Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 78 insertions, 0 deletions

diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
new file mode 100644
index 000000000..fc10671c2
--- /dev/null
+++ b/scripts/Kconfig.include
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Kconfig helper macros
+
+# Convenient variables
+comma       := ,
+quote       := "
+squote      := '
+empty       :=
+space       := $(empty) $(empty)
+dollar      := $
+right_paren := )
+left_paren  := (
+
+# $(if-success,<command>,<then>,<else>)
+# Return <then> if <command> exits with 0, <else> otherwise.
+if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
+
+# $(success,<command>)
+# Return y if <command> exits with 0, n otherwise
+success = $(if-success,$(1),y,n)
+
+# $(failure,<command>)
+# Return n if <command> exits with 0, y otherwise
+failure = $(if-success,$(1),n,y)
+
+# $(cc-option,<flag>)
+# Return y if the compiler supports <flag>, n otherwise
+cc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(CC) -Werror $(CLANG_FLAGS) $(1) -c -x c /dev/null -o .tmp_$$/tmp.o)
+
+# $(ld-option,<flag>)
+# Return y if the linker supports <flag>, n otherwise
+ld-option = $(success,$(LD) -v $(1))
+
+# $(as-instr,<instr>)
+# Return y if the assembler supports <instr>, n otherwise
+as-instr = $(success,printf "%b\n" "$(1)" | $(CC) $(CLANG_FLAGS) $(2) -Wa$(comma)--fatal-warnings -c -x assembler-with-cpp -o /dev/null -)
+as-instr64 = $(as-instr,$(1),$(m64-flag))
+
+# check if $(CC) and $(LD) exist
+$(error-if,$(failure,command -v $(CC)),C compiler '$(CC)' not found)
+$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
+
+# Get the C compiler name, version, and error out if it is not supported.
+cc-info := $(shell,$(srctree)/scripts/cc-version.sh $(CC))
+$(error-if,$(success,test -z "$(cc-info)"),Sorry$(comma) this C compiler is not supported.)
+cc-name := $(shell,set -- $(cc-info) && echo $1)
+cc-version := $(shell,set -- $(cc-info) && echo $2)
+
+# Get the assembler name, version, and error out if it is not supported.
+as-info := $(shell,$(srctree)/scripts/as-version.sh $(CC) $(CLANG_FLAGS))
+$(error-if,$(success,test -z "$(as-info)"),Sorry$(comma) this assembler is not supported.)
+as-name := $(shell,set -- $(as-info) && echo $1)
+as-version := $(shell,set -- $(as-info) && echo $2)
+
+# Get the linker name, version, and error out if it is not supported.
+ld-info := $(shell,$(srctree)/scripts/ld-version.sh $(LD))
+$(error-if,$(success,test -z "$(ld-info)"),Sorry$(comma) this linker is not supported.)
+ld-name := $(shell,set -- $(ld-info) && echo $1)
+ld-version := $(shell,set -- $(ld-info) && echo $2)
+
+# machine bit flags
+#  $(m32-flag): -m32 if the compiler supports it, or an empty string otherwise.
+#  $(m64-flag): -m64 if the compiler supports it, or an empty string otherwise.
+cc-option-bit = $(if-success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null,$(1))
+m32-flag := $(cc-option-bit,-m32)
+m64-flag := $(cc-option-bit,-m64)
+
+# Test whether the compiler can link userspace applications
+cc_can_link_user = $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(1))
+
+rustc-version := $(shell,$(srctree)/scripts/rustc-version.sh $(RUSTC))
+rustc-llvm-version := $(shell,$(srctree)/scripts/rustc-llvm-version.sh $(RUSTC))
+
+# $(rustc-option,<flag>)
+# Return y if the Rust compiler supports <flag>, n otherwise
+# If you are testing for unstable features, consider testing RUSTC_VERSION
+# instead, as features may have different completeness while available.
+rustc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(RUSTC) $(1) --crate-type=rlib /dev/null --out-dir=.tmp_$$ -o .tmp_$$/tmp.rlib)