Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

11 files changed, 2124 insertions, 0 deletions

diff --git a/net/mac80211/tests/.kunitconfig b/net/mac80211/tests/.kunitconfig
new file mode 100644
index 000000000..ab2cc5cfc
--- /dev/null
+++ b/net/mac80211/tests/.kunitconfig
@@ -0,0 +1,4 @@
+CONFIG_KUNIT=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_KUNIT_TEST=y
diff --git a/net/mac80211/tests/Makefile b/net/mac80211/tests/Makefile
new file mode 100644
index 000000000..2e9ade90f
--- /dev/null
+++ b/net/mac80211/tests/Makefile
@@ -0,0 +1,3 @@
+mac80211-tests-y += module.o util.o elems.o mfp.o tpe.o chan-mode.o s1g_tim.o ttlm.o
+
+obj-$(CONFIG_MAC80211_KUNIT_TEST) += mac80211-tests.o
diff --git a/net/mac80211/tests/chan-mode.c b/net/mac80211/tests/chan-mode.c
new file mode 100644
index 000000000..ab7d38ef6
--- /dev/null
+++ b/net/mac80211/tests/chan-mode.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for channel mode functions
+ *
+ * Copyright (C) 2024-2026 Intel Corporation
+ */
+#include <net/cfg80211.h>
+#include <kunit/test.h>
+
+#include "util.h"
+
+MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING");
+
+static const struct determine_chan_mode_case {
+	const char *desc;
+	u8 extra_supp_rate;
+	enum ieee80211_conn_mode conn_mode;
+	enum ieee80211_conn_mode expected_mode;
+	bool strict;
+	u8 userspace_selector;
+	struct ieee80211_ht_cap ht_capa_mask;
+	struct ieee80211_vht_cap vht_capa;
+	struct ieee80211_vht_cap vht_capa_mask;
+	u8 vht_basic_mcs_1_4_set:1,
+	   vht_basic_mcs_5_8_set:1,
+	   he_basic_mcs_1_4_set:1,
+	   he_basic_mcs_5_8_set:1;
+	u8 vht_basic_mcs_1_4, vht_basic_mcs_5_8;
+	u8 he_basic_mcs_1_4, he_basic_mcs_5_8;
+	u8 eht_mcs7_min_nss;
+	u16 eht_disabled_subchannels;
+	u8 eht_bw;
+	enum ieee80211_conn_bw_limit conn_bw_limit;
+	enum ieee80211_conn_bw_limit expected_bw_limit;
+	int error;
+} determine_chan_mode_cases[] = {
+	{
+		.desc = "Normal case, EHT is working",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_EHT,
+	}, {
+		.desc = "Requiring EHT support is fine",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_EHT,
+		.extra_supp_rate = 0x80 | BSS_MEMBERSHIP_SELECTOR_EHT_PHY,
+	}, {
+		.desc = "Lowering the mode limits us",
+		.conn_mode = IEEE80211_CONN_MODE_VHT,
+		.expected_mode = IEEE80211_CONN_MODE_VHT,
+	}, {
+		.desc = "Requesting a basic rate/selector that we do not support",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.extra_supp_rate = 0x80 | (BSS_MEMBERSHIP_SELECTOR_MIN - 1),
+		.error = EINVAL,
+	}, {
+		.desc = "As before, but userspace says it is taking care of it",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.userspace_selector = BSS_MEMBERSHIP_SELECTOR_MIN - 1,
+		.extra_supp_rate = 0x80 | (BSS_MEMBERSHIP_SELECTOR_MIN - 1),
+		.expected_mode = IEEE80211_CONN_MODE_EHT,
+	}, {
+		.desc = "Masking out a supported rate in HT capabilities",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_LEGACY,
+		.ht_capa_mask = {
+			.mcs.rx_mask[0] = 0xf7,
+		},
+		.strict = true,
+	}, {
+		.desc = "Masking out a RX rate in VHT capabilities",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HT,
+		/* Only one RX stream at MCS 0-7 */
+		.vht_capa = {
+			.supp_mcs.rx_mcs_map =
+				cpu_to_le16(IEEE80211_VHT_MCS_SUPPORT_0_7),
+		},
+		.vht_capa_mask = {
+			.supp_mcs.rx_mcs_map = cpu_to_le16(0xffff),
+		},
+		.strict = true,
+	}, {
+		.desc = "Masking out a TX rate in VHT capabilities",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HT,
+		/* Only one TX stream at MCS 0-7 */
+		.vht_capa = {
+			.supp_mcs.tx_mcs_map =
+				cpu_to_le16(IEEE80211_VHT_MCS_SUPPORT_0_7),
+		},
+		.vht_capa_mask = {
+			.supp_mcs.tx_mcs_map = cpu_to_le16(0xffff),
+		},
+		.strict = true,
+	}, {
+		.desc = "AP has higher VHT requirement than client",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HT,
+		.vht_basic_mcs_5_8_set = 1,
+		.vht_basic_mcs_5_8 = 0xFE, /* require 5th stream */
+		.strict = true,
+	}, {
+		.desc = "all zero VHT basic rates are ignored (many APs broken)",
+		.conn_mode = IEEE80211_CONN_MODE_VHT,
+		.expected_mode = IEEE80211_CONN_MODE_VHT,
+		.vht_basic_mcs_1_4_set = 1,
+		.vht_basic_mcs_5_8_set = 1,
+	}, {
+		.desc = "AP requires 3 HE streams but client only has two",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_VHT,
+		.he_basic_mcs_1_4 = 0b11001010,
+		.he_basic_mcs_1_4_set = 1,
+	}, {
+		.desc = "all zero HE basic rates are ignored (iPhone workaround)",
+		.conn_mode = IEEE80211_CONN_MODE_HE,
+		.expected_mode = IEEE80211_CONN_MODE_HE,
+		.he_basic_mcs_1_4_set = 1,
+		.he_basic_mcs_5_8_set = 1,
+	}, {
+		.desc = "AP requires too many RX streams with EHT MCS 7",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HE,
+		.eht_mcs7_min_nss = 0x15,
+	}, {
+		.desc = "AP requires too many TX streams with EHT MCS 7",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HE,
+		.eht_mcs7_min_nss = 0x51,
+	}, {
+		.desc = "AP requires too many RX streams with EHT MCS 7 and EHT is required",
+		.extra_supp_rate = 0x80 | BSS_MEMBERSHIP_SELECTOR_EHT_PHY,
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.eht_mcs7_min_nss = 0x15,
+		.error = EINVAL,
+	}, {
