iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 78 insertions, 0 deletions

diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
new file mode 100644
index 000000000..fc10671c2
--- /dev/null
+++ b/scripts/Kconfig.include
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Kconfig helper macros
+
+# Convenient variables
+comma       := ,
+quote       := "
+squote      := '
+empty       :=
+space       := $(empty) $(empty)
+dollar      := $
+right_paren := )
+left_paren  := (
+
+# $(if-success,<command>,<then>,<else>)
+# Return <then> if <command> exits with 0, <else> otherwise.
+if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
+
+# $(success,<command>)
+# Return y if <command> exits with 0, n otherwise
+success = $(if-success,$(1),y,n)
+
+# $(failure,<command>)
+# Return n if <command> exits with 0, y otherwise
+failure = $(if-success,$(1),n,y)
+
+# $(cc-option,<flag>)
+# Return y if the compiler supports <flag>, n otherwise
+cc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(CC) -Werror $(CLANG_FLAGS) $(1) -c -x c /dev/null -o .tmp_$$/tmp.o)
+
+# $(ld-option,<flag>)
+# Return y if the linker supports <flag>, n otherwise
+ld-option = $(success,$(LD) -v $(1))
+
+# $(as-instr,<instr>)
+# Return y if the assembler supports <instr>, n otherwise
+as-instr = $(success,printf "%b\n" "$(1)" | $(CC) $(CLANG_FLAGS) $(2) -Wa$(comma)--fatal-warnings -c -x assembler-with-cpp -o /dev/null -)
+as-instr64 = $(as-instr,$(1),$(m64-flag))
+
+# check if $(CC) and $(LD) exist
+$(error-if,$(failure,command -v $(CC)),C compiler '$(CC)' not found)
+$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
+
+# Get the C compiler name, version, and error out if it is not supported.
+cc-info := $(shell,$(srctree)/scripts/cc-version.sh $(CC))
+$(error-if,$(success,test -z "$(cc-info)"),Sorry$(comma) this C compiler is not supported.)
+cc-name := $(shell,set -- $(cc-info) && echo $1)
+cc-version := $(shell,set -- $(cc-info) && echo $2)
+
+# Get the assembler name, version, and error out if it is not supported.
+as-info := $(shell,$(srctree)/scripts/as-version.sh $(CC) $(CLANG_FLAGS))
+$(error-if,$(success,test -z "$(as-info)"),Sorry$(comma) this assembler is not supported.)
+as-name := $(shell,set -- $(as-info) && echo $1)
+as-version := $(shell,set -- $(as-info) && echo $2)
+
+# Get the linker name, version, and error out if it is not supported.
+ld-info := $(shell,$(srctree)/scripts/ld-version.sh $(LD))
+$(error-if,$(success,test -z "$(ld-info)"),Sorry$(comma) this linker is not supported.)
+ld-name := $(shell,set -- $(ld-info) && echo $1)
+ld-version := $(shell,set -- $(ld-info) && echo $2)
+
+# machine bit flags
+#  $(m32-flag): -m32 if the compiler supports it, or an empty string otherwise.
+#  $(m64-flag): -m64 if the compiler supports it, or an empty string otherwise.
+cc-option-bit = $(if-success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null,$(1))
+m32-flag := $(cc-option-bit,-m32)
+m64-flag := $(cc-option-bit,-m64)
+
+# Test whether the compiler can link userspace applications
+cc_can_link_user = $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(1))
+
+rustc-version := $(shell,$(srctree)/scripts/rustc-version.sh $(RUSTC))
+rustc-llvm-version := $(shell,$(srctree)/scripts/rustc-llvm-version.sh $(RUSTC))
+
+# $(rustc-option,<flag>)
+# Return y if the Rust compiler supports <flag>, n otherwise
+# If you are testing for unstable features, consider testing RUSTC_VERSION
+# instead, as features may have different completeness while available.
+rustc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(RUSTC) $(1) --crate-type=rlib /dev/null --out-dir=.tmp_$$ -o .tmp_$$/tmp.rlib)