drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 175 insertions, 0 deletions

diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux
new file mode 100644
index 000000000..fcae1e432
--- /dev/null
+++ b/scripts/Makefile.vmlinux
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+PHONY := __default
+__default: vmlinux
+
+include include/config/auto.conf
+include $(srctree)/scripts/Kbuild.include
+include $(srctree)/scripts/Makefile.lib
+
+targets :=
+
+%.o: %.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+%.o: %.S FORCE
+	$(call if_changed_rule,as_o_S)
+
+# Built-in dtb
+# ---------------------------------------------------------------------------
+
+quiet_cmd_wrap_dtbs = WRAP    $@
+      cmd_wrap_dtbs = {							\
+	echo '\#include <asm-generic/vmlinux.lds.h>';			\
+	echo '.section .dtb.init.rodata,"a"';				\
+	while read dtb; do						\
+		symbase=__dtb_$$(basename -s .dtb "$${dtb}" | tr - _);	\
+		echo '.balign STRUCT_ALIGNMENT';			\
+		echo ".global $${symbase}_begin";			\
+		echo "$${symbase}_begin:";				\
+		echo '.incbin "'$$dtb'" ';				\
+		echo ".global $${symbase}_end";				\
+		echo "$${symbase}_end:";				\
+	done < $<;							\
+	} > $@
+
+.builtin-dtbs.S: .builtin-dtbs-list FORCE
+	$(call if_changed,wrap_dtbs)
+
+quiet_cmd_gen_dtbs_list = GEN     $@
+      cmd_gen_dtbs_list = \
+	$(if $(CONFIG_BUILTIN_DTB_NAME), echo "arch/$(SRCARCH)/boot/dts/$(CONFIG_BUILTIN_DTB_NAME).dtb",:) > $@
+
+.builtin-dtbs-list: arch/$(SRCARCH)/boot/dts/dtbs-list FORCE
+	$(call if_changed,$(if $(CONFIG_BUILTIN_DTB_ALL),copy,gen_dtbs_list))
+
+targets += .builtin-dtbs-list
+
+ifdef CONFIG_GENERIC_BUILTIN_DTB
+targets += .builtin-dtbs.S .builtin-dtbs.o
+vmlinux.unstripped: .builtin-dtbs.o
+endif
+
+# vmlinux.unstripped
+# ---------------------------------------------------------------------------
+
+ifdef CONFIG_ARCH_WANTS_PRE_LINK_VMLINUX
+vmlinux.unstripped: arch/$(SRCARCH)/tools/vmlinux.arch.o
+
+arch/$(SRCARCH)/tools/vmlinux.arch.o: vmlinux.o FORCE
+	$(Q)$(MAKE) $(build)=arch/$(SRCARCH)/tools $@
+endif
+
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
+
+# Final link of vmlinux with optional arch pass after final link
+cmd_link_vmlinux =							\
+	$< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)" "$@";	\
+	$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
+
+targets += vmlinux.unstripped .vmlinux.export.o
+vmlinux.unstripped: scripts/link-vmlinux.sh vmlinux.o .vmlinux.export.o $(KBUILD_LDS) FORCE
+	+$(call if_changed_dep,link_vmlinux)
+ifdef CONFIG_DEBUG_INFO_BTF
+vmlinux.unstripped: $(RESOLVE_BTFIDS) $(srctree)/scripts/gen-btf.sh
+endif
+
+ifdef CONFIG_BUILDTIME_TABLE_SORT
+vmlinux.unstripped: scripts/sorttable
+endif
+
+# vmlinux
+# ---------------------------------------------------------------------------
+
+remove-section-y                                   := .modinfo
+remove-section-$(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS) += '.rel*' '!.rel*.dyn'
+# for compatibility with binutils < 2.32
+# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c12d9fa2afe7abcbe407a00e15719e1a1350c2a7
+remove-section-$(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS) += '.rel.*'
+
+remove-symbols := -w --strip-unneeded-symbol='__mod_device_table__*'
+
+# To avoid warnings: "empty loadable segment detected at ..." from GNU objcopy,
+# it is necessary to remove the PT_LOAD flag from the segment.
+quiet_cmd_strip_relocs = OBJCOPY $@
+      cmd_strip_relocs = $(OBJCOPY) $(patsubst %,--set-section-flags %=noload,$(remove-section-y)) $< $@; \
+                         $(OBJCOPY) $(addprefix --remove-section=,$(remove-section-y)) $(remove-symbols) $@
+
+targets += vmlinux
+vmlinux: vmlinux.unstripped FORCE
+	$(call if_changed,strip_relocs)
+
+# modules.builtin.modinfo
+# ---------------------------------------------------------------------------
+
+# .modinfo in vmlinux.unstripped is aligned to 8 bytes for compatibility with
+# tools that expect vmlinux to have sufficiently aligned sections but the
+# additional bytes used for padding .modinfo to satisfy this requirement break
+# certain versions of kmod with
+#
+#   depmod: ERROR: kmod_builtin_iter_next: unexpected string without modname prefix
+#
+# Strip the trailing padding bytes after extracting .modinfo to comply with
+# what kmod expects to parse.
+quiet_cmd_modules_builtin_modinfo = GEN     $@
+      cmd_modules_builtin_modinfo = $(cmd_objcopy); \
+                                    sed -i 's/\x00\+$$/\x00/g' $@; \
+                                    chmod -x $@
+
+OBJCOPYFLAGS_modules.builtin.modinfo := -j .modinfo -O binary
+
+targets += modules.builtin.modinfo
+modules.builtin.modinfo: vmlinux.unstripped FORCE
+	$(call if_changed,modules_builtin_modinfo)
+
+# modules.builtin
+# ---------------------------------------------------------------------------
+
+__default: modules.builtin
+
+# The second line aids cases where multiple modules share the same object.
+
+quiet_cmd_modules_builtin = GEN     $@
+      cmd_modules_builtin = \
+	tr '\0' '\n' < $< | \
+	sed -n 's/^[[:alnum:]:_]*\.file=//p' | \
+	tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$$/.ko/' > $@
+
+targets += modules.builtin
+modules.builtin: modules.builtin.modinfo FORCE
+	$(call if_changed,modules_builtin)
+
+# modules.builtin.ranges
+# ---------------------------------------------------------------------------
+ifdef CONFIG_BUILTIN_MODULE_RANGES
+__default: modules.builtin.ranges
+
+quiet_cmd_modules_builtin_ranges = GEN     $@
+      cmd_modules_builtin_ranges = gawk -f $(real-prereqs) > $@
+
+targets += modules.builtin.ranges
+modules.builtin.ranges: $(srctree)/scripts/generate_builtin_ranges.awk \
+			modules.builtin vmlinux.map vmlinux.o.map FORCE
+	$(call if_changed,modules_builtin_ranges)
+
+vmlinux.map: vmlinux.unstripped
+	@:
+
+endif
+
+# Add FORCE to the prerequisites of a target to force it to be always rebuilt.
+# ---------------------------------------------------------------------------
+
+PHONY += FORCE
+FORCE:
+
+# Read all saved command lines and dependencies for the $(targets) we
+# may be building above, using $(if_changed{,_dep}). As an
+# optimization, we don't need to read them if the target does not
+# exist, we will rebuild anyway in that case.
+
+existing-targets := $(wildcard $(sort $(targets)))
+
+-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
+
+.PHONY: $(PHONY)