+		.desc = "80 MHz EHT is downgraded to 40 MHz HE due to puncturing",
+		.conn_mode = IEEE80211_CONN_MODE_EHT,
+		.expected_mode = IEEE80211_CONN_MODE_HE,
+		.conn_bw_limit = IEEE80211_CONN_BW_LIMIT_80,
+		.expected_bw_limit = IEEE80211_CONN_BW_LIMIT_40,
+		.eht_disabled_subchannels = 0x08,
+		.eht_bw = IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ,
+	}
+};
+KUNIT_ARRAY_PARAM_DESC(determine_chan_mode, determine_chan_mode_cases, desc)
+
+static void test_determine_chan_mode(struct kunit *test)
+{
+	const struct determine_chan_mode_case *params = test->param_value;
+	struct t_sdata *t_sdata = T_SDATA(test);
+	struct ieee80211_conn_settings conn = {
+		.mode = params->conn_mode,
+		.bw_limit = params->conn_bw_limit,
+	};
+	struct cfg80211_bss cbss = {
+		.channel = &t_sdata->band_5ghz.channels[0],
+	};
+	unsigned long userspace_selectors[BITS_TO_LONGS(128)] = {};
+	u8 bss_ies[] = {
+		/* Supported Rates */
+		WLAN_EID_SUPP_RATES, 0x08,
+		0x82, 0x84, 0x8b, 0x96, 0xc, 0x12, 0x18, 0x24,
+		/* Extended Supported Rates */
+		WLAN_EID_EXT_SUPP_RATES, 0x05,
+		0x30, 0x48, 0x60, 0x6c, params->extra_supp_rate,
+		/* HT Capabilities */
+		WLAN_EID_HT_CAPABILITY, 0x1a,
+		0x0c, 0x00, 0x1b, 0xff, 0xff, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00,
+		/* HT Information (0xff for 1 stream) */
+		WLAN_EID_HT_OPERATION, 0x16,
+		0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/* VHT Capabilities */
+		WLAN_EID_VHT_CAPABILITY, 0xc,
+		0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00,
+		0xff, 0xff, 0x00, 0x00,
+		/* VHT Operation */
+		WLAN_EID_VHT_OPERATION, 0x05,
+		0x00, 0x00, 0x00,
+		params->vht_basic_mcs_1_4_set ?
+			params->vht_basic_mcs_1_4 :
+			le16_get_bits(t_sdata->band_5ghz.vht_cap.vht_mcs.rx_mcs_map, 0xff),
+		params->vht_basic_mcs_5_8_set ?
+			params->vht_basic_mcs_5_8 :
+			le16_get_bits(t_sdata->band_5ghz.vht_cap.vht_mcs.rx_mcs_map, 0xff00),
+		/* HE Capabilities */
+		WLAN_EID_EXTENSION, 0x16, WLAN_EID_EXT_HE_CAPABILITY,
+		0x01, 0x78, 0xc8, 0x1a, 0x40, 0x00, 0x00, 0xbf,
+		0xce, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0xfa, 0xff, 0xfa, 0xff,
+		/* HE Operation (permit overriding values) */
+		WLAN_EID_EXTENSION, 0x07, WLAN_EID_EXT_HE_OPERATION,
+		0xf0, 0x3f, 0x00, 0xb0,
+		params->he_basic_mcs_1_4_set ? params->he_basic_mcs_1_4 : 0xfc,
+		params->he_basic_mcs_5_8_set ? params->he_basic_mcs_5_8 : 0xff,
+		/* EHT Capabilities */
+		WLAN_EID_EXTENSION, 0x12, WLAN_EID_EXT_EHT_CAPABILITY,
+		0x07, 0x00, 0x1c, 0x00, 0x00, 0xfe, 0xff, 0xff,
+		0x7f, 0x01, 0x00, 0x88, 0x88, 0x88, 0x00, 0x00,
+		0x00,
+		/* EHT Operation */
+		WLAN_EID_EXTENSION, 0x0b, WLAN_EID_EXT_EHT_OPERATION,
+		0x03, params->eht_mcs7_min_nss ? params->eht_mcs7_min_nss : 0x11,
+		0x00, 0x00, 0x00, params->eht_bw,
+		params->eht_bw == IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ ? 42 : 36,
+		0x00,
+		u16_get_bits(params->eht_disabled_subchannels, 0xff),
+		u16_get_bits(params->eht_disabled_subchannels, 0xff00),
+	};
+	struct ieee80211_chan_req chanreq = {};
+	struct cfg80211_chan_def ap_chandef = {};
+	struct ieee802_11_elems *elems;
+
+	/* To force EHT downgrade to HE on punctured 80 MHz downgraded to 40 MHz */
+	set_bit(IEEE80211_HW_DISALLOW_PUNCTURING, t_sdata->local.hw.flags);
+
+	if (params->strict)
+		set_bit(IEEE80211_HW_STRICT, t_sdata->local.hw.flags);
+	else
+		clear_bit(IEEE80211_HW_STRICT, t_sdata->local.hw.flags);
+
+	t_sdata->sdata->u.mgd.ht_capa_mask = params->ht_capa_mask;
+	t_sdata->sdata->u.mgd.vht_capa = params->vht_capa;
+	t_sdata->sdata->u.mgd.vht_capa_mask = params->vht_capa_mask;
+
+	if (params->userspace_selector)
+		set_bit(params->userspace_selector, userspace_selectors);
+
+	rcu_assign_pointer(cbss.ies,
+			   kunit_kzalloc(test,
+					 sizeof(cbss) + sizeof(bss_ies),
+					 GFP_KERNEL));
+	KUNIT_ASSERT_NOT_NULL(test, rcu_access_pointer(cbss.ies));
+	((struct cfg80211_bss_ies *)rcu_access_pointer(cbss.ies))->len = sizeof(bss_ies);
+
+	memcpy((void *)rcu_access_pointer(cbss.ies)->data, bss_ies,
+	       sizeof(bss_ies));
+
+	rcu_read_lock();
+	elems = ieee80211_determine_chan_mode(t_sdata->sdata, &conn, &cbss,
+					      NULL, 0, &chanreq, &ap_chandef,
+					      userspace_selectors);
+	rcu_read_unlock();
+
+	/* We do not need elems, free them if they are valid. */
+	if (!IS_ERR_OR_NULL(elems))
+		kfree(elems);
+
+	if (params->error) {
+		KUNIT_ASSERT_TRUE(test, IS_ERR(elems));
+		KUNIT_ASSERT_EQ(test, PTR_ERR(elems), -params->error);
+	} else {
+		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, elems);
+		KUNIT_ASSERT_EQ(test, conn.mode, params->expected_mode);
+		KUNIT_ASSERT_EQ(test, conn.bw_limit, params->expected_bw_limit);
+	}
+}
+
+static struct kunit_case chan_mode_cases[] = {
+	KUNIT_CASE_PARAM(test_determine_chan_mode,
+			 determine_chan_mode_gen_params),
+	{}
+};
+
+static struct kunit_suite chan_mode = {
+	.name = "mac80211-mlme-chan-mode",
+	.test_cases = chan_mode_cases,
+};
+
+kunit_test_suite(chan_mode);
diff --git a/net/mac80211/tests/elems.c b/net/mac80211/tests/elems.c
new file mode 100644
index 000000000..4b13a5aad
--- /dev/null
