Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 201 insertions, 0 deletions

diff --git a/net/sctp/primitive.c b/net/sctp/primitive.c
new file mode 100644
index 000000000..782d673c3
--- /dev/null
+++ b/net/sctp/primitive.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SCTP kernel implementation
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These functions implement the SCTP primitive functions from Section 10.
+ *
+ * Note that the descriptions from the specification are USER level
+ * functions--this file is the functions which populate the struct proto
+ * for SCTP which is the BOTTOM of the sockets interface.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <linux-sctp@vger.kernel.org>
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Narasimha Budihal     <narasimha@refcode.org>
+ *    Karl Knutson          <karl@athena.chicago.il.us>
+ *    Ardelle Fan	    <ardelle.fan@intel.com>
+ *    Kevin Gao             <kevin.gao@intel.com>
+ */
+
+#include <linux/types.h>
+#include <linux/list.h> /* For struct list_head */
+#include <linux/socket.h>
+#include <linux/ip.h>
+#include <linux/time.h> /* For struct timeval */
+#include <linux/gfp.h>
+#include <net/sock.h>
+#include <net/sctp/sctp.h>
+#include <net/sctp/sm.h>
+
+#define DECLARE_PRIMITIVE(name) \
+/* This is called in the code as sctp_primitive_ ## name.  */ \
+int sctp_primitive_ ## name(struct net *net, struct sctp_association *asoc, \
+			    void *arg) { \
+	int error = 0; \
+	enum sctp_event_type event_type; union sctp_subtype subtype; \
+	enum sctp_state state; \
+	struct sctp_endpoint *ep; \
+	\
+	event_type = SCTP_EVENT_T_PRIMITIVE; \
+	subtype = SCTP_ST_PRIMITIVE(SCTP_PRIMITIVE_ ## name); \
+	state = asoc ? asoc->state : SCTP_STATE_CLOSED; \
+	ep = asoc ? asoc->ep : NULL; \
+	\
+	error = sctp_do_sm(net, event_type, subtype, state, ep, asoc,	\
+			   arg, GFP_KERNEL); \
+	return error; \
+}
+
+/* 10.1 ULP-to-SCTP
+ * B) Associate
+ *
+ * Format: ASSOCIATE(local SCTP instance name, destination transport addr,
+ *         outbound stream count)
+ * -> association id [,destination transport addr list] [,outbound stream
+ *    count]
+ *
+ * This primitive allows the upper layer to initiate an association to a
+ * specific peer endpoint.
+ *
+ * This version assumes that asoc is fully populated with the initial
+ * parameters.  We then return a traditional kernel indicator of
+ * success or failure.
+ */
+
+/* This is called in the code as sctp_primitive_ASSOCIATE.  */
+
+DECLARE_PRIMITIVE(ASSOCIATE)
+
+/* 10.1 ULP-to-SCTP
+ * C) Shutdown
+ *
+ * Format: SHUTDOWN(association id)
+ * -> result
+ *
+ * Gracefully closes an association. Any locally queued user data
+ * will be delivered to the peer. The association will be terminated only
+ * after the peer acknowledges all the SCTP packets sent.  A success code
+ * will be returned on successful termination of the association. If
+ * attempting to terminate the association results in a failure, an error
+ * code shall be returned.
+ */
+
+DECLARE_PRIMITIVE(SHUTDOWN);
+
+/* 10.1 ULP-to-SCTP
+ * C) Abort
+ *
+ * Format: Abort(association id [, cause code])
+ * -> result
+ *
+ * Ungracefully closes an association. Any locally queued user data
+ * will be discarded and an ABORT chunk is sent to the peer. A success
+ * code will be returned on successful abortion of the association. If
+ * attempting to abort the association results in a failure, an error
+ * code shall be returned.
+ */
+
+DECLARE_PRIMITIVE(ABORT);
+
+/* 10.1 ULP-to-SCTP
+ * E) Send
+ *
+ * Format: SEND(association id, buffer address, byte count [,context]
+ *         [,stream id] [,life time] [,destination transport address]
+ *         [,unorder flag] [,no-bundle flag] [,payload protocol-id] )
+ * -> result
+ *
+ * This is the main method to send user data via SCTP.
+ *
+ * Mandatory attributes:
+ *
+ *  o association id - local handle to the SCTP association
+ *
+ *  o buffer address - the location where the user message to be
+ *    transmitted is stored;
+ *
+ *  o byte count - The size of the user data in number of bytes;
+ *
+ * Optional attributes:
+ *
+ *  o context - an optional 32 bit integer that will be carried in the
+ *    sending failure notification to the ULP if the transportation of
+ *    this User Message fails.
+ *
+ *  o stream id - to indicate which stream to send the data on. If not
+ *    specified, stream 0 will be used.
+ *
+ *  o life time - specifies the life time of the user data. The user data
+ *    will not be sent by SCTP after the life time expires. This
+ *    parameter can be used to avoid efforts to transmit stale
+ *    user messages. SCTP notifies the ULP if the data cannot be
+ *    initiated to transport (i.e. sent to the destination via SCTP's
+ *    send primitive) within the life time variable. However, the
+ *    user data will be transmitted if SCTP has attempted to transmit a
+ *    chunk before the life time expired.
+ *
+ *  o destination transport address - specified as one of the destination
+ *    transport addresses of the peer endpoint to which this packet
+ *    should be sent. Whenever possible, SCTP should use this destination
+ *    transport address for sending the packets, instead of the current
+ *    primary path.
+ *
+ *  o unorder flag - this flag, if present, indicates that the user
+ *    would like the data delivered in an unordered fashion to the peer
+ *    (i.e., the U flag is set to 1 on all DATA chunks carrying this
+ *    message).
+ *
+ *  o no-bundle flag - instructs SCTP not to bundle this user data with
+ *    other outbound DATA chunks. SCTP MAY still bundle even when
+ *    this flag is present, when faced with network congestion.
+ *
+ *  o payload protocol-id - A 32 bit unsigned integer that is to be
+ *    passed to the peer indicating the type of payload protocol data
+ *    being transmitted. This value is passed as opaque data by SCTP.
+ */
+
+DECLARE_PRIMITIVE(SEND);
+
+/* 10.1 ULP-to-SCTP
+ * J) Request Heartbeat
+ *
+ * Format: REQUESTHEARTBEAT(association id, destination transport address)
+ *
+ * -> result
+ *
+ * Instructs the local endpoint to perform a HeartBeat on the specified
+ * destination transport address of the given association. The returned
+ * result should indicate whether the transmission of the HEARTBEAT
+ * chunk to the destination address is successful.
+ *
+ * Mandatory attributes:
+ *
+ * o association id - local handle to the SCTP association
+ *
+ * o destination transport address - the transport address of the
+ *   association on which a heartbeat should be issued.
+ */
+
+DECLARE_PRIMITIVE(REQUESTHEARTBEAT);
+
+/* ADDIP
+* 3.1.1 Address Configuration Change Chunk (ASCONF)
+*
+* This chunk is used to communicate to the remote endpoint one of the
+* configuration change requests that MUST be acknowledged.  The
+* information carried in the ASCONF Chunk uses the form of a
+* Type-Length-Value (TLV), as described in "3.2.1 Optional/
+* Variable-length Parameter Format" in RFC2960 [5], forall variable
+* parameters.
+*/
+
+DECLARE_PRIMITIVE(ASCONF);
+
+/* RE-CONFIG 5.1 */
+DECLARE_PRIMITIVE(RECONF);