Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 362 insertions, 0 deletions

diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c
new file mode 100644
index 000000000..df29048a0
--- /dev/null
+++ b/net/wireless/radiotap.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/*
+ * Radiotap parser
+ *
+ * Copyright 2007		Andy Green <andy@warmcat.com>
+ * Copyright 2009		Johannes Berg <johannes@sipsolutions.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <net/cfg80211.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/unaligned.h>
+
+/* function prototypes and related defs are in include/net/cfg80211.h */
+
+static const struct radiotap_align_size rtap_namespace_sizes[] = {
+	[IEEE80211_RADIOTAP_TSFT] = { .align = 8, .size = 8, },
+	[IEEE80211_RADIOTAP_FLAGS] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_RATE] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_CHANNEL] = { .align = 2, .size = 4, },
+	[IEEE80211_RADIOTAP_FHSS] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_DBM_ANTSIGNAL] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_DBM_ANTNOISE] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_LOCK_QUALITY] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_TX_ATTENUATION] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_DB_TX_ATTENUATION] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_DBM_TX_POWER] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_ANTENNA] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_DB_ANTSIGNAL] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_DB_ANTNOISE] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_RX_FLAGS] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_TX_FLAGS] = { .align = 2, .size = 2, },
+	[IEEE80211_RADIOTAP_RTS_RETRIES] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
+	[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
+	[IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, },
+	[IEEE80211_RADIOTAP_VHT] = { .align = 2, .size = 12, },
+	/*
+	 * add more here as they are defined in radiotap.h
+	 */
+};
+
+static const struct ieee80211_radiotap_namespace radiotap_ns = {
+	.n_bits = ARRAY_SIZE(rtap_namespace_sizes),
+	.align_size = rtap_namespace_sizes,
+};
+
+/**
+ * ieee80211_radiotap_iterator_init - radiotap parser iterator initialization
+ * @iterator: radiotap_iterator to initialize
+ * @radiotap_header: radiotap header to parse
+ * @max_length: total length we can parse into (eg, whole packet length)
+ * @vns: vendor namespaces to parse
+ *
+ * Returns: 0 or a negative error code if there is a problem.
+ *
+ * This function initializes an opaque iterator struct which can then
+ * be passed to ieee80211_radiotap_iterator_next() to visit every radiotap
+ * argument which is present in the header.  It knows about extended
+ * present headers and handles them.
+ *
+ * How to use:
+ * call __ieee80211_radiotap_iterator_init() to init a semi-opaque iterator
+ * struct ieee80211_radiotap_iterator (no need to init the struct beforehand)
+ * checking for a good 0 return code.  Then loop calling
+ * __ieee80211_radiotap_iterator_next()... it returns either 0,
+ * -ENOENT if there are no more args to parse, or -EINVAL if there is a problem.
+ * The iterator's @this_arg member points to the start of the argument
+ * associated with the current argument index that is present, which can be
+ * found in the iterator's @this_arg_index member.  This arg index corresponds
+ * to the IEEE80211_RADIOTAP_... defines.
+ *
+ * Radiotap header length:
+ * You can find the CPU-endian total radiotap header length in
+ * iterator->max_length after executing ieee80211_radiotap_iterator_init()
+ * successfully.