+++ b/net/mac80211/tests/elems.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for element parsing
+ *
+ * Copyright (C) 2023-2025 Intel Corporation
+ */
+#include <kunit/test.h>
+#include "../ieee80211_i.h"
+
+MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING");
+
+static const struct mesh_preq_parse_test_case {
+	const char *desc;
+	u8 len;
+	bool ae_enabled;
+	u8 target_count;
+	bool result;
+} mesh_preq_parse_cases[] = {
+	{
+		.desc = "shorter than header",
+		.len = 16,
+		.ae_enabled = false,
+		.target_count = 1,
+		.result = false,
+	},
+	{
+		.desc = "too short non AE, target count is not included",
+		.len = 29,
+		.ae_enabled = false,
+		.target_count = 1,
+		.result = false,
+	},
+	{
+		.desc = "too short non AE, target count is 1",
+		.len = 36,
+		.ae_enabled = false,
+		.target_count = 1,
+		.result = false,
+	},
+	{
+		.desc = "too short AE, target count is not included",
+		.len = 35,
+		.ae_enabled = true,
+		.target_count = 1,
+		.result = false,
+	},
+	{
+		.desc = "too short AE, target count is 1",
+		.len = 42,
+		.ae_enabled = true,
+		.target_count = 1,
+		.result = false,
+	},
+	{
+		.desc = "target count is zero",
+		.len = 26,
+		.ae_enabled = false,
+		.target_count = 0,
+		.result = false,
+	},
+	{
+		.desc = "target count is 21",
+		.len = 255,
+		.ae_enabled = false,
+		.target_count = 21,
+		.result = false,
+	},
+	{
+		.desc = "non AE, target count is 1",
+		.len = 37,
+		.ae_enabled = false,
+		.target_count = 1,
+		.result = true,
+	},
+	{
+		.desc = "non AE, target count is 20",
+		.len = 246,
+		.ae_enabled = false,
+		.target_count = 20,
+		.result = true,
+	},
+	{
+		.desc = "AE, target count is 1",
+		.len = 43,
+		.ae_enabled = true,
+		.target_count = 1,
+		.result = true,
+	},
+	{
+		.desc = "AE, target count is 20",
+		.len = 252,
+		.ae_enabled = true,
+		.target_count = 20,
+		.result = true,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(mesh_preq_parse, mesh_preq_parse_cases, desc);
+
+static const struct mesh_prep_parse_test_case {
+	const char *desc;
+	u8 len;
+	bool ae_enabled;
+	bool result;
+} mesh_prep_parse_cases[] = {
+	{
+		.desc = "shorter than header",
+		.len = 12,
+		.ae_enabled = false,
+		.result = false,
+	},
+	{
+		.desc = "non AE short",
+		.len = 30,
+		.ae_enabled = false,
+		.result = false,
+	},
+	{
+		.desc = "non AE",
+		.len = 31,
+		.ae_enabled = false,
+		.result = true,
+	},
+	{
+		.desc = "AE short",
+		.len = 36,
+		.ae_enabled = true,
+		.result = false,
+	},
+	{
+		.desc = "AE",
+		.len = 37,
+		.ae_enabled = true,
+		.result = true,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(mesh_prep_parse, mesh_prep_parse_cases, desc);
+
+static const struct mesh_perr_parse_test_case {
+	const char *desc;
+	u8 len;
+	u8 number_of_dst;
+	int ae_enabled_idx;
+	bool result;
+} mesh_perr_parse_cases[] = {
+	{
+		.desc = "shorter than header",
+		.len = 1,
+		.number_of_dst = 1,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 0",
+		.len = 2,
+		.number_of_dst = 0,
+		.ae_enabled_idx = -1,
+		.result = true,
+	},
+	{
+		.desc = "number_of_dst is 20",
+		.len = 255,
+		.number_of_dst = 20,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 1, non AE, short",
+		.len = 14,
+		.number_of_dst = 1,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 1, non AE",
+		.len = 15,
+		.number_of_dst = 1,
+		.ae_enabled_idx = -1,
+		.result = true,
+	},
+	{
+		.desc = "number_of_dst is 1, non AE, extra short dst header",
+		.len = 25,
+		.number_of_dst = 1,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 1, non AE, extra dst header",
+		.len = 26,
+		.number_of_dst = 1,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 1, AE, short",
+		.len = 20,
+		.number_of_dst = 1,
+		.ae_enabled_idx = 0,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 1, AE",
+		.len = 21,
+		.number_of_dst = 1,
+		.ae_enabled_idx = 0,
+		.result = true,
+	},
+	{
+		.desc = "number_of_dst is 19, non AE, short",
+		.len = 2 + 13 * 19 - 1,
+		.number_of_dst = 19,
+		.ae_enabled_idx = -1,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 19, non AE",
+		.len = 2 + 13 * 19,
+		.number_of_dst = 19,
+		.ae_enabled_idx = -1,
+		.result = true,
+	},
+	{
+		.desc = "number_of_dst is 19, AE, short",
+		.len = 2 + 13 * 19 + 6 - 1,
+		.number_of_dst = 19,
+		.ae_enabled_idx = 18,
+		.result = false,
+	},
+	{
+		.desc = "number_of_dst is 19, AE",
+		.len = 2 + 13 * 19 + 6,
+		.number_of_dst = 19,
+		.ae_enabled_idx = 18,
+		.result = true,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(mesh_perr_parse, mesh_perr_parse_cases, desc);
+
+
+static void mle_defrag(struct kunit *test)
+{
+	struct ieee80211_elems_parse_params parse_params = {
+		.link_id = 12,
+		.from_ap = true,
+		.mode = IEEE80211_CONN_MODE_EHT,
+		/* type is not really relevant here */
+		.type = IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON,
+	};
+	struct ieee802_11_elems *parsed;
+	struct sk_buff *skb;
+	u8 *len_mle, *len_prof;
+	int i;
+
+	skb = alloc_skb(1024, GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, skb);
+
+	if (skb_pad(skb, skb_tailroom(skb))) {
+		KUNIT_FAIL(test, "failed to pad skb");
+		return;
+	}
+
