Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 77 insertions, 0 deletions

diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
new file mode 100644
index 000000000..e7808e571
--- /dev/null
+++ b/net/sunrpc/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SUNRPC
+	tristate
+	depends on MULTIUSER
+
+config SUNRPC_GSS
+	tristate
+	select OID_REGISTRY
+	depends on MULTIUSER
+
+config SUNRPC_BACKCHANNEL
+	bool
+	depends on SUNRPC
+
+config SUNRPC_SWAP
+	bool
+	depends on SUNRPC
+
+config RPCSEC_GSS_KRB5
+	tristate "Secure RPC: Kerberos V mechanism"
+	depends on SUNRPC && CRYPTO
+	default y
+	select SUNRPC_GSS
+	select CRYPTO_KRB5
+	help
+	  Choose Y here to enable Secure RPC using the Kerberos version 5
+	  GSS-API mechanism (RFC 1964).
+
+	  Secure RPC calls with Kerberos require an auxiliary user-space
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.  In addition, user-space
+	  Kerberos support should be installed.
+
+	  If unsure, say Y.
+
+config SUNRPC_DEBUG
+	bool "RPC: Enable dprintk debugging"
+	depends on SUNRPC && SYSCTL
+	select DEBUG_FS
+	help
+	  This option enables a sysctl-based debugging interface
+	  that is be used by the 'rpcdebug' utility to turn on or off
+	  logging of different aspects of the kernel RPC activity.
+
+	  Disabling this option will make your kernel slightly smaller,
+	  but makes troubleshooting NFS issues significantly harder.
+
+	  If unsure, say Y.
+
+config SUNRPC_DEBUG_TRACE
+	bool "RPC: Send dfprintk() output to the trace buffer"
+	depends on SUNRPC_DEBUG && TRACING
+	default n
+	help
+          dprintk() output can be voluminous, which can overwhelm the
+          kernel's logging facility as it must be sent to the console.
+          This option causes dprintk() output to go to the trace buffer
+          instead of the kernel log.
+
+          This will cause warnings about trace_printk() being used to be
+          logged at boot time, so say N unless you are debugging a problem
+          with sunrpc-based clients or services.
+
+config SUNRPC_XPRT_RDMA
+	tristate "RPC-over-RDMA transport"
+	depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS
+	default SUNRPC && INFINIBAND
+	select SG_POOL
+	help
+	  This option allows the NFS client and server to use RDMA
+	  transports (InfiniBand, iWARP, or RoCE).
+
+	  To compile this support as a module, choose M. The module
+	  will be called rpcrdma.ko.
+
+	  If unsure, or you know there is no RDMA capability on your
+	  hardware platform, say N.