virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 451 insertions, 0 deletions

diff --git a/scripts/bash-completion/make b/scripts/bash-completion/make
new file mode 100644
index 000000000..42e8dcead
--- /dev/null
+++ b/scripts/bash-completion/make
@@ -0,0 +1,451 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# bash completion for GNU make with kbuild extension       -*- shell-script -*-
+
+# Load the default completion script for make. It is typically located at
+# /usr/share/bash-completion/completions/make, but we do not rely on it.
+__kbuild_load_default_make_completion()
+{
+	local -a dirs=("${BASH_COMPLETION_USER_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/bash-completion}/completions")
+	local ifs=$IFS IFS=: dir compfile this_dir
+
+	for dir in ${XDG_DATA_DIRS:-/usr/local/share:/usr/share}; do
+	        dirs+=("$dir"/bash-completion/completions)
+	done
+	IFS=$ifs
+
+	this_dir="$(realpath "$(dirname "${BASH_SOURCE[0]}")")"
+
+	for dir in "${dirs[@]}"; do
+		if [[ ! -d ${dir} || ${dir} = "${this_dir}" ]]; then
+			continue
+		fi
+
+		for compfile in make make.bash _make; do
+			compfile=$dir/$compfile
+			# Avoid trying to source dirs; https://bugzilla.redhat.com/903540
+			if [[ -f ${compfile} ]] && . "${compfile}" &>/dev/null; then
+
+				__kbuild_default_make_completion=$(
+					# shellcheck disable=SC2046 # word splitting is the point here
+					set -- $(complete -p make)
+
+					while [[ $# -gt 1 && "$1" != -F ]]; do
+						shift
+					done
+
+					if [[ "$1" = -F ]]; then
+						echo "$2"
+					fi
+				)
+
+				return
+			fi
+		done
+	done
+}
+
+__kbuild_load_default_make_completion
+
+__kbuild_handle_variable()
+{
+	local var=${1%%=*}
+	local cur=${cur#"${var}"=}
+	local srctree=$2
+	local keywords=()
+
+	case $var in
+	ARCH)
+		# sub-directories under arch/
+		keywords+=($(find "${srctree}/arch" -mindepth 1 -maxdepth 1 -type d -printf '%P\n'))
+		# architectures hard-coded in the top Makefile
+		keywords+=(i386 x86_64 sparc32 sparc64 parisc64)
+		;;
+	CROSS_COMPILE)
+		# toolchains with a full path
+		local cross_compile=()
+		local c c2
+		_filedir
+
+		for c in "${COMPREPLY[@]}"; do
+			# eval for tilde expansion
+			# suppress error, as this fails when it contains a space
+			eval "c2=${c}" 2>/dev/null || continue
+			if [[ ${c} == *-elfedit && ! -d ${c2} && -x ${c2} ]]; then
+				cross_compile+=("${c%elfedit}")
+			fi
+		done
+
+		# toolchains in the PATH environment
+		while read -r c; do
+			if [[ ${c} == *-elfedit ]]; then
+				keywords+=("${c%elfedit}")
+			fi
+		done < <(compgen -c)
+
+		COMPREPLY=()
+		_filedir -d
+
+		# Add cross_compile directly without passing it to compgen.
+		# Otherwise, toolchain paths with a tilde do not work.
+		# e.g.)
+		#   CROSS_COMPILE=~/0day/gcc-14.2.0-nolibc/aarch64-linux/bin/aarch64-linux-
+		COMPREPLY+=("${cross_compile[@]}")
+		;;
+	LLVM)
+		# LLVM=1 uses the default 'clang' etc.
+		keywords+=(1)
+
+		# suffix for a particular version. LLVM=-18 uses 'clang-18' etc.