+	/* build a multi-link element */
+	skb_put_u8(skb, WLAN_EID_EXTENSION);
+	len_mle = skb_put(skb, 1);
+	skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK);
+
+	put_unaligned_le16(IEEE80211_ML_CONTROL_TYPE_BASIC,
+			   skb_put(skb, 2));
+	/* struct ieee80211_mle_basic_common_info */
+	skb_put_u8(skb, 7); /* includes len field */
+	skb_put_data(skb, "\x00\x00\x00\x00\x00\x00", ETH_ALEN); /* MLD addr */
+
+	/* with a STA profile inside */
+	skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE);
+	len_prof = skb_put(skb, 1);
+	put_unaligned_le16(IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE |
+			   parse_params.link_id,
+			   skb_put(skb, 2));
+	skb_put_u8(skb, 1); /* fake sta_info_len - includes itself */
+	/* put a bunch of useless elements into it */
+	for (i = 0; i < 20; i++) {
+		skb_put_u8(skb, WLAN_EID_SSID);
+		skb_put_u8(skb, 20);
+		skb_put(skb, 20);
+	}
+
+	/* fragment STA profile */
+	ieee80211_fragment_element(skb, len_prof,
+				   IEEE80211_MLE_SUBELEM_FRAGMENT);
+	/* fragment MLE */
+	ieee80211_fragment_element(skb, len_mle, WLAN_EID_FRAGMENT);
+
+	parse_params.start = skb->data;
+	parse_params.len = skb->len;
+	parsed = ieee802_11_parse_elems_full(&parse_params);
+	/* should return ERR_PTR or valid, not NULL */
+	KUNIT_EXPECT_NOT_NULL(test, parsed);
+
+	if (IS_ERR_OR_NULL(parsed))
+		goto free_skb;
+
+	KUNIT_EXPECT_NOT_NULL(test, parsed->ml_basic);
+	KUNIT_EXPECT_EQ(test,
+			parsed->ml_basic_len,
+			2 /* control */ +
+			7 /* common info */ +
+			2 /* sta profile element header */ +
+			3 /* sta profile header */ +
+			20 * 22 /* sta profile data */ +
+			2 /* sta profile fragment element */);
+	KUNIT_EXPECT_NOT_NULL(test, parsed->prof);
+	KUNIT_EXPECT_EQ(test,
+			parsed->sta_prof_len,
+			3 /* sta profile header */ +
+			20 * 22 /* sta profile data */);
+
+	kfree(parsed);
+free_skb:
+	kfree_skb(skb);
+}
+
+static void mesh_preq_parse(struct kunit *test)
+{
+	const struct mesh_preq_parse_test_case *params = test->param_value;
+	u8 data[64] = {};
+	struct ieee80211_mesh_hwmp_preq_top *top = (void *)data;
+	struct ieee80211_mesh_hwmp_preq_bottom *bottom;
+
+	top->flags = params->ae_enabled ? AE_F : 0;
+	bottom = ieee80211_mesh_hwmp_preq_get_bottom(data);
+	bottom->target_count = params->target_count;
+
+	KUNIT_EXPECT_EQ(test,
+			ieee80211_mesh_preq_size_ok(data, params->len),
+			params->result);
+}
+
+static void mesh_prep_parse(struct kunit *test)
+{
+	const struct mesh_prep_parse_test_case *params = test->param_value;
+	u8 data[64] = {};
+	struct ieee80211_mesh_hwmp_prep_top *top = (void *)data;
+	top->flags = params->ae_enabled ? AE_F : 0;
+
+	KUNIT_EXPECT_EQ(test,
+			ieee80211_mesh_prep_size_ok(data, params->len),
+			params->result);
+}
+
+static void mesh_perr_parse(struct kunit *test)
+{
+	const struct mesh_perr_parse_test_case *params = test->param_value;
+	u8 data[256] = {};
+	struct ieee80211_mesh_hwmp_perr *perr = (void *)data;
+
+	perr->number_of_dst = params->number_of_dst;
+	if (params->ae_enabled_idx > -1) {
+		struct ieee80211_mesh_hwmp_perr_dst *dst =
+			ieee80211_mesh_hwmp_perr_get_dst(
+				data, params->ae_enabled_idx);
+
+		dst->flags = AE_F;
+	}
+
+	KUNIT_EXPECT_EQ(test,
+			ieee80211_mesh_perr_size_ok(data, params->len),
+			params->result);
+}
+
+static struct kunit_case element_parsing_test_cases[] = {
+	KUNIT_CASE(mle_defrag),
+	KUNIT_CASE_PARAM(mesh_preq_parse, mesh_preq_parse_gen_params),
+	KUNIT_CASE_PARAM(mesh_prep_parse, mesh_prep_parse_gen_params),
+	KUNIT_CASE_PARAM(mesh_perr_parse, mesh_perr_parse_gen_params),
+	{}
+};
+
+static struct kunit_suite element_parsing = {
+	.name = "mac80211-element-parsing",
+	.test_cases = element_parsing_test_cases,
+};
+
+kunit_test_suite(element_parsing);
diff --git a/net/mac80211/tests/mfp.c b/net/mac80211/tests/mfp.c
new file mode 100644
index 000000000..58e675e0e
--- /dev/null
+++ b/net/mac80211/tests/mfp.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for management frame acceptance
+ *
+ * Copyright (C) 2023 Intel Corporation
+ */
+#include <kunit/test.h>
+#include <kunit/skbuff.h>
+#include "../ieee80211_i.h"
+#include "../sta_info.h"
+
+MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING");
+
+static const struct mfp_test_case {
+	const char *desc;
+	bool sta, mfp, decrypted, unicast, assoc;
+	u8 category;
+	u8 stype;
+	u8 action;
+	ieee80211_rx_result result;
+} accept_mfp_cases[] = {
+	/* regular public action */
+	{
+		.desc = "public action: accept unicast from unknown peer",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "public action: accept multicast from unknown peer",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "public action: accept unicast without MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.sta = true,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "public action: accept multicast without MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.sta = true,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "public action: drop unicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.sta = true,
+		.mfp = true,
+		.result = RX_DROP_U_UNPROT_UNICAST_PUB_ACTION,
+	},
+	{
