Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 515 insertions, 0 deletions

diff --git a/samples/bpf/hbm.c b/samples/bpf/hbm.c
new file mode 100644
index 000000000..fc88d4dbd
--- /dev/null
+++ b/samples/bpf/hbm.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * Example program for Host Bandwidth Management
+ *
+ * This program loads a cgroup skb BPF program to enforce cgroup output
+ * (egress) or input (ingress) bandwidth limits.
+ *
+ * USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>] [-w] [-h] [prog]
+ *   Where:
+ *    -d	Print BPF trace debug buffer
+ *    -l	Also limit flows doing loopback
+ *    -n <#>	To create cgroup \"/hbm#\" and attach prog
+ *		Default is /hbm1
+ *    --no_cn   Do not return cn notifications
+ *    -r <rate>	Rate limit in Mbps
+ *    -s	Get HBM stats (marked, dropped, etc.)
+ *    -t <time>	Exit after specified seconds (default is 0)
+ *    -w	Work conserving flag. cgroup can increase its bandwidth
+ *		beyond the rate limit specified while there is available
+ *		bandwidth. Current implementation assumes there is only
+ *		NIC (eth0), but can be extended to support multiple NICs.
+ *		Currently only supported for egress.
+ *    -h	Print this info
+ *    prog	BPF program file name. Name defaults to hbm_out_kern.o
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <sys/time.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/unistd.h>
+#include <linux/compiler.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+#include <getopt.h>
+
+#include "cgroup_helpers.h"
+#include "hbm.h"
+#include "bpf_util.h"
+#include <bpf/libbpf.h>
+
+bool outFlag = true;
+int minRate = 1000;		/* cgroup rate limit in Mbps */
+int rate = 1000;		/* can grow if rate conserving is enabled */
+int dur = 1;
+bool stats_flag;
+bool loopback_flag;
+bool debugFlag;
+bool work_conserving_flag;
+bool no_cn_flag;
+bool edt_flag;
+
+static void Usage(void);
+static void read_trace_pipe2(void);
+static void do_error(char *msg, bool errno_flag);
+
+#define TRACEFS "/sys/kernel/tracing/"
+
+static struct bpf_program *bpf_prog;
+static struct bpf_object *obj;
+static int queue_stats_fd;
+
+static void read_trace_pipe2(void)
+{
+	int trace_fd;
+	FILE *outf;
+	char *outFname = "hbm_out.log";
+
+	trace_fd = open(TRACEFS "trace_pipe", O_RDONLY, 0);
+	if (trace_fd < 0) {
+		printf("Error opening trace_pipe\n");
+		return;
+	}
+
+//	Future support of ingress
+//	if (!outFlag)
+//		outFname = "hbm_in.log";
+	outf = fopen(outFname, "w");
+
+	if (outf == NULL)
+		printf("Error creating %s\n", outFname);
+
+	while (1) {
+		static char buf[4097];
+		ssize_t sz;
+
+		sz = read(trace_fd, buf, sizeof(buf) - 1);
+		if (sz > 0) {
+			buf[sz] = 0;
+			puts(buf);
+			if (outf != NULL) {
+				fprintf(outf, "%s\n", buf);
+				fflush(outf);
+			}
+		}
+	}
+}
+
+static void do_error(char *msg, bool errno_flag)
+{
+	if (errno_flag)
+		printf("ERROR: %s, errno: %d\n", msg, errno);
+	else
+		printf("ERROR: %s\n", msg);
+	exit(1);
+}
+
+static int prog_load(char *prog)
+{
+	struct bpf_program *pos;
+	const char *sec_name;
+
+	obj = bpf_object__open_file(prog, NULL);
+	if (libbpf_get_error(obj)) {
+		printf("ERROR: opening BPF object file failed\n");
+		return 1;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		printf("ERROR: loading BPF object file failed\n");
+		goto err;
+	}
+
+	bpf_object__for_each_program(pos, obj) {
+		sec_name = bpf_program__section_name(pos);
+		if (sec_name && !strcmp(sec_name, "cgroup_skb/egress")) {
+			bpf_prog = pos;
+			break;
+		}
+	}
+	if (!bpf_prog) {
+		printf("ERROR: finding a prog in obj file failed\n");