+ *
+ * Alignment Gotcha:
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned.  Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ *
+ * Example code:
+ * See Documentation/networking/radiotap-headers.rst
+ */
+
+int ieee80211_radiotap_iterator_init(
+	struct ieee80211_radiotap_iterator *iterator,
+	struct ieee80211_radiotap_header *radiotap_header,
+	int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns)
+{
+	/* check the radiotap header can actually be present */
+	if (max_length < sizeof(struct ieee80211_radiotap_header))
+		return -EINVAL;
+
+	/* Linux only supports version 0 radiotap format */
+	if (radiotap_header->it_version)
+		return -EINVAL;
+
+	/* sanity check for allowed length and radiotap length field */
+	if (max_length < get_unaligned_le16(&radiotap_header->it_len))
+		return -EINVAL;
+
+	iterator->_rtheader = radiotap_header;
+	iterator->_max_length = get_unaligned_le16(&radiotap_header->it_len);
+	iterator->_arg_index = 0;
+	iterator->_bitmap_shifter = get_unaligned_le32(&radiotap_header->it_present);
+	iterator->_arg = (uint8_t *)radiotap_header->it_optional;
+	iterator->_reset_on_ext = 0;
+	iterator->_next_bitmap = radiotap_header->it_optional;
+	iterator->_vns = vns;
+	iterator->current_namespace = &radiotap_ns;
+	iterator->is_radiotap_ns = 1;
+
+	/* find payload start allowing for extended bitmap(s) */
+
+	if (iterator->_bitmap_shifter & (BIT(IEEE80211_RADIOTAP_EXT))) {
+		if ((unsigned long)iterator->_arg -
+		    (unsigned long)iterator->_rtheader + sizeof(uint32_t) >
+		    (unsigned long)iterator->_max_length)
+			return -EINVAL;
+		while (get_unaligned_le32(iterator->_arg) &
+					(BIT(IEEE80211_RADIOTAP_EXT))) {
+			iterator->_arg += sizeof(uint32_t);
+
+			/*
+			 * check for insanity where the present bitmaps
+			 * keep claiming to extend up to or even beyond the
+			 * stated radiotap header length
+			 */
+
+			if ((unsigned long)iterator->_arg -
+			    (unsigned long)iterator->_rtheader +
+			    sizeof(uint32_t) >
+			    (unsigned long)iterator->_max_length)
+				return -EINVAL;
+		}
+
+		iterator->_arg += sizeof(uint32_t);
+
+		/*
+		 * no need to check again for blowing past stated radiotap
+		 * header length, because ieee80211_radiotap_iterator_next
+		 * checks it before it is dereferenced
+		 */
+	}
+
+	iterator->this_arg = iterator->_arg;
+
+	/* we are all initialized happily */
+
+	return 0;
+}
+EXPORT_SYMBOL(ieee80211_radiotap_iterator_init);
+
+static void find_ns(struct ieee80211_radiotap_iterator *iterator,
+		    uint32_t oui, uint8_t subns)
+{
+	int i;
+
+	iterator->current_namespace = NULL;
+
+	if (!iterator->_vns)
+		return;
+
+	for (i = 0; i < iterator->_vns->n_ns; i++) {
+		if (iterator->_vns->ns[i].oui != oui)
+			continue;
+		if (iterator->_vns->ns[i].subns != subns)
+			continue;
+
+		iterator->current_namespace = &iterator->_vns->ns[i];
+		break;
+	}
+}
+
+
+
+/**
+ * ieee80211_radiotap_iterator_next - return next radiotap parser iterator arg
+ * @iterator: radiotap_iterator to move to next arg (if any)
+ *
+ * Returns: 0 if there is an argument to handle,
+ * -ENOENT if there are no more args or -EINVAL
+ * if there is something else wrong.
+ *
+ * This function provides the next radiotap arg index (IEEE80211_RADIOTAP_*)
+ * in @this_arg_index and sets @this_arg to point to the
+ * payload for the field.  It takes care of alignment handling and extended
+ * present fields.  @this_arg can be changed by the caller (eg,
+ * incremented to move inside a compound argument like
+ * IEEE80211_RADIOTAP_CHANNEL).  The args pointed to are in
+ * little-endian format whatever the endianness of your CPU.
+ *
+ * Alignment Gotcha:
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned.  Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ */
+
+int ieee80211_radiotap_iterator_next(
+	struct ieee80211_radiotap_iterator *iterator)
+{
+	while (1) {
+		int hit = 0;
+		int pad, align, size, subns;
+		uint32_t oui;
+
+		/* if no more EXT bits, that's it */
+		if ((iterator->_arg_index % 32) == IEEE80211_RADIOTAP_EXT &&
+		    !(iterator->_bitmap_shifter & 1))
+			return -ENOENT;
+
+		if (!(iterator->_bitmap_shifter & 1))
+			goto next_entry; /* arg not present */
+
+		/* get alignment/size of data */
+		switch (iterator->_arg_index % 32) {
+		case IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE:
+		case IEEE80211_RADIOTAP_EXT:
+			align = 1;
+			size = 0;
+			break;
+		case IEEE80211_RADIOTAP_VENDOR_NAMESPACE:
+			align = 2;
+			size = 6;
+			break;
+		default:
+			if (!iterator->current_namespace ||
+			    iterator->_arg_index >= iterator->current_namespace->n_bits) {
+				align = 0;
+			} else {
+				align = iterator->current_namespace->align_size[iterator->_arg_index].align;
+				size = iterator->current_namespace->align_size[iterator->_arg_index].size;
+			}
+			if (!align) {
+				if (iterator->current_namespace == &radiotap_ns)
+					return -ENOENT;
+				/* skip all subsequent data */
+				iterator->_arg = iterator->_next_ns_data;
+				/* give up on this namespace */
+				iterator->current_namespace = NULL;
+				goto next_entry;
+			}
+			break;
+		}
+
+		/*
+		 * arg is present, account for alignment padding
+		 *
+		 * Note that these alignments are relative to the start
+		 * of the radiotap header.  There is no guarantee
+		 * that the radiotap header itself is aligned on any
+		 * kind of boundary.