+		.desc = "public action: accept multicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PUBLIC,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.sta = true,
+		.mfp = true,
+		.result = RX_CONTINUE,
+	},
+	/* protected dual of public action */
+	{
+		.desc = "protected dual: drop unicast from unknown peer",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: drop multicast from unknown peer",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: drop unicast without MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.sta = true,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: drop multicast without MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.sta = true,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: drop undecrypted unicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = true,
+		.sta = true,
+		.mfp = true,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: drop undecrypted multicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.unicast = false,
+		.sta = true,
+		.mfp = true,
+		.result = RX_DROP_U_UNPROT_DUAL,
+	},
+	{
+		.desc = "protected dual: accept unicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.decrypted = true,
+		.unicast = true,
+		.sta = true,
+		.mfp = true,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "protected dual: accept multicast with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION,
+		.action = WLAN_PUB_ACTION_DSE_ENABLEMENT,
+		.decrypted = true,
+		.unicast = false,
+		.sta = true,
+		.mfp = true,
+		.result = RX_CONTINUE,
+	},
+	/* deauth/disassoc before keys are set */
+	{
+		.desc = "deauth: accept unicast with MFP but w/o key",
+		.stype = IEEE80211_STYPE_DEAUTH,
+		.sta = true,
+		.mfp = true,
+		.unicast = true,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "disassoc: accept unicast with MFP but w/o key",
+		.stype = IEEE80211_STYPE_DEAUTH,
+		.sta = true,
+		.mfp = true,
+		.unicast = true,
+		.result = RX_CONTINUE,
+	},
+	/* non-public robust action frame ... */
+	{
+		.desc = "BA action: drop unicast before assoc",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_BACK,
+		.unicast = true,
+		.sta = true,
+		.result = RX_DROP_U_UNPROT_ROBUST_ACTION,
+	},
+	{
+		.desc = "BA action: drop unprotected after assoc",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_BACK,
+		.unicast = true,
+		.sta = true,
+		.mfp = true,
+		.result = RX_DROP_U_UNPROT_UCAST_MGMT,
+	},
+	{
+		.desc = "BA action: accept unprotected without MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_BACK,
+		.unicast = true,
+		.sta = true,
+		.assoc = true,
+		.mfp = false,
+		.result = RX_CONTINUE,
+	},
+	{
+		.desc = "BA action: drop unprotected with MFP",
+		.stype = IEEE80211_STYPE_ACTION,
+		.category = WLAN_CATEGORY_BACK,
+		.unicast = true,
+		.sta = true,
+		.mfp = true,
+		.result = RX_DROP_U_UNPROT_UCAST_MGMT,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(accept_mfp, accept_mfp_cases, desc);
+
+static void accept_mfp(struct kunit *test)
+{
+	static struct sta_info sta;
+	const struct mfp_test_case *params = test->param_value;
+	struct ieee80211_rx_data rx = {
+		.sta = params->sta ? &sta : NULL,
+	};
+	struct ieee80211_rx_status *status;
+	struct ieee80211_hdr_3addr hdr = {
+		.frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+					     params->stype),
+		.addr1 = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
+		.addr2 = { 0x12, 0x22, 0x33, 0x44, 0x55, 0x66 },
+		/* A3/BSSID doesn't matter here */
+	};
+
+	memset(&sta, 0, sizeof(sta));
+
+	if (!params->sta) {
+		KUNIT_ASSERT_FALSE(test, params->mfp);
+		KUNIT_ASSERT_FALSE(test, params->decrypted);
+	}
+
+	if (params->mfp)
+		set_sta_flag(&sta, WLAN_STA_MFP);
+
+	if (params->assoc)
+		set_bit(WLAN_STA_ASSOC, &sta._flags);
+
+	rx.skb = kunit_zalloc_skb(test, 128, GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, rx.skb);
+	status = IEEE80211_SKB_RXCB(rx.skb);
+
+	if (params->decrypted) {
+		status->flag |= RX_FLAG_DECRYPTED;
+		if (params->unicast)
+			hdr.frame_control |=
+				cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+	}
+
+	if (params->unicast)
+		hdr.addr1[0] = 0x02;
+
+	skb_put_data(rx.skb, &hdr, sizeof(hdr));
+
+	switch (params->stype) {
+	case IEEE80211_STYPE_ACTION:
+		skb_put_u8(rx.skb, params->category);
+		skb_put_u8(rx.skb, params->action);
+		break;
+	case IEEE80211_STYPE_DEAUTH:
+	case IEEE80211_STYPE_DISASSOC: {
+		__le16 reason = cpu_to_le16(WLAN_REASON_UNSPECIFIED);
+
+		skb_put_data(rx.skb, &reason, sizeof(reason));
+		}
+		break;
+	}
+
+	KUNIT_EXPECT_EQ(test,
+			(__force u32)ieee80211_drop_unencrypted_mgmt(&rx),
+			(__force u32)params->result);
+}
+
+static struct kunit_case mfp_test_cases[] = {
+	KUNIT_CASE_PARAM(accept_mfp, accept_mfp_gen_params),
+	{}
+};
+
+static struct kunit_suite mfp = {
+	.name = "mac80211-mfp",
+	.test_cases = mfp_test_cases,
+};
+
+kunit_test_suite(mfp);
diff --git a/net/mac80211/tests/module.c b/net/mac80211/tests/module.c
new file mode 100644
index 000000000..9d05f2943
--- /dev/null
+++ b/net/mac80211/tests/module.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This is just module boilerplate for the mac80211 kunit module.
