Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 98 insertions, 0 deletions

diff --git a/samples/bpf/tracex5_user.c b/samples/bpf/tracex5_user.c
new file mode 100644
index 000000000..7e2d8397f
--- /dev/null
+++ b/samples/bpf/tracex5_user.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <linux/filter.h>
+#include <linux/seccomp.h>
+#include <sys/prctl.h>
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+#include "trace_helpers.h"
+#include "bpf_util.h"
+
+#ifdef __mips__
+#define	MAX_ENTRIES  6000 /* MIPS n64 syscalls start at 5000 */
+#else
+#define	MAX_ENTRIES  1024
+#endif
+
+/* install fake seccomp program to enable seccomp code path inside the kernel,
+ * so that our kprobe attached to seccomp_phase1() can be triggered
+ */
+static void install_accept_all_seccomp(void)
+{
+	struct sock_filter filter[] = {
+		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),
+	};
+	struct sock_fprog prog = {
+		.len = (unsigned short)ARRAY_SIZE(filter),
+		.filter = filter,
+	};
+	if (prctl(PR_SET_SECCOMP, 2, &prog))
+		perror("prctl");
+}
+
+int main(int ac, char **argv)
+{
+	struct bpf_link *link = NULL;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int key, fd, progs_fd;
+	const char *section;
+	char filename[256];
+	FILE *f;
+
+	snprintf(filename, sizeof(filename), "%s.bpf.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	prog = bpf_object__find_program_by_name(obj, "bpf_prog1");
+	if (!prog) {
+		printf("finding a prog in obj file failed\n");
+		goto cleanup;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	link = bpf_program__attach(prog);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+		link = NULL;
+		goto cleanup;
+	}
+
+	progs_fd = bpf_object__find_map_fd_by_name(obj, "progs");
+	if (progs_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		section = bpf_program__section_name(prog);
+		/* register only syscalls to PROG_ARRAY */
+		if (sscanf(section, "kprobe/%d", &key) != 1)
+			continue;
+
+		fd = bpf_program__fd(prog);
+		bpf_map_update_elem(progs_fd, &key, &fd, BPF_ANY);
+	}
+
+	install_accept_all_seccomp();
+
+	f = popen("dd if=/dev/zero of=/dev/null count=5", "r");
+	(void) f;
+
+	read_trace_pipe();
+
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
+	return 0;
+}