Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 75 insertions, 0 deletions

diff --git a/samples/hid/Makefile.target b/samples/hid/Makefile.target
new file mode 100644
index 000000000..7621f55e2
--- /dev/null
+++ b/samples/hid/Makefile.target
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+# ==========================================================================
+# Building binaries on the host system
+# Binaries are not used during the compilation of the kernel, and intended
+# to be build for target board, target board can be host of course. Added to
+# build binaries to run not on host system.
+#
+# Sample syntax
+# tprogs-y := xsk_example
+# Will compile xsk_example.c and create an executable named xsk_example
+#
+# tprogs-y    := xdpsock
+# xdpsock-objs := xdpsock_1.o xdpsock_2.o
+# Will compile xdpsock_1.c and xdpsock_2.c, and then link the executable
+# xdpsock, based on xdpsock_1.o and xdpsock_2.o
+#
+# Derived from scripts/Makefile.host
+#
+__tprogs := $(sort $(tprogs-y))
+
+# C code
+# Executables compiled from a single .c file
+tprog-csingle	:= $(foreach m,$(__tprogs), \
+			$(if $($(m)-objs),,$(m)))
+
+# C executables linked based on several .o files
+tprog-cmulti	:= $(foreach m,$(__tprogs),\
+			$(if $($(m)-objs),$(m)))
+
+# Object (.o) files compiled from .c files
+tprog-cobjs	:= $(sort $(foreach m,$(__tprogs),$($(m)-objs)))
+
+tprog-csingle	:= $(addprefix $(obj)/,$(tprog-csingle))
+tprog-cmulti	:= $(addprefix $(obj)/,$(tprog-cmulti))
+tprog-cobjs	:= $(addprefix $(obj)/,$(tprog-cobjs))
+
+#####
+# Handle options to gcc. Support building with separate output directory
+
+_tprogc_flags   = $(TPROGS_CFLAGS) \
+                 $(TPROGCFLAGS_$(basetarget).o)
+
+# $(objtree)/$(obj) for including generated headers from checkin source files
+ifeq ($(KBUILD_EXTMOD),)
+ifdef building_out_of_srctree
+_tprogc_flags   += -I $(objtree)/$(obj)
+endif
+endif
+
+tprogc_flags    = -Wp,-MD,$(depfile) $(_tprogc_flags)
+
+# Create executable from a single .c file
+# tprog-csingle -> Executable
+quiet_cmd_tprog-csingle 	= CC  $@
+      cmd_tprog-csingle	= $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ $< \
+		$(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
+$(tprog-csingle): $(obj)/%: $(src)/%.c FORCE
+	$(call if_changed_dep,tprog-csingle)
+
+# Link an executable based on list of .o files, all plain c
+# tprog-cmulti -> executable
+quiet_cmd_tprog-cmulti	= LD  $@
+      cmd_tprog-cmulti	= $(CC) $(tprogc_flags) $(TPROGS_LDFLAGS) -o $@ \
+			  $(addprefix $(obj)/,$($(@F)-objs)) \
+			  $(TPROGS_LDLIBS) $(TPROGLDLIBS_$(@F))
+$(tprog-cmulti): $(tprog-cobjs) FORCE
+	$(call if_changed,tprog-cmulti)
+$(call multi_depend, $(tprog-cmulti), , -objs)
+
+# Create .o file from a single .c file
+# tprog-cobjs -> .o
+quiet_cmd_tprog-cobjs	= CC  $@
+      cmd_tprog-cobjs	= $(CC) $(tprogc_flags) -c -o $@ $<
+$(tprog-cobjs): $(obj)/%.o: $(src)/%.c FORCE
+	$(call if_changed_dep,tprog-cobjs)