Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 193 insertions, 0 deletions

diff --git a/samples/rust/Kconfig b/samples/rust/Kconfig
new file mode 100644
index 000000000..31d62533e
--- /dev/null
+++ b/samples/rust/Kconfig
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig SAMPLES_RUST
+	bool "Rust samples"
+	depends on RUST
+	help
+	  You can build sample Rust kernel code here.
+
+	  If unsure, say N.
+
+if SAMPLES_RUST
+
+config SAMPLE_RUST_CONFIGFS
+	tristate "Configfs sample"
+	depends on CONFIGFS_FS
+	help
+	  This option builds the Rust configfs sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_configfs.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_MINIMAL
+	tristate "Minimal"
+	help
+	  This option builds the Rust minimal module sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_minimal.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_MISC_DEVICE
+	tristate "Misc device"
+	help
+	  This option builds the Rust misc device.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_misc_device.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_PRINT
+	tristate "Printing macros"
+	help
+	  This option builds the Rust printing macros sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_print.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DMA
+	tristate "DMA Test Driver"
+	depends on PCI
+	help
+	  This option builds the Rust DMA Test driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_dma.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DEBUGFS
+	tristate "DebugFS Test Module"
+	depends on DEBUG_FS
+	help
+	  This option builds the Rust DebugFS Test module sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_debugfs.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DEBUGFS_SCOPED
+	tristate "Scoped DebugFS Test Module"
+	depends on DEBUG_FS
+	help
+	  This option builds the Rust Scoped DebugFS Test module sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_debugfs_scoped.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_I2C
+	tristate "I2C Driver"
+	depends on I2C=y
+	help
+	  This option builds the Rust I2C driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_i2c.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_I2C_CLIENT
+	tristate "I2C Client Registration"
+	depends on I2C=y
+	help
+	  This option builds the Rust I2C client manual creation
+	  sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_i2c_client.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_PCI
+	tristate "PCI Driver"
+	depends on PCI
+	help
+	  This option builds the Rust PCI driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_pci.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_PLATFORM
+	tristate "Platform Driver"
+	help
+	  This option builds the Rust Platform driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_platform.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_USB
+	tristate "USB Driver"
+	depends on USB = y
+	help
+	  This option builds the Rust USB driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_usb.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_FAUX
+	tristate "Faux Driver"
+	help
+	  This option builds the Rust Faux driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_faux.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_AUXILIARY
+	tristate "Auxiliary Driver"
+	depends on PCI
+	select AUXILIARY_BUS
+	help
+	  This option builds the Rust auxiliary driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_auxiliary.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_DRIVER_SERDEV
+	tristate "Serial Device Bus Device Driver"
+	select RUST_SERIAL_DEV_BUS_ABSTRACTIONS
+	help
+	  This option builds the Rust serial device bus driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_driver_serdev.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_SOC
+	tristate "SoC Driver"
+	select SOC_BUS
+	help
+	  This option builds the Rust SoC driver sample.
+
+	  To compile this as a module, choose M here:
+	  the module will be called rust_soc.
+
+	  If unsure, say N.
+
+config SAMPLE_RUST_HOSTPROGS
+	bool "Host programs"
+	help
+	  This option builds the Rust host program samples.
+
+	  If unsure, say N.
+
+endif # SAMPLES_RUST