+		while read -r c; do
+			if [[ ${c} == clang-[0-9]* ]]; then
+				keywords+=("${c#clang}")
+			fi
+		done < <(compgen -c)
+
+		# directory path to LLVM toolchains
+		_filedir -d
+		;;
+	KCONFIG_ALLCONFIG)
+		# KCONFIG_ALLCONFIG=1 selects the default fragment
+		keywords+=(1)
+		# or the path to a fragment file
+		_filedir
+		;;
+	C | KBUILD_CHECKSRC)
+		keywords+=(1 2)
+		;;
+	V | KBUILD_VERBOSE)
+		keywords+=({,1}{,2})
+		;;
+	W | KBUILD_EXTRA_WARN)
+		keywords+=({,1}{,2}{,3}{,c}{,e})
+		;;
+	KBUILD_ABS_SRCTREE | KBUILD_MODPOST_NOFINAL | KBUILD_MODPOST_WARN | \
+		CLIPPY | KBUILD_CLIPPY | KCONFIG_NOSILENTUPDATE | \
+		KCONFIG_OVERWRITECONFIG | KCONFIG_WARN_UNKNOWN_SYMBOL | \
+		KCONFIG_WERROR )
+		keywords+=(1)
+		;;
+	INSTALL_MOD_STRIP)
+		keywords+=(1 --strip-debug --strip-unneeded)
+		;;
+	O | KBUILD_OUTPUT | M | KBUILD_EXTMOD | MO | KBUILD_EXTMOD_OUTPUT | *_PATH)
+		# variables that take a directory.
+		_filedir -d
+		return
+		;;
+	KBUILD_EXTRA_SYMBOL | KBUILD_KCONFIG | KCONFIG_CONFIG)
+		# variables that take a file.
+		_filedir
+		return
+	esac
+
+	COMPREPLY+=($(compgen -W "${keywords[*]}" -- "${cur}"))
+}
+
+# Check the -C, -f options and 'source' symlink. Return the source tree we are
+# working in.
+__kbuild_get_srctree()
+{
+	local words=("$@")
+	local cwd makef_dir
+
+	# see if a path was specified with -C/--directory
+	for ((i = 1; i < ${#words[@]}; i++)); do
+		if [[ ${words[i]} == -@(C|-directory) ]]; then
+			# eval for tilde expansion.
+			# suppress error, as this fails when it contains a space
+			eval "cwd=${words[i + 1]}" 2>/dev/null
+			break
+		fi
+	done
+
+	if [[ -z ${cwd} ]]; then
+		cwd=.
+	fi
+
+	# see if a Makefile was specified with -f/--file/--makefile
+	for ((i = 1; i < ${#words[@]}; i++)); do
+		if [[ ${words[i]} == -@(f|-?(make)file) ]]; then
+			# eval for tilde expansion
+			# suppress error, as this fails when it contains a space
+			eval "makef_dir=${words[i + 1]%/*}" 2>/dev/null
+			break
+		fi
+	done
+
+	if [ -z "${makef_dir}" ]; then
+		makef_dir=${cwd}
+	elif [[ ${makef_dir} != /* ]]; then
+		makef_dir=${cwd}/${makef_dir}
+	fi
+
+	# If ${makef_dir} is a build directory created by the O= option, there
+	# is a symbolic link 'source', which points to the kernel source tree.
+	if [[ -L ${makef_dir}/source ]]; then
+		makef_dir=$(readlink "${makef_dir}/source")
+	fi
+
+	echo "${makef_dir}"
+}
+
+# Get SRCARCH to do a little more clever things
+__kbuild_get_srcarch()
+{
+	local words=("$@")
+	local arch srcarch uname_m
+
+	# see if ARCH= is explicitly specified
+	for ((i = 1; i < ${#words[@]}; i++)); do
+		if [[ ${words[i]} == ARCH=* ]]; then
+			arch=${words[i]#ARCH=}
+			break
+		fi
+	done
+
+	# If ARCH= is not specified, check the build marchine's architecture
+	if [[ -z ${arch} ]]; then
+		uname_m=$(uname -m)
+
+		# shellcheck disable=SC2209 # 'sh' is SuperH, not a shell command
+		case ${uname_m} in
+		arm64 | aarch64*) arch=arm64 ;;
+		arm* | sa110)     arch=arm ;;
+		i?86 | x86_64)    arch=x86 ;;
+		loongarch*)       arch=loongarch ;;
+		mips*)            arch=mips ;;
+		ppc*)             arch=powerpc ;;
+		riscv*)           arch=riscv ;;
+		s390x)            arch=s390 ;;
+		sh[234]*)         arch=sh ;;
+		sun4u)            arch=sparc64 ;;
+		*)                arch=${uname_m} ;;
+		esac
+	fi
+
+	case ${arch} in
+		parisc64)          srcarch=parisc ;;
+		sparc32 | sparc64) srcarch=sparc ;;
+		i386 | x86_64)     srcarch=x86 ;;
+		*)                 srcarch=${arch} ;;
+	esac
+
+	echo "$srcarch"
+}
+
+# small Makefile to parse obj-* syntax
+__kbuild_tmp_makefile()
+{
+cat <<'EOF'
+.PHONY: __default
+__default:
+	$(foreach m,$(obj-y) $(obj-m) $(obj-),$(foreach s, -objs -y -m -,$($(m:%.o=%$s))) $(m))
+EOF
+echo "include ${1}"
+}
+
+_make_for_kbuild ()
+{
+	# shellcheck disable=SC2034 # these are set by _init_completion
+	local cur prev words cword split
+	_init_completion -s || return
+
+	local srctree
+	srctree=$(__kbuild_get_srctree "${words[@]}")
+
+	# If 'kernel' and 'Documentation' directories are found, we assume this
+	# is a kernel tree. Otherwise, we fall back to the generic rule provided
+	# by the bash-completion project.
