iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 82 insertions, 0 deletions

diff --git a/scripts/Makefile.vmlinux_a b/scripts/Makefile.vmlinux_a
new file mode 100644
index 000000000..395e29998
--- /dev/null
+++ b/scripts/Makefile.vmlinux_a
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+PHONY := __default
+__default: vmlinux.a
+
+include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include
+include $(srctree)/scripts/Makefile.lib
+
+# Link of built-in-fixup.a
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ar_builtin_fixup = AR      $@
+      cmd_ar_builtin_fixup = \
+	rm -f $@; \
+	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
+	$(AR) mPi $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
+
+targets += built-in-fixup.a
+built-in-fixup.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
+	$(call if_changed,ar_builtin_fixup)
+
+ifdef CONFIG_LTO_CLANG_THIN_DIST
+
+quiet_cmd_builtin.order = GEN     $@
+      cmd_builtin.order = $(AR) t $< > $@
+
+targets += builtin.order
+builtin.order: built-in-fixup.a FORCE
+	$(call if_changed,builtin.order)
+
+quiet_cmd_ld_thinlto_index = LD      $@
+      cmd_ld_thinlto_index = \
+	$(LD) $(KBUILD_LDFLAGS) -r --thinlto-index-only=$@ @$<
+
+targets += vmlinux.thinlto-index
+vmlinux.thinlto-index: builtin.order FORCE
+	$(call if_changed,ld_thinlto_index)
+
+quiet_cmd_ar_vmlinux.a = GEN     $@
+      cmd_ar_vmlinux.a =					\
+	rm -f $@;						\
+	while read -r obj; do					\
+		if grep -Fqx $${obj} $(word 2, $^); then	\
+			echo $${obj%.o}.thinlto-native.o;	\
+		else						\
+			echo $${obj};				\
+		fi;						\
+	done < $< | xargs $(AR) cDPrS --thin $@
+
+targets += vmlinux.a
+vmlinux.a: builtin.order vmlinux.thinlto-index FORCE
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.thinlto
+	$(call if_changed,ar_vmlinux.a)
+
+else
+
+# vmlinux.a
+# ---------------------------------------------------------------------------
+
+targets += vmlinux.a
+vmlinux.a: built-in-fixup.a FORCE
+	$(call if_changed,copy)
+
+endif
+
+# Add FORCE to the prerequisites of a target to force it to be always rebuilt.
+# ---------------------------------------------------------------------------
+
+PHONY += FORCE
+FORCE:
+
+# Read all saved command lines and dependencies for the $(targets) we
+# may be building above, using $(if_changed{,_dep}). As an
+# optimization, we don't need to read them if the target does not
+# exist, we will rebuild anyway in that case.
+
+existing-targets := $(wildcard $(sort $(targets)))
+
+-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
+
+.PHONY: $(PHONY)