+		goto err;
+	}
+
+	queue_stats_fd = bpf_object__find_map_fd_by_name(obj, "queue_stats");
+	if (queue_stats_fd < 0) {
+		printf("ERROR: finding a map in obj file failed\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	bpf_object__close(obj);
+	return 1;
+}
+
+static int run_bpf_prog(char *prog, int cg_id)
+{
+	struct hbm_queue_stats qstats = {0};
+	char cg_dir[100], cg_pin_path[100];
+	struct bpf_link *link = NULL;
+	int key = 0;
+	int cg1 = 0;
+	int rc = 0;
+
+	sprintf(cg_dir, "/hbm%d", cg_id);
+	rc = prog_load(prog);
+	if (rc != 0)
+		return rc;
+
+	if (setup_cgroup_environment()) {
+		printf("ERROR: setting cgroup environment\n");
+		goto err;
+	}
+	cg1 = create_and_get_cgroup(cg_dir);
+	if (!cg1) {
+		printf("ERROR: create_and_get_cgroup\n");
+		goto err;
+	}
+	if (join_cgroup(cg_dir)) {
+		printf("ERROR: join_cgroup\n");
+		goto err;
+	}
+
+	qstats.rate = rate;
+	qstats.stats = stats_flag ? 1 : 0;
+	qstats.loopback = loopback_flag ? 1 : 0;
+	qstats.no_cn = no_cn_flag ? 1 : 0;
+	if (bpf_map_update_elem(queue_stats_fd, &key, &qstats, BPF_ANY)) {
+		printf("ERROR: Could not update map element\n");
+		goto err;
+	}
+
+	if (!outFlag)
+		bpf_program__set_expected_attach_type(bpf_prog, BPF_CGROUP_INET_INGRESS);
+
+	link = bpf_program__attach_cgroup(bpf_prog, cg1);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach_cgroup failed\n");
+		goto err;
+	}
+
+	sprintf(cg_pin_path, "/sys/fs/bpf/hbm%d", cg_id);
+	rc = bpf_link__pin(link, cg_pin_path);
+	if (rc < 0) {
+		printf("ERROR: bpf_link__pin failed: %d\n", rc);
+		goto err;
+	}
+
+	if (work_conserving_flag) {
+		struct timeval t0, t_last, t_new;
+		FILE *fin;
+		unsigned long long last_eth_tx_bytes, new_eth_tx_bytes;
+		signed long long last_cg_tx_bytes, new_cg_tx_bytes;
+		signed long long delta_time, delta_bytes, delta_rate;
+		int delta_ms;
+#define DELTA_RATE_CHECK 10000		/* in us */
+#define RATE_THRESHOLD 9500000000	/* 9.5 Gbps */
+
+		bpf_map_lookup_elem(queue_stats_fd, &key, &qstats);
+		if (gettimeofday(&t0, NULL) < 0)
+			do_error("gettimeofday failed", true);
+		t_last = t0;
+		fin = fopen("/sys/class/net/eth0/statistics/tx_bytes", "r");
+		if (fscanf(fin, "%llu", &last_eth_tx_bytes) != 1)
+			do_error("fscanf fails", false);
+		fclose(fin);
+		last_cg_tx_bytes = qstats.bytes_total;
+		while (true) {
+			usleep(DELTA_RATE_CHECK);
+			if (gettimeofday(&t_new, NULL) < 0)
+				do_error("gettimeofday failed", true);
+			delta_ms = (t_new.tv_sec - t0.tv_sec) * 1000 +
+				(t_new.tv_usec - t0.tv_usec)/1000;
+			if (delta_ms > dur * 1000)
+				break;
+			delta_time = (t_new.tv_sec - t_last.tv_sec) * 1000000 +
+				(t_new.tv_usec - t_last.tv_usec);
+			if (delta_time == 0)
+				continue;
+			t_last = t_new;
+			fin = fopen("/sys/class/net/eth0/statistics/tx_bytes",
+				    "r");
+			if (fscanf(fin, "%llu", &new_eth_tx_bytes) != 1)
+				do_error("fscanf fails", false);
+			fclose(fin);
+			printf("  new_eth_tx_bytes:%llu\n",
+			       new_eth_tx_bytes);
+			bpf_map_lookup_elem(queue_stats_fd, &key, &qstats);
+			new_cg_tx_bytes = qstats.bytes_total;
+			delta_bytes = new_eth_tx_bytes - last_eth_tx_bytes;
+			last_eth_tx_bytes = new_eth_tx_bytes;
+			delta_rate = (delta_bytes * 8000000) / delta_time;
+			printf("%5d - eth_rate:%.1fGbps cg_rate:%.3fGbps",
+			       delta_ms, delta_rate/1000000000.0,
+			       rate/1000.0);
+			if (delta_rate < RATE_THRESHOLD) {
+				/* can increase cgroup rate limit, but first
+				 * check if we are using the current limit.
+				 * Currently increasing by 6.25%, unknown
+				 * if that is the optimal rate.