+	if [[ ! -d ${srctree}/kernel || ! -d ${srctree}/Documentation ]]; then
+		if [ -n "${__kbuild_default_make_completion}" ]; then
+			"${__kbuild_default_make_completion}" "$@"
+		fi
+		return
+	fi
+
+	# make options with a parameter (copied from the bash-completion project)
+	case ${prev} in
+	--file | --makefile | --old-file | --assume-old | --what-if | --new-file | \
+		--assume-new | -!(-*)[foW])
+		_filedir
+		return
+		;;
+	--include-dir | --directory | -!(-*)[ICm])
+		_filedir -d
+		return
+		;;
+	-!(-*)E)
+		COMPREPLY=($(compgen -v -- "$cur"))
+		return
+		;;
+	--eval | -!(-*)[DVx])
+		return
+		;;
+	--jobs | -!(-*)j)
+		COMPREPLY=($(compgen -W "{1..$(($(_ncpus) * 2))}" -- "$cur"))
+		return
+		;;
+	esac
+
+	local keywords=()
+
+	case ${cur} in
+	-*)
+		# make options (copied from the bash-completion project)
+		local opts
+		opts="$(_parse_help "$1")"
+		COMPREPLY=($(compgen -W "${opts:-$(_parse_usage "$1")}" -- "$cur"))
+		if [[ ${COMPREPLY-} == *= ]]; then
+			compopt -o nospace
+		fi
+		return
+		;;
+	*=*)
+		__kbuild_handle_variable "${cur}" "${srctree}"
+		return
+		;;
+	KBUILD_*)
+		# There are many variables prefixed with 'KBUILD_'.
+		# Display them only when 'KBUILD_' is entered.
+		# shellcheck disable=SC2191 # '=' is appended for variables
+		keywords+=(
+			KBUILD_{CHECKSRC,EXTMOD,EXTMOD_OUTPUT,OUTPUT,VERBOSE,EXTRA_WARN,CLIPPY}=
+			KBUILD_BUILD_{USER,HOST,TIMESTAMP}=
+			KBUILD_MODPOST_{NOFINAL,WARN}=
+			KBUILD_{ABS_SRCTREE,EXTRA_SYMBOLS,KCONFIG}=
+		)
+		;;
+	KCONFIG_*)
+		# There are many variables prefixed with 'KCONFIG_'.
+		# Display them only when 'KCONFIG_' is entered.
+		# shellcheck disable=SC2191 # '=' is appended for variables
+		keywords+=(
+			KCONFIG_{CONFIG,ALLCONFIG,NOSILENTUPDATE,OVERWRITECONFIG}=
+			KCONFIG_{SEED,PROBABILITY}=
+			KCONFIG_WARN_UNKNOWN_SYMBOL=
+			KCONFIG_WERROR=
+		)
+		;;
+	*)
+		# By default, hide KBUILD_* and KCONFIG_* variables.
+		# Instead, display only the prefix parts.