+ *
+ * Copyright (C) 2023 Intel Corporation
+ */
+#include <linux/module.h>
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("tests for mac80211");
diff --git a/net/mac80211/tests/s1g_tim.c b/net/mac80211/tests/s1g_tim.c
new file mode 100644
index 000000000..642fa4ece
--- /dev/null
+++ b/net/mac80211/tests/s1g_tim.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for S1G TIM PVB decoding. This test suite covers
+ * IEEE80211-2024 Annex L figures 8, 9, 10, 12, 13, 14. ADE mode
+ * is not covered as it is an optional encoding format and is not
+ * currently supported by mac80211.
+ *
+ * Copyright (C) 2025 Morse Micro
+ */
+#include <linux/ieee80211.h>
+#include <kunit/test.h>
+#include <kunit/test-bug.h>
+
+#define MAX_AID 128
+
+#define BC(enc_mode, inverse, blk_off)                          \
+	((((blk_off) & 0x1f) << 3) | ((inverse) ? BIT(2) : 0) | \
+	 ((enc_mode) & 0x3))
+
+static void byte_to_bitstr(u8 v, char *out)
+{
+	for (int b = 7; b >= 0; b--)
+		*out++ = (v & BIT(b)) ? '1' : '0';
+	*out = '\0';
+}
+
+static void dump_tim_bits(struct kunit *test,
+			  const struct ieee80211_tim_ie *tim, u8 tim_len)
+{
+	const u8 *ptr = tim->virtual_map;
+	const u8 *end = (const u8 *)tim + tim_len;
+	unsigned int oct = 1;
+	unsigned int blk = 0;
+	char bits[9];
+
+	while (ptr < end) {
+		u8 ctrl = *ptr++;
+		u8 mode = ctrl & 0x03;
+		bool inverse = ctrl & BIT(2);
+		u8 blk_off = ctrl >> 3;
+
+		kunit_info(
+			test, "Block %u (ENC=%s, blk_off=%u, inverse=%u)", blk,
+			(mode == IEEE80211_S1G_TIM_ENC_MODE_BLOCK)  ? "BLOCK" :
+			(mode == IEEE80211_S1G_TIM_ENC_MODE_SINGLE) ? "SINGLE" :
+								      "OLB",
+			blk_off, inverse);
+
+		byte_to_bitstr(ctrl, bits);
+		kunit_info(test, "  octet %2u (ctrl)    : %s (0x%02x)", oct,
+			   bits, ctrl);
+		++oct;
+
+		switch (mode) {
+		case IEEE80211_S1G_TIM_ENC_MODE_BLOCK: {
+			u8 blkmap = *ptr++;
+
+			byte_to_bitstr(blkmap, bits);
+			kunit_info(test, "  octet %2u (blk-map) : %s (0x%02x)",
+				   oct, bits, blkmap);
+			++oct;
+
+			for (u8 sb = 0; sb < 8; sb++) {
+				if (!(blkmap & BIT(sb)))
+					continue;
+				u8 sub = *ptr++;
+
+				byte_to_bitstr(sub, bits);
+				kunit_info(
+					test,
+					"  octet %2u (SB %2u)   : %s (0x%02x)",
+					oct, sb, bits, sub);
+				++oct;
+			}
+			break;
+		}
+		case IEEE80211_S1G_TIM_ENC_MODE_SINGLE: {
+			u8 single = *ptr++;
+
+			byte_to_bitstr(single, bits);
+			kunit_info(test, "  octet %2u (single)  : %s (0x%02x)",
+				   oct, bits, single);
+			++oct;
+			break;
+		}
+		case IEEE80211_S1G_TIM_ENC_MODE_OLB: {
+			u8 len = *ptr++;
+
+			byte_to_bitstr(len, bits);
+			kunit_info(test, "  octet %2u (len=%2u)  : %s (0x%02x)",
+				   oct, len, bits, len);
+			++oct;
+
+			for (u8 i = 0; i < len && ptr < end; i++) {
+				u8 sub = *ptr++;
+
+				byte_to_bitstr(sub, bits);
+				kunit_info(
+					test,
+					"  octet %2u (SB %2u)   : %s (0x%02x)",
+					oct, i, bits, sub);
+				++oct;
+			}
+			break;
+		}
+		default:
+			kunit_info(test, "  ** unknown encoding 0x%x **", mode);
+			return;
+		}
+		blk++;
+	}
+}
+
+static void tim_push(u8 **p, u8 v)
+{
+	*(*p)++ = v;
+}
+
+static void tim_begin(struct ieee80211_tim_ie *tim, u8 **p)
+{
+	tim->dtim_count = 0;
+	tim->dtim_period = 1;
+	tim->bitmap_ctrl = 0;
+	*p = tim->virtual_map;
+}
+
+static u8 tim_end(struct ieee80211_tim_ie *tim, u8 *tail)
+{
+	return tail - (u8 *)tim;
+}
+
+static void pvb_add_block_bitmap(u8 **p, u8 blk_off, bool inverse, u8 blk_bmap,
+				 const u8 *subblocks)
+{
+	u8 enc = IEEE80211_S1G_TIM_ENC_MODE_BLOCK;
+	u8 n = hweight8(blk_bmap);
+
+	tim_push(p, BC(enc, inverse, blk_off));
+	tim_push(p, blk_bmap);
+
+	for (u8 i = 0; i < n; i++)
+		tim_push(p, subblocks[i]);
+}
+
+static void pvb_add_single_aid(u8 **p, u8 blk_off, bool inverse, u8 single6)
+{
+	u8 enc = IEEE80211_S1G_TIM_ENC_MODE_SINGLE;
+
+	tim_push(p, BC(enc, inverse, blk_off));
+	tim_push(p, single6 & GENMASK(5, 0));
+}
+
+static void pvb_add_olb(u8 **p, u8 blk_off, bool inverse, const u8 *subblocks,
+			u8 len)
+{
+	u8 enc = IEEE80211_S1G_TIM_ENC_MODE_OLB;
+
+	tim_push(p, BC(enc, inverse, blk_off));
+	tim_push(p, len);
+	for (u8 i = 0; i < len; i++)
+		tim_push(p, subblocks[i]);
+}
+
+static void check_all_aids(struct kunit *test,
+			   const struct ieee80211_tim_ie *tim, u8 tim_len,
+			   const unsigned long *expected)
+{
+	for (u16 aid = 1; aid <= MAX_AID; aid++) {
+		bool want = test_bit(aid, expected);
+		bool got = ieee80211_s1g_check_tim(tim, tim_len, aid);
+
+		KUNIT_ASSERT_EQ_MSG(test, got, want,
+				    "AID %u mismatch (got=%d want=%d)", aid,
+				    got, want);
+	}
+}
+
+static void fill_bitmap(unsigned long *bm, const u16 *list, size_t n)
+{
+	size_t i;
+
+	bitmap_zero(bm, MAX_AID + 1);
+	for (i = 0; i < n; i++)
+		__set_bit(list[i], bm);
+}
+
+static void fill_bitmap_inverse(unsigned long *bm, u16 max_aid,
+				const u16 *except, size_t n_except)
+{
+	bitmap_zero(bm, MAX_AID + 1);
+	for (u16 aid = 1; aid <= max_aid; aid++)
+		__set_bit(aid, bm);
+
+	for (size_t i = 0; i < n_except; i++)
+		if (except[i] <= max_aid)
+			__clear_bit(except[i], bm);
+}
+
