Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 100 insertions, 0 deletions

diff --git a/samples/vfio-mdev/README.rst b/samples/vfio-mdev/README.rst
new file mode 100644
index 000000000..b52eb3773
--- /dev/null
+++ b/samples/vfio-mdev/README.rst
@@ -0,0 +1,100 @@
+Using the mtty vfio-mdev sample code
+====================================
+
+mtty is a sample vfio-mdev driver that demonstrates how to use the mediated
+device framework.
+
+The sample driver creates an mdev device that simulates a serial port over a PCI
+card.
+
+1. Build and load the mtty.ko module.
+
+   This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
+
+   Files in this device directory in sysfs are similar to the following::
+
+     # tree /sys/devices/virtual/mtty/mtty/
+        /sys/devices/virtual/mtty/mtty/
+        |-- mdev_supported_types
+        |   |-- mtty-1
+        |   |   |-- available_instances
+        |   |   |-- create
+        |   |   |-- device_api
+        |   |   |-- devices
+        |   |   `-- name
+        |   `-- mtty-2
+        |       |-- available_instances
+        |       |-- create
+        |       |-- device_api
+        |       |-- devices
+        |       `-- name
+        |-- mtty_dev
+        |   `-- sample_mtty_dev
+        |-- power
+        |   |-- autosuspend_delay_ms
+        |   |-- control
+        |   |-- runtime_active_time
+        |   |-- runtime_status
+        |   `-- runtime_suspended_time
+        |-- subsystem -> ../../../../class/mtty
+        `-- uevent
+
+2. Create a mediated device by using the dummy device that you created in the
+   previous step::
+
+     # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
+              /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
+
+3. Add parameters to qemu-kvm::
+
+     -device vfio-pci,\
+      sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
+
+4. Boot the VM.
+
+   In the Linux guest VM, with no hardware on the host, the device appears
+   as  follows::
+
+     # lspci -s 00:05.0 -xxvv
+     00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
+             Subsystem: Device 4348:3253
+             Physical Slot: 5
+             Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
+     Stepping- SERR- FastB2B- DisINTx-
+             Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
+     <TAbort- <MAbort- >SERR- <PERR- INTx-
+             Interrupt: pin A routed to IRQ 10
+             Region 0: I/O ports at c150 [size=8]
+             Region 1: I/O ports at c158 [size=8]
+             Kernel driver in use: serial
+     00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
+     10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
+     20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
+     30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
+
+     In the Linux guest VM, dmesg output for the device is as follows:
+
+     serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
+     0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
+     0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
+
+
+5. In the Linux guest VM, check the serial ports::
+
+     # setserial -g /dev/ttyS*
+     /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
+     /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
+     /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
+
+6. Using minicom or any terminal emulation program, open port /dev/ttyS1 or
+   /dev/ttyS2 with hardware flow control disabled.
+
+7. Type data on the minicom terminal or send data to the terminal emulation
+   program and read the data.
+
+   Data is loop backed from hosts mtty driver.
+
+8. Destroy the mediated device that you created::
+
+     # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
+