+		 *
+		 * The above is why get_unaligned() is used to dereference
+		 * multibyte elements from the radiotap area.
+		 */
+
+		pad = ((unsigned long)iterator->_arg -
+		       (unsigned long)iterator->_rtheader) & (align - 1);
+
+		if (pad)
+			iterator->_arg += align - pad;
+
+		if (iterator->_arg_index % 32 == IEEE80211_RADIOTAP_VENDOR_NAMESPACE) {
+			int vnslen;
+
+			if ((unsigned long)iterator->_arg + size -
+			    (unsigned long)iterator->_rtheader >
+			    (unsigned long)iterator->_max_length)
+				return -EINVAL;
+
+			oui = (*iterator->_arg << 16) |
+				(*(iterator->_arg + 1) << 8) |
+				*(iterator->_arg + 2);
+			subns = *(iterator->_arg + 3);
+
+			find_ns(iterator, oui, subns);
+
+			vnslen = get_unaligned_le16(iterator->_arg + 4);
+			iterator->_next_ns_data = iterator->_arg + size + vnslen;
+			if (!iterator->current_namespace)
+				size += vnslen;
+		}
+
+		/*
+		 * this is what we will return to user, but we need to
+		 * move on first so next call has something fresh to test
+		 */
+		iterator->this_arg_index = iterator->_arg_index;
+		iterator->this_arg = iterator->_arg;
+		iterator->this_arg_size = size;
+
+		/* internally move on the size of this arg */
+		iterator->_arg += size;
+
+		/*
+		 * check for insanity where we are given a bitmap that
+		 * claims to have more arg content than the length of the
+		 * radiotap section.  We will normally end up equalling this
+		 * max_length on the last arg, never exceeding it.
+		 */
+
+		if ((unsigned long)iterator->_arg -
+		    (unsigned long)iterator->_rtheader >
+		    (unsigned long)iterator->_max_length)
+			return -EINVAL;
+
+		/* these special ones are valid in each bitmap word */
+		switch (iterator->_arg_index % 32) {
+		case IEEE80211_RADIOTAP_VENDOR_NAMESPACE:
+			iterator->_reset_on_ext = 1;
+
+			iterator->is_radiotap_ns = 0;
+			/*
+			 * If parser didn't register this vendor
+			 * namespace with us, allow it to show it
+			 * as 'raw. Do do that, set argument index
+			 * to vendor namespace.
+			 */
+			iterator->this_arg_index =
+				IEEE80211_RADIOTAP_VENDOR_NAMESPACE;
+			if (!iterator->current_namespace)
+				hit = 1;
+			goto next_entry;
+		case IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE:
+			iterator->_reset_on_ext = 1;
+			iterator->current_namespace = &radiotap_ns;
+			iterator->is_radiotap_ns = 1;
+			goto next_entry;
+		case IEEE80211_RADIOTAP_EXT:
+			/*
+			 * bit 31 was set, there is more
+			 * -- move to next u32 bitmap
+			 */
+			iterator->_bitmap_shifter =
+				get_unaligned_le32(iterator->_next_bitmap);
+			iterator->_next_bitmap++;
+			if (iterator->_reset_on_ext)
+				iterator->_arg_index = 0;
+			else
+				iterator->_arg_index++;
+			iterator->_reset_on_ext = 0;
+			break;
+		default:
+			/* we've got a hit! */
+			hit = 1;
+ next_entry:
+			iterator->_bitmap_shifter >>= 1;
+			iterator->_arg_index++;
+		}
+
+		/* if we found a valid arg earlier, return it now */
+		if (hit)
+			return 0;
+	}
+}
+EXPORT_SYMBOL(ieee80211_radiotap_iterator_next);