+static void s1g_tim_block_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	static const u8 subblocks[] = {
+		0x42, /* SB m=0: AIDs 1,6 */
+		0xA0, /* SB m=2: AIDs 21,23 */
+	};
+	u8 blk_bmap = 0x05; /* bits 0 and 2 set */
+	bool inverse = false;
+	static const u16 set_list[] = { 1, 6, 21, 23 };
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_block_bitmap(&p, 0, inverse, blk_bmap, subblocks);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap(exp, set_list, ARRAY_SIZE(set_list));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static void s1g_tim_single_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	bool inverse = false;
+	u8 blk_off = 0;
+	u8 single6 = 0x1f; /* 31 */
+	static const u16 set_list[] = { 31 };
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_single_aid(&p, blk_off, inverse, single6);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap(exp, set_list, ARRAY_SIZE(set_list));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static void s1g_tim_olb_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	bool inverse = false;
+	u8 blk_off = 0;
+	static const u16 set_list[] = { 1,  6,	13, 15, 17, 22, 29, 31, 33,
+					38, 45, 47, 49, 54, 61, 63, 65, 70 };
+	static const u8 subblocks[] = { 0x42, 0xA0, 0x42, 0xA0, 0x42,
+					0xA0, 0x42, 0xA0, 0x42 };
+	u8 len = ARRAY_SIZE(subblocks);
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_olb(&p, blk_off, inverse, subblocks, len);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap(exp, set_list, ARRAY_SIZE(set_list));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static void s1g_tim_inverse_block_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	/* Same sub-block content as Figure L-8, but inverse = true */
+	static const u8 subblocks[] = {
+		0x42, /* SB m=0: AIDs 1,6 */
+		0xA0, /* SB m=2: AIDs 21,23 */
+	};
+	u8 blk_bmap = 0x05;
+	bool inverse = true;
+	/*  All AIDs except 1,6,21,23 are set */
+	static const u16 except[] = { 1, 6, 21, 23 };
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_block_bitmap(&p, 0, inverse, blk_bmap, subblocks);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap_inverse(exp, 63, except, ARRAY_SIZE(except));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static void s1g_tim_inverse_single_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	bool inverse = true;
+	u8 blk_off = 0;
+	u8 single6 = 0x1f; /* 31 */
+	/*  All AIDs except 31 are set */
+	static const u16 except[] = { 31 };
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_single_aid(&p, blk_off, inverse, single6);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap_inverse(exp, 63, except, ARRAY_SIZE(except));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static void s1g_tim_inverse_olb_test(struct kunit *test)
+{
+	u8 buf[256] = {};
+	struct ieee80211_tim_ie *tim = (void *)buf;
+	u8 *p, tim_len;
+	bool inverse = true;
+	u8 blk_off = 0, len;
+	/*  All AIDs except the list below are set */
+	static const u16 except[] = { 1,  6,  13, 15, 17, 22, 29, 31, 33,
+				      38, 45, 47, 49, 54, 61, 63, 65, 70 };
+	static const u8 subblocks[] = { 0x42, 0xA0, 0x42, 0xA0, 0x42,
+					0xA0, 0x42, 0xA0, 0x42 };
+	len = ARRAY_SIZE(subblocks);
+	DECLARE_BITMAP(exp, MAX_AID + 1);
+
+	tim_begin(tim, &p);
+	pvb_add_olb(&p, blk_off, inverse, subblocks, len);
+	tim_len = tim_end(tim, p);
+
+	fill_bitmap_inverse(exp, 127, except, ARRAY_SIZE(except));
+
+	dump_tim_bits(test, tim, tim_len);
+	check_all_aids(test, tim, tim_len, exp);
+}
+
+static struct kunit_case s1g_tim_test_cases[] = {
+	KUNIT_CASE(s1g_tim_block_test),
+	KUNIT_CASE(s1g_tim_single_test),
+	KUNIT_CASE(s1g_tim_olb_test),
+	KUNIT_CASE(s1g_tim_inverse_block_test),
+	KUNIT_CASE(s1g_tim_inverse_single_test),
+	KUNIT_CASE(s1g_tim_inverse_olb_test),
+	{}
+};
+
+static struct kunit_suite s1g_tim = {
+	.name = "mac80211-s1g-tim",
+	.test_cases = s1g_tim_test_cases,
+};
+
+kunit_test_suite(s1g_tim);
diff --git a/net/mac80211/tests/tpe.c b/net/mac80211/tests/tpe.c
new file mode 100644
index 000000000..c73b6c66b
--- /dev/null
+++ b/net/mac80211/tests/tpe.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for TPE element handling
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+#include <kunit/test.h>
+#include "../ieee80211_i.h"
+
+MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING");
+
+static struct ieee80211_channel chan6g_1 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 5955,
+};
+
+static struct ieee80211_channel chan6g_33 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 6115,
+};
+
+static struct ieee80211_channel chan6g_61 = {
+	.band = NL80211_BAND_6GHZ,
+	.center_freq = 6255,
+};
+
+static const struct subchan_test_case {
+	const char *desc;
+	struct cfg80211_chan_def c;
+	u8 n;
+	int expect;
+} subchan_offset_cases[] = {
+	{
+		.desc = "identical 20 MHz",
+		.c.width = NL80211_CHAN_WIDTH_20,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5955,
+		.n = 1,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 40 MHz",
+		.c.width = NL80211_CHAN_WIDTH_40,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5965,
+		.n = 2,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5985,
+		.c.center_freq2 = 6225,