+				 */
+				int rate_diff100;
+
+				delta_bytes = new_cg_tx_bytes -
+					last_cg_tx_bytes;
+				last_cg_tx_bytes = new_cg_tx_bytes;
+				delta_rate = (delta_bytes * 8000000) /
+					delta_time;
+				printf(" rate:%.3fGbps",
+				       delta_rate/1000000000.0);
+				rate_diff100 = (((long long)rate)*1000000 -
+						     delta_rate) * 100 /
+					(((long long) rate) * 1000000);
+				printf("  rdiff:%d", rate_diff100);
+				if (rate_diff100  <= 3) {
+					rate += (rate >> 4);
+					if (rate > RATE_THRESHOLD / 1000000)
+						rate = RATE_THRESHOLD / 1000000;
+					qstats.rate = rate;
+					printf(" INC\n");
+				} else {
+					printf("\n");
+				}
+			} else {
+				/* Need to decrease cgroup rate limit.
+				 * Currently decreasing by 12.5%, unknown
+				 * if that is optimal
+				 */
+				printf(" DEC\n");
+				rate -= (rate >> 3);
+				if (rate < minRate)
+					rate = minRate;
+				qstats.rate = rate;
+			}
+			if (bpf_map_update_elem(queue_stats_fd, &key, &qstats, BPF_ANY))
+				do_error("update map element fails", false);
+		}
+	} else {
+		sleep(dur);
+	}
+	// Get stats!
+	if (stats_flag && bpf_map_lookup_elem(queue_stats_fd, &key, &qstats)) {
+		char fname[100];
+		FILE *fout;
+
+		if (!outFlag)
+			sprintf(fname, "hbm.%d.in", cg_id);
+		else
+			sprintf(fname, "hbm.%d.out", cg_id);
+		fout = fopen(fname, "w");
+		fprintf(fout, "id:%d\n", cg_id);
+		fprintf(fout, "ERROR: Could not lookup queue_stats\n");
+		fclose(fout);
+	} else if (stats_flag && qstats.lastPacketTime >
+		   qstats.firstPacketTime) {
+		long long delta_us = (qstats.lastPacketTime -
+				      qstats.firstPacketTime)/1000;
+		unsigned int rate_mbps = ((qstats.bytes_total -
+					   qstats.bytes_dropped) * 8 /
+					  delta_us);
+		double percent_pkts, percent_bytes;
+		char fname[100];
+		FILE *fout;
+		int k;
+		static const char *returnValNames[] = {
+			"DROP_PKT",
+			"ALLOW_PKT",
+			"DROP_PKT_CWR",
+			"ALLOW_PKT_CWR"
+		};
+#define RET_VAL_COUNT 4
+
+// Future support of ingress
+//		if (!outFlag)
+//			sprintf(fname, "hbm.%d.in", cg_id);
+//		else
+		sprintf(fname, "hbm.%d.out", cg_id);
+		fout = fopen(fname, "w");
+		fprintf(fout, "id:%d\n", cg_id);
+		fprintf(fout, "rate_mbps:%d\n", rate_mbps);
+		fprintf(fout, "duration:%.1f secs\n",
+			(qstats.lastPacketTime - qstats.firstPacketTime) /
+			1000000000.0);
+		fprintf(fout, "packets:%d\n", (int)qstats.pkts_total);
+		fprintf(fout, "bytes_MB:%d\n", (int)(qstats.bytes_total /
+						     1000000));
+		fprintf(fout, "pkts_dropped:%d\n", (int)qstats.pkts_dropped);
+		fprintf(fout, "bytes_dropped_MB:%d\n",
+			(int)(qstats.bytes_dropped /
+						       1000000));
+		// Marked Pkts and Bytes
+		percent_pkts = (qstats.pkts_marked * 100.0) /
+			(qstats.pkts_total + 1);
+		percent_bytes = (qstats.bytes_marked * 100.0) /
+			(qstats.bytes_total + 1);
+		fprintf(fout, "pkts_marked_percent:%6.2f\n", percent_pkts);
+		fprintf(fout, "bytes_marked_percent:%6.2f\n", percent_bytes);
+
+		// Dropped Pkts and Bytes
+		percent_pkts = (qstats.pkts_dropped * 100.0) /
+			(qstats.pkts_total + 1);
+		percent_bytes = (qstats.bytes_dropped * 100.0) /
+			(qstats.bytes_total + 1);
+		fprintf(fout, "pkts_dropped_percent:%6.2f\n", percent_pkts);
+		fprintf(fout, "bytes_dropped_percent:%6.2f\n", percent_bytes);
+
+		// ECN CE markings
+		percent_pkts = (qstats.pkts_ecn_ce * 100.0) /
+			(qstats.pkts_total + 1);
+		fprintf(fout, "pkts_ecn_ce:%6.2f (%d)\n", percent_pkts,
+			(int)qstats.pkts_ecn_ce);
+
+		// Average cwnd
+		fprintf(fout, "avg cwnd:%d\n",
+			(int)(qstats.sum_cwnd / (qstats.sum_cwnd_cnt + 1)));
