Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 251 insertions, 0 deletions

diff --git a/samples/bpf/cpustat_user.c b/samples/bpf/cpustat_user.c
new file mode 100644
index 000000000..356f756cb
--- /dev/null
+++ b/samples/bpf/cpustat_user.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <sched.h>
+#include <string.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <locale.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/wait.h>
+
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+
+static int cstate_map_fd, pstate_map_fd;
+
+#define MAX_CPU			8
+#define MAX_PSTATE_ENTRIES	5
+#define MAX_CSTATE_ENTRIES	3
+#define MAX_STARS		40
+
+#define CPUFREQ_MAX_SYSFS_PATH	"/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq"
+#define CPUFREQ_LOWEST_FREQ	"208000"
+#define CPUFREQ_HIGHEST_FREQ	"12000000"
+
+struct cpu_stat_data {
+	unsigned long cstate[MAX_CSTATE_ENTRIES];
+	unsigned long pstate[MAX_PSTATE_ENTRIES];
+};
+
+static struct cpu_stat_data stat_data[MAX_CPU];
+
+static void cpu_stat_print(void)
+{
+	int i, j;
+	char state_str[sizeof("cstate-9")];
+	struct cpu_stat_data *data;
+
+	/* Clear screen */
+	printf("\033[2J");
+
+	/* Header */
+	printf("\nCPU states statistics:\n");
+	printf("%-10s ", "state(ms)");
+
+	for (i = 0; i < MAX_CSTATE_ENTRIES; i++) {
+		sprintf(state_str, "cstate-%d", i);
+		printf("%-11s ", state_str);
+	}
+
+	for (i = 0; i < MAX_PSTATE_ENTRIES; i++) {
+		sprintf(state_str, "pstate-%d", i);
+		printf("%-11s ", state_str);
+	}
+
+	printf("\n");
+
+	for (j = 0; j < MAX_CPU; j++) {
+		data = &stat_data[j];
+
+		printf("CPU-%-6d ", j);
+		for (i = 0; i < MAX_CSTATE_ENTRIES; i++)
+			printf("%-11lu ", data->cstate[i] / 1000000);
+
+		for (i = 0; i < MAX_PSTATE_ENTRIES; i++)
+			printf("%-11lu ", data->pstate[i] / 1000000);
+
+		printf("\n");
+	}
+}
+
+static void cpu_stat_update(int cstate_fd, int pstate_fd)
+{
+	unsigned long key, value;
+	int c, i;
+
+	for (c = 0; c < MAX_CPU; c++) {
+		for (i = 0; i < MAX_CSTATE_ENTRIES; i++) {
+			key = c * MAX_CSTATE_ENTRIES + i;
+			bpf_map_lookup_elem(cstate_fd, &key, &value);
+			stat_data[c].cstate[i] = value;
+		}
+
+		for (i = 0; i < MAX_PSTATE_ENTRIES; i++) {
+			key = c * MAX_PSTATE_ENTRIES + i;
+			bpf_map_lookup_elem(pstate_fd, &key, &value);
+			stat_data[c].pstate[i] = value;
+		}
+	}
+}
+
+/*
+ * This function is copied from 'idlestat' tool function
+ * idlestat_wake_all() in idlestate.c.
+ *
+ * It sets the self running task affinity to cpus one by one so can wake up
+ * the specific CPU to handle scheduling; this results in all cpus can be
+ * waken up once and produce ftrace event 'trace_cpu_idle'.
+ */
+static int cpu_stat_inject_cpu_idle_event(void)
+{
+	int rcpu, i, ret;
+	cpu_set_t cpumask;
+	cpu_set_t original_cpumask;
+
+	ret = sysconf(_SC_NPROCESSORS_CONF);
+	if (ret < 0)
+		return -1;
+
+	rcpu = sched_getcpu();
+	if (rcpu < 0)
+		return -1;
+
+	/* Keep track of the CPUs we will run on */
+	sched_getaffinity(0, sizeof(original_cpumask), &original_cpumask);
+
+	for (i = 0; i < ret; i++) {
+
+		/* Pointless to wake up ourself */
+		if (i == rcpu)
+			continue;
+
+		/* Pointless to wake CPUs we will not run on */
+		if (!CPU_ISSET(i, &original_cpumask))
+			continue;
+
+		CPU_ZERO(&cpumask);
+		CPU_SET(i, &cpumask);
+
+		sched_setaffinity(0, sizeof(cpumask), &cpumask);
+	}
+
+	/* Enable all the CPUs of the original mask */
+	sched_setaffinity(0, sizeof(original_cpumask), &original_cpumask);
+	return 0;
+}
+
+/*
+ * It's possible to have no any frequency change for long time and cannot
+ * get ftrace event 'trace_cpu_frequency' for long period, this introduces
+ * big deviation for pstate statistics.
+ *
+ * To solve this issue, below code forces to set 'scaling_max_freq' to 208MHz
+ * for triggering ftrace event 'trace_cpu_frequency' and then recovery back to
+ * the maximum frequency value 1.2GHz.
+ */
+static int cpu_stat_inject_cpu_frequency_event(void)
+{
+	int len, fd;
+
+	fd = open(CPUFREQ_MAX_SYSFS_PATH, O_WRONLY);
+	if (fd < 0) {
+		printf("failed to open scaling_max_freq, errno=%d\n", errno);
+		return fd;
+	}
+
+	len = write(fd, CPUFREQ_LOWEST_FREQ, strlen(CPUFREQ_LOWEST_FREQ));
+	if (len < 0) {
+		printf("failed to open scaling_max_freq, errno=%d\n", errno);
+		goto err;
+	}
+
+	len = write(fd, CPUFREQ_HIGHEST_FREQ, strlen(CPUFREQ_HIGHEST_FREQ));
+	if (len < 0) {
+		printf("failed to open scaling_max_freq, errno=%d\n", errno);
+		goto err;
+	}
+
+err:
+	close(fd);
+	return len;
+}
+
+static void int_exit(int sig)
+{
+	cpu_stat_inject_cpu_idle_event();
+	cpu_stat_inject_cpu_frequency_event();
+	cpu_stat_update(cstate_map_fd, pstate_map_fd);
+	cpu_stat_print();
+	exit(0);
+}
+
+int main(int argc, char **argv)
+{
+	struct bpf_link *link = NULL;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char filename[256];
+	int ret;
+
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	prog = bpf_object__find_program_by_name(obj, "bpf_prog1");
+	if (!prog) {
+		printf("finding a prog in obj file failed\n");
+		goto cleanup;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	cstate_map_fd = bpf_object__find_map_fd_by_name(obj, "cstate_duration");
+	pstate_map_fd = bpf_object__find_map_fd_by_name(obj, "pstate_duration");
+	if (cstate_map_fd < 0 || pstate_map_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	link = bpf_program__attach(prog);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+		link = NULL;
+		goto cleanup;
+	}
+
+	ret = cpu_stat_inject_cpu_idle_event();
+	if (ret < 0)
+		return 1;
+
+	ret = cpu_stat_inject_cpu_frequency_event();
+	if (ret < 0)
+		return 1;
+
+	signal(SIGINT, int_exit);
+	signal(SIGTERM, int_exit);
+
+	while (1) {
+		cpu_stat_update(cstate_map_fd, pstate_map_fd);
+		cpu_stat_print();
+		sleep(5);
+	}
+
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
+	return 0;
+}