sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted

alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:

	env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable

But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.

So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.

Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.

nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.

Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com

1 files changed, 94 insertions, 0 deletions

diff --git a/net/mac80211/wbrf.c b/net/mac80211/wbrf.c
new file mode 100644
index 000000000..478b34b81
--- /dev/null
+++ b/net/mac80211/wbrf.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wifi Band Exclusion Interface for WLAN
+ * Copyright (C) 2023 Advanced Micro Devices
+ * Copyright (C) 2025 Intel Corporation
+ *
+ */
+
+#include <linux/acpi_amd_wbrf.h>
+#include <linux/units.h>
+#include <net/cfg80211.h>
+#include "ieee80211_i.h"
+
+void ieee80211_check_wbrf_support(struct ieee80211_local *local)
+{
+	struct wiphy *wiphy = local->hw.wiphy;
+	struct device *dev;
+
+	if (!wiphy)
+		return;
+
+	dev = wiphy->dev.parent;
+	if (!dev)
+		return;
+
+	local->wbrf_supported = acpi_amd_wbrf_supported_producer(dev);
+}
+
+static void get_chan_freq_boundary(u32 center_freq, u32 bandwidth, u64 *start, u64 *end)
+{
+	bandwidth *= KHZ_PER_MHZ;
+	center_freq *= KHZ_PER_MHZ;
+
+	*start = center_freq - bandwidth / 2;
+	*end = center_freq + bandwidth / 2;
+
+	/* Frequency in Hz is expected */
+	*start = *start * HZ_PER_KHZ;
+	*end = *end * HZ_PER_KHZ;
+}
+
+static void get_ranges_from_chandef(struct cfg80211_chan_def *chandef,
+				    struct wbrf_ranges_in_out *ranges_in)
+{
+	u64 start_freq1, end_freq1;
+	u64 start_freq2, end_freq2;
+	int bandwidth;
+
+	bandwidth = cfg80211_chandef_get_width(chandef);
+
+	get_chan_freq_boundary(chandef->center_freq1, bandwidth, &start_freq1, &end_freq1);
+
+	ranges_in->band_list[0].start = start_freq1;
+	ranges_in->band_list[0].end = end_freq1;
+	ranges_in->num_of_ranges = 1;
+
+	if (chandef->width == NL80211_CHAN_WIDTH_80P80) {
+		get_chan_freq_boundary(chandef->center_freq2, bandwidth, &start_freq2, &end_freq2);
+
+		ranges_in->band_list[1].start = start_freq2;
+		ranges_in->band_list[1].end = end_freq2;
+		ranges_in->num_of_ranges++;
+	}
+}
+
+void ieee80211_add_wbrf(struct ieee80211_local *local, struct cfg80211_chan_def *chandef)
+{
+	struct wbrf_ranges_in_out ranges_in = {0};
+	struct device *dev;
+
+	if (!local->wbrf_supported)
+		return;
+
+	dev = local->hw.wiphy->dev.parent;
+
+	get_ranges_from_chandef(chandef, &ranges_in);
+
+	acpi_amd_wbrf_add_remove(dev, WBRF_RECORD_ADD, &ranges_in);
+}
+
+void ieee80211_remove_wbrf(struct ieee80211_local *local, struct cfg80211_chan_def *chandef)
+{
+	struct wbrf_ranges_in_out ranges_in = {0};
+	struct device *dev;
+
+	if (!local->wbrf_supported)
+		return;
+
+	dev = local->hw.wiphy->dev.parent;
+
+	get_ranges_from_chandef(chandef, &ranges_in);
+
+	acpi_amd_wbrf_add_remove(dev, WBRF_RECORD_REMOVE, &ranges_in);
+}