Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 130 insertions, 0 deletions

diff --git a/samples/bpf/lathist_user.c b/samples/bpf/lathist_user.c
new file mode 100644
index 000000000..7d8ff2418
--- /dev/null
+++ b/samples/bpf/lathist_user.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2013-2015 PLUMgrid, http://plumgrid.com
+ * Copyright (c) 2015 BMW Car IT GmbH
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <bpf/libbpf.h>
+#include <bpf/bpf.h>
+
+#define MAX_ENTRIES	20
+#define MAX_CPU		4
+#define MAX_STARS	40
+
+struct cpu_hist {
+	long data[MAX_ENTRIES];
+	long max;
+};
+
+static struct cpu_hist cpu_hist[MAX_CPU];
+
+static void stars(char *str, long val, long max, int width)
+{
+	int i;
+
+	for (i = 0; i < (width * val / max) - 1 && i < width - 1; i++)
+		str[i] = '*';
+	if (val > max)
+		str[i - 1] = '+';
+	str[i] = '\0';
+}
+
+static void print_hist(void)
+{
+	char starstr[MAX_STARS];
+	struct cpu_hist *hist;
+	int i, j;
+
+	/* clear screen */
+	printf("\033[2J");
+
+	for (j = 0; j < MAX_CPU; j++) {
+		hist = &cpu_hist[j];
+
+		/* ignore CPUs without data (maybe offline?) */
+		if (hist->max == 0)
+			continue;
+
+		printf("CPU %d\n", j);
+		printf("      latency        : count     distribution\n");
+		for (i = 1; i <= MAX_ENTRIES; i++) {
+			stars(starstr, hist->data[i - 1], hist->max, MAX_STARS);
+			printf("%8ld -> %-8ld : %-8ld |%-*s|\n",
+				(1l << i) >> 1, (1l << i) - 1,
+				hist->data[i - 1], MAX_STARS, starstr);
+		}
+	}
+}
+
+static void get_data(int fd)
+{
+	long key, value;
+	int c, i;
+
+	for (i = 0; i < MAX_CPU; i++)
+		cpu_hist[i].max = 0;
+
+	for (c = 0; c < MAX_CPU; c++) {
+		for (i = 0; i < MAX_ENTRIES; i++) {
+			key = c * MAX_ENTRIES + i;
+			bpf_map_lookup_elem(fd, &key, &value);
+
+			cpu_hist[c].data[i] = value;
+			if (value > cpu_hist[c].max)
+				cpu_hist[c].max = value;
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	struct bpf_link *links[2];
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char filename[256];
+	int map_fd, i = 0;
+
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	map_fd = bpf_object__find_map_fd_by_name(obj, "my_lat");
+	if (map_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		links[i] = bpf_program__attach(prog);
+		if (libbpf_get_error(links[i])) {
+			fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+			links[i] = NULL;
+			goto cleanup;
+		}
+		i++;
+	}
+
+	while (1) {
+		get_data(map_fd);
+		print_hist();
+		sleep(5);
+	}
+
+cleanup:
+	for (i--; i >= 0; i--)
+		bpf_link__destroy(links[i]);
+
+	bpf_object__close(obj);
+	return 0;
+}