x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 100 insertions, 0 deletions

diff --git a/samples/vfio-mdev/README.rst b/samples/vfio-mdev/README.rst
new file mode 100644
index 000000000..b52eb3773
--- /dev/null
+++ b/samples/vfio-mdev/README.rst
@@ -0,0 +1,100 @@
+Using the mtty vfio-mdev sample code
+====================================
+
+mtty is a sample vfio-mdev driver that demonstrates how to use the mediated
+device framework.
+
+The sample driver creates an mdev device that simulates a serial port over a PCI
+card.
+
+1. Build and load the mtty.ko module.
+
+   This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
+
+   Files in this device directory in sysfs are similar to the following::
+
+     # tree /sys/devices/virtual/mtty/mtty/
+        /sys/devices/virtual/mtty/mtty/
+        |-- mdev_supported_types
+        |   |-- mtty-1
+        |   |   |-- available_instances
+        |   |   |-- create
+        |   |   |-- device_api
+        |   |   |-- devices
+        |   |   `-- name
+        |   `-- mtty-2
+        |       |-- available_instances
+        |       |-- create
+        |       |-- device_api
+        |       |-- devices
+        |       `-- name
+        |-- mtty_dev
+        |   `-- sample_mtty_dev
+        |-- power
+        |   |-- autosuspend_delay_ms
+        |   |-- control
+        |   |-- runtime_active_time
+        |   |-- runtime_status
+        |   `-- runtime_suspended_time
+        |-- subsystem -> ../../../../class/mtty
+        `-- uevent
+
+2. Create a mediated device by using the dummy device that you created in the
+   previous step::
+
+     # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
+              /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
+
+3. Add parameters to qemu-kvm::
+
+     -device vfio-pci,\
+      sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
+
+4. Boot the VM.
+
+   In the Linux guest VM, with no hardware on the host, the device appears
+   as  follows::
+
+     # lspci -s 00:05.0 -xxvv
+     00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
+             Subsystem: Device 4348:3253
+             Physical Slot: 5
+             Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
+     Stepping- SERR- FastB2B- DisINTx-
+             Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
+     <TAbort- <MAbort- >SERR- <PERR- INTx-
+             Interrupt: pin A routed to IRQ 10
+             Region 0: I/O ports at c150 [size=8]
+             Region 1: I/O ports at c158 [size=8]
+             Kernel driver in use: serial
+     00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
+     10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
+     20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
+     30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
+
+     In the Linux guest VM, dmesg output for the device is as follows:
+
+     serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
+     0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
+     0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
+
+
+5. In the Linux guest VM, check the serial ports::
+
+     # setserial -g /dev/ttyS*
+     /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
+     /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
+     /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
+
+6. Using minicom or any terminal emulation program, open port /dev/ttyS1 or
+   /dev/ttyS2 with hardware flow control disabled.
+
+7. Type data on the minicom terminal or send data to the terminal emulation
+   program and read the data.
+
+   Data is loop backed from hosts mtty driver.
+
+8. Destroy the mediated device that you created::
+
+     # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
+