+		// Average rtt
+		fprintf(fout, "avg rtt:%d\n",
+			(int)(qstats.sum_rtt / (qstats.pkts_total + 1)));
+		// Average credit
+		if (edt_flag)
+			fprintf(fout, "avg credit_ms:%.03f\n",
+				(qstats.sum_credit /
+				 (qstats.pkts_total + 1.0)) / 1000000.0);
+		else
+			fprintf(fout, "avg credit:%d\n",
+				(int)(qstats.sum_credit /
+				      (1500 * ((int)qstats.pkts_total ) + 1)));
+
+		// Return values stats
+		for (k = 0; k < RET_VAL_COUNT; k++) {
+			percent_pkts = (qstats.returnValCount[k] * 100.0) /
+				(qstats.pkts_total + 1);
+			fprintf(fout, "%s:%6.2f (%d)\n", returnValNames[k],
+				percent_pkts, (int)qstats.returnValCount[k]);
+		}
+		fclose(fout);
+	}
+
+	if (debugFlag)
+		read_trace_pipe2();
+	goto cleanup;
+
+err:
+	rc = 1;
+
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
+
+	if (cg1 != -1)
+		close(cg1);
+
+	if (rc != 0)
+		cleanup_cgroup_environment();
+	return rc;
+}
+
+static void Usage(void)
+{
+	printf("This program loads a cgroup skb BPF program to enforce\n"
+	       "cgroup output (egress) bandwidth limits.\n\n"
+	       "USAGE: hbm [-o] [-d]  [-l] [-n <id>] [--no_cn] [-r <rate>]\n"
+	       "           [-s] [-t <secs>] [-w] [-h] [prog]\n"
+	       "  Where:\n"
+	       "    -o         indicates egress direction (default)\n"
+	       "    -d         print BPF trace debug buffer\n"
+	       "    --edt      use fq's Earliest Departure Time\n"
+	       "    -l         also limit flows using loopback\n"
+	       "    -n <#>     to create cgroup \"/hbm#\" and attach prog\n"
+	       "               Default is /hbm1\n"
+	       "    --no_cn    disable CN notifications\n"
+	       "    -r <rate>  Rate in Mbps\n"
+	       "    -s         Update HBM stats\n"
+	       "    -t <time>  Exit after specified seconds (default is 0)\n"
+	       "    -w	       Work conserving flag. cgroup can increase\n"
+	       "               bandwidth beyond the rate limit specified\n"
+	       "               while there is available bandwidth. Current\n"
+	       "               implementation assumes there is only eth0\n"
+	       "               but can be extended to support multiple NICs\n"
+	       "    -h         print this info\n"
+	       "    prog       BPF program file name. Name defaults to\n"
+	       "                 hbm_out_kern.o\n");
+}
+
+int main(int argc, char **argv)
+{
+	char *prog = "hbm_out_kern.o";
+	int  k;
+	int cg_id = 1;
+	char *optstring = "iodln:r:st:wh";
+	struct option loptions[] = {
+		{"no_cn", 0, NULL, 1},
+		{"edt", 0, NULL, 2},
+		{NULL, 0, NULL, 0}
+	};
+
+	while ((k = getopt_long(argc, argv, optstring, loptions, NULL)) != -1) {
+		switch (k) {
+		case 1:
+			no_cn_flag = true;
+			break;
+		case 2:
+			prog = "hbm_edt_kern.o";
+			edt_flag = true;
+			break;
+		case'o':
+			break;
+		case 'd':
+			debugFlag = true;
+			break;
+		case 'l':
+			loopback_flag = true;
+			break;
+		case 'n':
+			cg_id = atoi(optarg);
+			break;
+		case 'r':
+			minRate = atoi(optarg) * 1.024;
+			rate = minRate;
+			break;
+		case 's':
+			stats_flag = true;
+			break;
+		case 't':
+			dur = atoi(optarg);
+			break;
+		case 'w':
+			work_conserving_flag = true;
+			break;
+		case '?':
+			if (optopt == 'n' || optopt == 'r' || optopt == 't')
+				fprintf(stderr,
+					"Option -%c requires an argument.\n\n",
+					optopt);
+		case 'h':
+		default:
+			Usage();
+			return 0;
+		}
+	}
+
+	if (optind < argc)
+		prog = argv[optind];
+	printf("HBM prog: %s\n", prog != NULL ? prog : "NULL");
+
+	/* Use libbpf 1.0 API mode */
+	libbpf_set_strict_mode(LIBBPF_STRICT_ALL);
+
+	return run_bpf_prog(prog, cg_id);
+}