iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 106 insertions, 0 deletions

diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
new file mode 100644
index 000000000..91504e812
--- /dev/null
+++ b/scripts/Makefile.kasan
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+
+ifdef CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX
+# Safe for compiler to generate meminstrinsic calls in uninstrumented files.
+CFLAGS_KASAN_NOSANITIZE :=
+else
+# Don't let compiler generate memintrinsic calls in uninstrumented files
+# because they are instrumented.
+CFLAGS_KASAN_NOSANITIZE := -fno-builtin
+endif
+
+KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
+
+cc-param = $(call cc-option, -mllvm -$(1), $(call cc-option, --param $(1)))
+rustc-param = $(call rustc-option, -Cllvm-args=-$(1),)
+
+check-args = $(foreach arg,$(2),$(call $(1),$(arg)))
+
+kasan_params :=
+
+ifdef CONFIG_KASAN_STACK
+	stack_enable := 1
+else
+	stack_enable := 0
+endif
+
+ifdef CONFIG_KASAN_GENERIC
+
+ifdef CONFIG_KASAN_INLINE
+	# When the number of memory accesses in a function is less than this
+	# call threshold number, the compiler will use inline instrumentation.
+	# 10000 is chosen offhand as a sufficiently large number to make all
+	# kernel functions to be instrumented inline.
+	call_threshold := 10000
+else
+	call_threshold := 0
+endif
+
+# First, enable -fsanitize=kernel-address together with providing the shadow
+# mapping offset, as for GCC, -fasan-shadow-offset fails without -fsanitize
+# (GCC accepts the shadow mapping offset via -fasan-shadow-offset instead of
+# a --param like the other KASAN parameters).
+# Instead of ifdef-checking the compiler, rely on cc-option.
+CFLAGS_KASAN := $(call cc-option, -fsanitize=kernel-address \
+		-fasan-shadow-offset=$(KASAN_SHADOW_OFFSET), \
+		$(call cc-option, -fsanitize=kernel-address \
+		-mllvm -asan-mapping-offset=$(KASAN_SHADOW_OFFSET)))
+
+# The minimum supported `rustc` version has a minimum supported LLVM
+# version late enough that we can assume support for -asan-mapping-offset.
+RUSTFLAGS_KASAN := -Zsanitizer=kernel-address \
+		   -Zsanitizer-recover=kernel-address \
+		   -Cllvm-args=-asan-mapping-offset=$(KASAN_SHADOW_OFFSET)
+
+# Now, add other parameters enabled similarly in GCC, Clang, and rustc.
+# As some of them are not supported by older compilers, these will be filtered
+# through `cc-param` or `rust-param` as applicable.
+kasan_params += asan-instrumentation-with-call-threshold=$(call_threshold) \
+		asan-stack=$(stack_enable) \
+		asan-instrument-allocas=1 \
+		asan-globals=1
+
+# Instrument memcpy/memset/memmove calls by using instrumented __asan_mem*()
+# instead. With compilers that don't support this option, compiler-inserted
+# memintrinsics won't be checked by KASAN on GENERIC_ENTRY architectures.
+kasan_params += asan-kernel-mem-intrinsic-prefix=1
+
+endif # CONFIG_KASAN_GENERIC
+
+ifdef CONFIG_KASAN_SW_TAGS
+
+CFLAGS_KASAN := -fsanitize=kernel-hwaddress
+
+RUSTFLAGS_KASAN := -Zsanitizer=kernel-hwaddress \
+		   -Zsanitizer-recover=kernel-hwaddress
+
+ifdef CONFIG_KASAN_INLINE
+	kasan_params += hwasan-mapping-offset=$(KASAN_SHADOW_OFFSET)
+else
+	kasan_params += hwasan-instrument-with-calls=1
+endif
+
+kasan_params += hwasan-instrument-stack=$(stack_enable) \
+		hwasan-use-short-granules=0 \
+		hwasan-inline-all-checks=0
+
+# Instrument memcpy/memset/memmove calls by using instrumented __(hw)asan_mem*().
+ifdef CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX
+	ifdef CONFIG_CC_IS_GCC
+		kasan_params += asan-kernel-mem-intrinsic-prefix=1
+	else
+		kasan_params += hwasan-kernel-mem-intrinsic-prefix=1
+	endif
+endif # CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX
+
+endif # CONFIG_KASAN_SW_TAGS
+
+# Add all as-supported KASAN LLVM parameters requested by the configuration.
+CFLAGS_KASAN += $(call check-args, cc-param, $(kasan_params))
+
+ifdef CONFIG_RUST
+	# Avoid calling `rustc-param` unless Rust is enabled.
+	RUSTFLAGS_KASAN += $(call check-args, rustc-param, $(kasan_params))
+endif # CONFIG_RUST
+
+export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE RUSTFLAGS_KASAN