virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 78 insertions, 0 deletions

diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
new file mode 100644
index 000000000..fc10671c2
--- /dev/null
+++ b/scripts/Kconfig.include
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Kconfig helper macros
+
+# Convenient variables
+comma       := ,
+quote       := "
+squote      := '
+empty       :=
+space       := $(empty) $(empty)
+dollar      := $
+right_paren := )
+left_paren  := (
+
+# $(if-success,<command>,<then>,<else>)
+# Return <then> if <command> exits with 0, <else> otherwise.
+if-success = $(shell,{ $(1); } >/dev/null 2>&1 && echo "$(2)" || echo "$(3)")
+
+# $(success,<command>)
+# Return y if <command> exits with 0, n otherwise
+success = $(if-success,$(1),y,n)
+
+# $(failure,<command>)
+# Return n if <command> exits with 0, y otherwise
+failure = $(if-success,$(1),n,y)
+
+# $(cc-option,<flag>)
+# Return y if the compiler supports <flag>, n otherwise
+cc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(CC) -Werror $(CLANG_FLAGS) $(1) -c -x c /dev/null -o .tmp_$$/tmp.o)
+
+# $(ld-option,<flag>)
+# Return y if the linker supports <flag>, n otherwise
+ld-option = $(success,$(LD) -v $(1))
+
+# $(as-instr,<instr>)
+# Return y if the assembler supports <instr>, n otherwise
+as-instr = $(success,printf "%b\n" "$(1)" | $(CC) $(CLANG_FLAGS) $(2) -Wa$(comma)--fatal-warnings -c -x assembler-with-cpp -o /dev/null -)
+as-instr64 = $(as-instr,$(1),$(m64-flag))
+
+# check if $(CC) and $(LD) exist
+$(error-if,$(failure,command -v $(CC)),C compiler '$(CC)' not found)
+$(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
+
+# Get the C compiler name, version, and error out if it is not supported.
+cc-info := $(shell,$(srctree)/scripts/cc-version.sh $(CC))
+$(error-if,$(success,test -z "$(cc-info)"),Sorry$(comma) this C compiler is not supported.)
+cc-name := $(shell,set -- $(cc-info) && echo $1)
+cc-version := $(shell,set -- $(cc-info) && echo $2)
+
+# Get the assembler name, version, and error out if it is not supported.
+as-info := $(shell,$(srctree)/scripts/as-version.sh $(CC) $(CLANG_FLAGS))
+$(error-if,$(success,test -z "$(as-info)"),Sorry$(comma) this assembler is not supported.)
+as-name := $(shell,set -- $(as-info) && echo $1)
+as-version := $(shell,set -- $(as-info) && echo $2)
+
+# Get the linker name, version, and error out if it is not supported.
+ld-info := $(shell,$(srctree)/scripts/ld-version.sh $(LD))
+$(error-if,$(success,test -z "$(ld-info)"),Sorry$(comma) this linker is not supported.)
+ld-name := $(shell,set -- $(ld-info) && echo $1)
+ld-version := $(shell,set -- $(ld-info) && echo $2)
+
+# machine bit flags
+#  $(m32-flag): -m32 if the compiler supports it, or an empty string otherwise.
+#  $(m64-flag): -m64 if the compiler supports it, or an empty string otherwise.
+cc-option-bit = $(if-success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null,$(1))
+m32-flag := $(cc-option-bit,-m32)
+m64-flag := $(cc-option-bit,-m64)
+
+# Test whether the compiler can link userspace applications
+cc_can_link_user = $(success,$(srctree)/scripts/cc-can-link.sh $(CC) $(CLANG_FLAGS) $(USERCFLAGS) $(USERLDFLAGS) $(1))
+
+rustc-version := $(shell,$(srctree)/scripts/rustc-version.sh $(RUSTC))
+rustc-llvm-version := $(shell,$(srctree)/scripts/rustc-llvm-version.sh $(RUSTC))
+
+# $(rustc-option,<flag>)
+# Return y if the Rust compiler supports <flag>, n otherwise
+# If you are testing for unstable features, consider testing RUSTC_VERSION
+# instead, as features may have different completeness while available.
+rustc-option = $(success,trap "rm -rf .tmp_$$" EXIT; mkdir .tmp_$$; $(RUSTC) $(1) --crate-type=rlib /dev/null --out-dir=.tmp_$$ -o .tmp_$$/tmp.rlib)