n", target, target);
+	printf("$(deps_%s):\n", target);
+}
+
+int main(int argc, char *argv[])
+{
+	const char *depfile, *target, *cmdline;
+	void *buf;
+
+	if (argc != 4)
+		usage();
+
+	depfile = argv[1];
+	target = argv[2];
+	cmdline = argv[3];
+
+	printf("savedcmd_%s := %s\n\n", target, cmdline);
+
+	buf = read_file(depfile);
+	parse_dep_file(buf, target);
+	free(buf);
+
+	fflush(stdout);
+
+	/*
+	 * In the intended usage, the stdout is redirected to .*.cmd files.
+	 * Call ferror() to catch errors such as "No space left on device".
+	 */
+	if (ferror(stdout)) {
+		fprintf(stderr, "fixdep: not all data was written to the output\n");
+		exit(1);
+	}
+
+	return 0;
+}