Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 77 insertions, 0 deletions

diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
new file mode 100644
index 000000000..e7808e571
--- /dev/null
+++ b/net/sunrpc/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SUNRPC
+	tristate
+	depends on MULTIUSER
+
+config SUNRPC_GSS
+	tristate
+	select OID_REGISTRY
+	depends on MULTIUSER
+
+config SUNRPC_BACKCHANNEL
+	bool
+	depends on SUNRPC
+
+config SUNRPC_SWAP
+	bool
+	depends on SUNRPC
+
+config RPCSEC_GSS_KRB5
+	tristate "Secure RPC: Kerberos V mechanism"
+	depends on SUNRPC && CRYPTO
+	default y
+	select SUNRPC_GSS
+	select CRYPTO_KRB5
+	help
+	  Choose Y here to enable Secure RPC using the Kerberos version 5
+	  GSS-API mechanism (RFC 1964).
+
+	  Secure RPC calls with Kerberos require an auxiliary user-space
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.  In addition, user-space
+	  Kerberos support should be installed.
+
+	  If unsure, say Y.
+
+config SUNRPC_DEBUG
+	bool "RPC: Enable dprintk debugging"
+	depends on SUNRPC && SYSCTL
+	select DEBUG_FS
+	help
+	  This option enables a sysctl-based debugging interface
+	  that is be used by the 'rpcdebug' utility to turn on or off
+	  logging of different aspects of the kernel RPC activity.
+
+	  Disabling this option will make your kernel slightly smaller,
+	  but makes troubleshooting NFS issues significantly harder.
+
+	  If unsure, say Y.
+
+config SUNRPC_DEBUG_TRACE
+	bool "RPC: Send dfprintk() output to the trace buffer"
+	depends on SUNRPC_DEBUG && TRACING
+	default n
+	help
+          dprintk() output can be voluminous, which can overwhelm the
+          kernel's logging facility as it must be sent to the console.
+          This option causes dprintk() output to go to the trace buffer
+          instead of the kernel log.
+
+          This will cause warnings about trace_printk() being used to be
+          logged at boot time, so say N unless you are debugging a problem
+          with sunrpc-based clients or services.
+
+config SUNRPC_XPRT_RDMA
+	tristate "RPC-over-RDMA transport"
+	depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS
+	default SUNRPC && INFINIBAND
+	select SG_POOL
+	help
+	  This option allows the NFS client and server to use RDMA
+	  transports (InfiniBand, iWARP, or RoCE).
+
+	  To compile this support as a module, choose M. The module
+	  will be called rpcrdma.ko.
+
+	  If unsure, or you know there is no RDMA capability on your
+	  hardware platform, say N.