ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 175 insertions, 0 deletions

diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux
new file mode 100644
index 000000000..fcae1e432
--- /dev/null
+++ b/scripts/Makefile.vmlinux
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+PHONY := __default
+__default: vmlinux
+
+include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include
+include $(srctree)/scripts/Makefile.lib
+
+targets :=
+
+%.o: %.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+%.o: %.S FORCE
+	$(call if_changed_rule,as_o_S)
+
+# Built-in dtb
+# ---------------------------------------------------------------------------
+
+quiet_cmd_wrap_dtbs = WRAP    $@
+      cmd_wrap_dtbs = {							\
+	echo '\#include <asm-generic/vmlinux.lds.h>';			\
+	echo '.section .dtb.init.rodata,"a"';				\
+	while read dtb; do						\
+		symbase=__dtb_$$(basename -s .dtb "$${dtb}" | tr - _);	\
+		echo '.balign STRUCT_ALIGNMENT';			\
+		echo ".global $${symbase}_begin";			\
+		echo "$${symbase}_begin:";				\
+		echo '.incbin "'$$dtb'" ';				\
+		echo ".global $${symbase}_end";				\
+		echo "$${symbase}_end:";				\
+	done < $<;							\
+	} > $@
+
+.builtin-dtbs.S: .builtin-dtbs-list FORCE
+	$(call if_changed,wrap_dtbs)
+
+quiet_cmd_gen_dtbs_list = GEN     $@
+      cmd_gen_dtbs_list = \
+	$(if $(CONFIG_BUILTIN_DTB_NAME), echo "arch/$(SRCARCH)/boot/dts/$(CONFIG_BUILTIN_DTB_NAME).dtb",:) > $@
+
+.builtin-dtbs-list: arch/$(SRCARCH)/boot/dts/dtbs-list FORCE
+	$(call if_changed,$(if $(CONFIG_BUILTIN_DTB_ALL),copy,gen_dtbs_list))
+
+targets += .builtin-dtbs-list
+
+ifdef CONFIG_GENERIC_BUILTIN_DTB
+targets += .builtin-dtbs.S .builtin-dtbs.o
+vmlinux.unstripped: .builtin-dtbs.o
+endif
+
+# vmlinux.unstripped
+# ---------------------------------------------------------------------------
+
+ifdef CONFIG_ARCH_WANTS_PRE_LINK_VMLINUX
+vmlinux.unstripped: arch/$(SRCARCH)/tools/vmlinux.arch.o
+
+arch/$(SRCARCH)/tools/vmlinux.arch.o: vmlinux.o FORCE
+	$(Q)$(MAKE) $(build)=arch/$(SRCARCH)/tools $@
+endif
+
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
+
+# Final link of vmlinux with optional arch pass after final link
+cmd_link_vmlinux =							\
+	$< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)" "$@";	\
+	$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+
+targets += vmlinux.unstripped .vmlinux.export.o
+vmlinux.unstripped: scripts/link-vmlinux.sh vmlinux.o .vmlinux.export.o $(KBUILD_LDS) FORCE
+	+$(call if_changed_dep,link_vmlinux)
+ifdef CONFIG_DEBUG_INFO_BTF
+vmlinux.unstripped: $(RESOLVE_BTFIDS) $(srctree)/scripts/gen-btf.sh
+endif
+
+ifdef CONFIG_BUILDTIME_TABLE_SORT
+vmlinux.unstripped: scripts/sorttable
+endif
+
+# vmlinux
+# ---------------------------------------------------------------------------
+
+remove-section-y                                   := .modinfo
+remove-section-$(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS) += '.rel*' '!.rel*.dyn'
+# for compatibility with binutils < 2.32
+# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c12d9fa2afe7abcbe407a00e15719e1a1350c2a7
+remove-section-$(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS) += '.rel.*'
+
+remove-symbols := -w --strip-unneeded-symbol='__mod_device_table__*'
+
+# To avoid warnings: "empty loadable segment detected at ..." from GNU objcopy,
+# it is necessary to remove the PT_LOAD flag from the segment.
+quiet_cmd_strip_relocs = OBJCOPY $@
+      cmd_strip_relocs = $(OBJCOPY) $(patsubst %,--set-section-flags %=noload,$(remove-section-y)) $< $@; \
+                         $(OBJCOPY) $(addprefix --remove-section=,$(remove-section-y)) $(remove-symbols) $@
+
+targets += vmlinux
+vmlinux: vmlinux.unstripped FORCE
+	$(call if_changed,strip_relocs)
+
+# modules.builtin.modinfo
+# ---------------------------------------------------------------------------
+
+# .modinfo in vmlinux.unstripped is aligned to 8 bytes for compatibility with
+# tools that expect vmlinux to have sufficiently aligned sections but the
+# additional bytes used for padding .modinfo to satisfy this requirement break
+# certain versions of kmod with
+#
+#   depmod: ERROR: kmod_builtin_iter_next: unexpected string without modname prefix
+#
+# Strip the trailing padding bytes after extracting .modinfo to comply with
+# what kmod expects to parse.
+quiet_cmd_modules_builtin_modinfo = GEN     $@
+      cmd_modules_builtin_modinfo = $(cmd_objcopy); \
+                                    sed -i 's/\x00\+$$/\x00/g' $@; \
+                                    chmod -x $@
+
+OBJCOPYFLAGS_modules.builtin.modinfo := -j .modinfo -O binary
+
+targets += modules.builtin.modinfo
+modules.builtin.modinfo: vmlinux.unstripped FORCE
+	$(call if_changed,modules_builtin_modinfo)
+
+# modules.builtin
+# ---------------------------------------------------------------------------
+
+__default: modules.builtin
+
+# The second line aids cases where multiple modules share the same object.
+
+quiet_cmd_modules_builtin = GEN     $@
+      cmd_modules_builtin = \
+	tr '\0' '\n' < $< | \
+	sed -n 's/^[[:alnum:]:_]*\.file=//p' | \
+	tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$$/.ko/' > $@
+
+targets += modules.builtin
+modules.builtin: modules.builtin.modinfo FORCE
+	$(call if_changed,modules_builtin)
+
+# modules.builtin.ranges
+# ---------------------------------------------------------------------------
+ifdef CONFIG_BUILTIN_MODULE_RANGES
+__default: modules.builtin.ranges
+
+quiet_cmd_modules_builtin_ranges = GEN     $@
+      cmd_modules_builtin_ranges = gawk -f $(real-prereqs) > $@
+
+targets += modules.builtin.ranges
+modules.builtin.ranges: $(srctree)/scripts/generate_builtin_ranges.awk \
+			modules.builtin vmlinux.map vmlinux.o.map FORCE
+	$(call if_changed,modules_builtin_ranges)
+
+vmlinux.map: vmlinux.unstripped
+	@:
+
+endif
+
+# Add FORCE to the prerequisites of a target to force it to be always rebuilt.
+# ---------------------------------------------------------------------------
+
+PHONY += FORCE
+FORCE:
+
+# Read all saved command lines and dependencies for the $(targets) we
+# may be building above, using $(if_changed{,_dep}). As an
+# optimization, we don't need to read them if the target does not
+# exist, we will rebuild anyway in that case.
+
+existing-targets := $(wildcard $(sort $(targets)))
+
+-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
+
+.PHONY: $(PHONY)