drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 153 insertions, 0 deletions

diff --git a/scripts/Makefile.dtbs b/scripts/Makefile.dtbs
new file mode 100644
index 000000000..c4e466390
--- /dev/null
+++ b/scripts/Makefile.dtbs
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+all-dtb := $(dtb-y) $(dtb-)
+
+# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
+dtb-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
+
+# Composite DTB (i.e. DTB constructed by overlay)
+multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs)
+# Primitive DTB compiled from *.dts
+real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs)
+# Base DTB that overlay is applied onto
+base-dtb-y := $(filter %.dtb, $(call real-search, $(multi-dtb-y), .dtb, -dtbs))
+
+# Ensure that any .dtbo is applied to at least one base .dtb. Otherwise, it
+# does not get validated.
+applied-dtbo := $(filter %.dtbo, \
+	$(call real-search, $(call multi-search, $(all-dtb), .dtb, -dtbs), .dtb, -dtbs))
+unapplied-dtbo := $(filter-out $(applied-dtbo),$(filter %.dtbo, $(dtb-y)))
+$(if $(unapplied-dtbo), $(warning .dtbo is not applied to any base: $(unapplied-dtbo)))
+
+dtb-y           := $(addprefix $(obj)/, $(dtb-y))
+multi-dtb-y     := $(addprefix $(obj)/, $(multi-dtb-y))
+real-dtb-y      := $(addprefix $(obj)/, $(real-dtb-y))
+
+always-y        += $(dtb-y)
+targets         += $(real-dtb-y)
+
+# dtbs-list
+# ---------------------------------------------------------------------------
+
+ifdef need-dtbslist
+subdir-dtbslist := $(addsuffix /dtbs-list, $(subdir-ym))
+dtb-y           += $(subdir-dtbslist)
+always-y        += $(obj)/dtbs-list
+endif
+
+$(subdir-dtbslist): $(obj)/%/dtbs-list: $(obj)/% ;
+
+$(obj)/dtbs-list: $(dtb-y) FORCE
+	$(call if_changed,gen_order)
+
+# Assembly file to wrap dtb(o)
+# ---------------------------------------------------------------------------
+
+builtin-dtb-section = $(if $(filter arch/$(SRCARCH)/boot/dts%, $(obj)),.dtb.init.rodata,.rodata)
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_wrap_S_dtb = WRAP    $@
+      cmd_wrap_S_dtb = {								\
+		symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*));	\
+		echo '\#include <asm-generic/vmlinux.lds.h>';				\
+		echo '.section $(builtin-dtb-section),"a"';				\
+		echo '.balign STRUCT_ALIGNMENT';					\
+		echo ".global $${symbase}_begin";					\
+		echo "$${symbase}_begin:";						\
+		echo '.incbin "$<" ';							\
+		echo ".global $${symbase}_end";						\
+		echo "$${symbase}_end:";						\
+		echo '.balign STRUCT_ALIGNMENT';					\
+	} > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
+	$(call if_changed,wrap_S_dtb)
+
+$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE
+	$(call if_changed,wrap_S_dtb)
+
+# Schema check
+# ---------------------------------------------------------------------------
+
+ifneq ($(CHECK_DTBS),)
+DT_CHECKER ?= dt-validate
+DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m)
+DT_BINDING_DIR := Documentation/devicetree/bindings
+DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json
+dtb-check-enabled = $(if $(filter %.dtb, $@),y)
+endif
+
+quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C],   )
+cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true)
+
+# Overlay
+# ---------------------------------------------------------------------------
+
+# NOTE:
+# Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single
+# DTB is turned into a multi-blob DTB, $^ will contain header file dependencies
+# recorded in the .*.cmd file.
+quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@
+      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check)
+
+$(multi-dtb-y): $(DT_TMP_SCHEMA) FORCE
+	$(call if_changed,fdtoverlay)
+$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs)
+
+# DTC
+# ---------------------------------------------------------------------------
+
+DTC ?= $(objtree)/scripts/dtc/dtc
+DTC_FLAGS += -Wno-unique_unit_address
+
+# Disable noisy checks by default
+ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),)
+DTC_FLAGS += -Wno-unit_address_vs_reg \
+             -Wno-avoid_unnecessary_addr_size \
+             -Wno-alias_paths \
+             -Wno-interrupt_map \
+             -Wno-simple_bus_reg
+else
+DTC_FLAGS += -Wunique_unit_address_if_enabled
+endif
+
+ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
+DTC_FLAGS += -Wnode_name_chars_strict \
+             -Wproperty_name_chars_strict \
+             -Wunique_unit_address
+endif
+
+DTC_FLAGS += $(DTC_FLAGS_$(target-stem))
+
+# Set -@ if the target is a base DTB that overlay is applied onto
+DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@)
+
+DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
+
+dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc -I $(DTC_INCLUDE) -undef -D__DTS__
+
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@
+      cmd_dtc = \
+	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+	$(DTC) -o $@ -b 0 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) \
+	       $(DTC_FLAGS) -d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \
+	$(cmd_dtb_check)
+
+$(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
+	$(call if_changed_dep,dtc)
+
+$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
+	$(call if_changed_dep,dtc)
+
+# targets
+# ---------------------------------------------------------------------------
+
+targets += $(always-y)
+
+# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
+# %.dtbo.o <- %.dtbo.S <- %.dtbo <- %.dtso
+targets += $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
+           $(call intermediate_targets, .dtbo.o, .dtbo.S .dtbo)