+		keywords+=(KBUILD_ KCONFIG_)
+		;;
+	esac
+
+	if [[ ${cur} != /* && ${cur} != *//* ]]; then
+		local dir srcarch kbuild_file tmp
+		srcarch=$(__kbuild_get_srcarch "${words[@]}")
+
+		# single build
+		dir=${cur}
+		while true; do
+			if [[ ${dir} == */* ]]; then
+				dir=${dir%/*}
+			else
+				dir=.
+			fi
+
+			# Search for 'Kbuild' or 'Makefile' in the parent
+			# directories (may not be a direct parent)
+			if [[ -f ${srctree}/${dir}/Kbuild ]]; then
+				kbuild_file=${srctree}/${dir}/Kbuild
+				break
+			fi
+			if [[ -f ${srctree}/${dir}/Makefile ]]; then
+				kbuild_file=${srctree}/${dir}/Makefile
+				break
+			fi
+
+			if [[ ${dir} == . ]]; then
+				break
+			fi
+		done
+
+		if [[ -n ${kbuild_file} ]]; then
+			tmp=($(__kbuild_tmp_makefile "${kbuild_file}" |
+			       SRCARCH=${srcarch} obj=${dir} src=${srctree}/${dir} \
+			       "${1}" -n -f - 2>/dev/null))
+
+			# Add $(obj)/ prefix
+			if [[ ${dir} != . ]]; then
+				tmp=("${tmp[@]/#/${dir}\/}")
+			fi
+
+			keywords+=("${tmp[@]}")
+		fi
+
+		# *_defconfig and *.config files. These might be grouped into
+		# subdirectories, e.g., arch/powerpc/configs/*/*_defconfig.
+		if [[ ${cur} == */* ]]; then
+			dir=${cur%/*}
+		else
+			dir=.
+		fi
+
+		tmp=($(find "${srctree}/arch/${srcarch}/configs/${dir}" \
+		       "${srctree}/kernel/configs/${dir}" \
+		       -mindepth 1 -maxdepth 1 -type d -printf '%P/\n' \
+		       -o -printf '%P\n' 2>/dev/null))
+
+		if [[ ${dir} != . ]]; then
+			tmp=("${tmp[@]/#/${dir}\/}")
+		fi
+
+		keywords+=("${tmp[@]}")
+	fi
+
+	# shellcheck disable=SC2191 # '=' is appended for variables
+	keywords+=(
+		#
+		# variables (append =)
+		#
+		ARCH=
+		CROSS_COMPILE=
+		LLVM=
+		C= M= MO= O= V= W=
+		INSTALL{,_MOD,_HDR,_DTBS}_PATH=
+		KERNELRELEASE=
+
+		#
+		# targets
+		#
+		all help
+		clean mrproper distclean
+		clang-{tidy,analyzer} compile_commands.json
+		coccicheck
+		dtbs{,_check,_install} dt_binding_{check,schemas}
+		headers{,_install}
+		vmlinux install
+		modules{,_prepare,_install,_sign}
+		vdso_install
+		tags TAGS cscope gtags
+		rust{available,fmt,fmtcheck}
+		kernel{version,release} image_name
+		kselftest{,-all,-install,-clean,-merge}
+
+		# configuration
+		{,old,olddef,sync,def,savedef,rand,listnew,helpnew,test,tiny}config
+		{,build_}{menu,n,g,x}config
+		local{mod,yes}config
+		all{no,yes,mod,def}config
+		{yes2mod,mod2yes,mod2no}config
+
+		# docs
+		{html,textinfo,info,latex,pdf,epub,xml,linkcheck,refcheck,clean}docs
+
+		# package
+		{,bin,src}{rpm,deb}-pkg
+		{pacman,dir,tar}-pkg
+		tar{,gz,bz2,xz,zst}-pkg
+		perf-tar{,gz,bz2,xz,zst}-src-pkg
+	)
+
+	COMPREPLY=($(compgen -W "${keywords[*]}" -- "${cur}"))
+
+	# Do not append a space for variables, subdirs, "KBUILD_", "KCONFIG_".
+	if [[ ${COMPREPLY-} == *[=/] || ${COMPREPLY-} =~ ^(KBUILD|KCONFIG)_$ ]]; then
+		compopt -o nospace
+	fi
+
+} && complete -F _make_for_kbuild make