+		.n = 16,
+		.expect = 0,
+	},
+	{
+		.desc = "identical 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 6105,
+		.n = 16,
+		.expect = 0,
+	},
+	{
+		.desc = "lower 160 MHz of 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 6105,
+		.n = 8,
+		.expect = 0,
+	},
+	{
+		.desc = "upper 160 MHz of 320 MHz",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6105,
+		.n = 8,
+		.expect = 8,
+	},
+	{
+		.desc = "upper 160 MHz of 320 MHz, go to 40",
+		.c.width = NL80211_CHAN_WIDTH_320,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6105,
+		.n = 2,
+		.expect = 8 + 4 + 2,
+	},
+	{
+		.desc = "secondary 80 above primary in 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_1,
+		.c.center_freq1 = 5985,
+		.c.center_freq2 = 6225,
+		.n = 4,
+		.expect = 0,
+	},
+	{
+		.desc = "secondary 80 below primary in 80+80 MHz",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6225,
+		.c.center_freq2 = 5985,
+		.n = 4,
+		.expect = 4,
+	},
+	{
+		.desc = "secondary 80 below primary in 80+80 MHz, go to 20",
+		/* not really is valid? doesn't matter for the test */
+		.c.width = NL80211_CHAN_WIDTH_80P80,
+		.c.chan = &chan6g_61,
+		.c.center_freq1 = 6225,
+		.c.center_freq2 = 5985,
+		.n = 1,
+		.expect = 7,
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(subchan_offset, subchan_offset_cases, desc);
+
+static void subchan_offset(struct kunit *test)
+{
+	const struct subchan_test_case *params = test->param_value;
+	int offset;
+
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->c), true);
+
+	offset = ieee80211_calc_chandef_subchan_offset(&params->c, params->n);
+
+	KUNIT_EXPECT_EQ(test, params->expect, offset);
+}
+
+static const struct psd_reorder_test_case {
+	const char *desc;
+	struct cfg80211_chan_def ap, used;
+	struct ieee80211_parsed_tpe_psd psd, out;
+} psd_reorder_cases[] = {
+	{
+		.desc = "no changes, 320 MHz",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_320,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6105,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 8,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 16,
+		.out.n = 8,
+		.out.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+	},
+	{
+		.desc = "no changes, 320 MHz, 160 MHz used, n=0",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6025,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 0,
+		.psd.power = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 0,
+		.out.power = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, },
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, all lower",
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_1,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_1,
+		.used.center_freq1 = 6025,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 0, 1, 2, 3, 4, 5, 6, 7, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, all upper",
+		/*
+		 * EHT: | | | | | | | | | | | | | | | | |
+		 * HE:                          | | | | |
+		 * used:                | | | | | | | | |
+		 */
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_61,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_61,
+		.used.center_freq1 = 6185,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 12, 13, 14, 15, 0, 1, 2, 3, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+	{
+		.desc = "320 MHz, HE is 80, used 160, split",
+		/*
+		 * EHT: | | | | | | | | | | | | | | | | |
+		 * HE:                  | | | | |
+		 * used:                | | | | | | | | |
+		 */
+
+		.ap.width = NL80211_CHAN_WIDTH_320,
+		.ap.chan = &chan6g_33,
+		.ap.center_freq1 = 6105,
+
+		.used.width = NL80211_CHAN_WIDTH_160,
+		.used.chan = &chan6g_33,
+		.used.center_freq1 = 6185,
+
+		.psd.valid = true,
+		.psd.count = 16,
+		.psd.n = 4,
+		.psd.power = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
+
+		.out.valid = true,
+		.out.count = 8,
+		.out.n = 4,
+		.out.power = { 0, 1, 2, 3, 12, 13, 14, 15, 127, 127, 127, 127, 127, 127, 127, 127},
+	},
+};
+
+KUNIT_ARRAY_PARAM_DESC(psd_reorder, psd_reorder_cases, desc);
+
+static void psd_reorder(struct kunit *test)
+{
+	const struct psd_reorder_test_case *params = test->param_value;
+	struct ieee80211_parsed_tpe_psd tmp = params->psd;
+
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->ap), true);
+	KUNIT_ASSERT_EQ(test, cfg80211_chandef_valid(&params->used), true);
+
+	ieee80211_rearrange_tpe_psd(&tmp, &params->ap, &params->used);
+	KUNIT_EXPECT_MEMEQ(test, &tmp, &params->out, sizeof(tmp));
+}
+
+static struct kunit_case tpe_test_cases[] = {
+	KUNIT_CASE_PARAM(subchan_offset, subchan_offset_gen_params),
+	KUNIT_CASE_PARAM(psd_reorder, psd_reorder_gen_params),
+	{}
+};
+
+static struct kunit_suite tpe = {
+	.name = "mac80211-tpe",
+	.test_cases = tpe_test_cases,
+};
+
+kunit_test_suite(tpe);
diff --git a/net/mac80211/tests/ttlm.c b/net/mac80211/tests/ttlm.c
new file mode 100644
index 000000000..18d0592b1
--- /dev/null
+++ b/net/mac80211/tests/ttlm.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KUnit tests for negotiated TTLM (TID-To-Link Mapping) parsing
+ *
+ * Copyright (C) 2026 Michael Bommarito <michael.bommarito@gmail.com>
+ */
+#include <kunit/test.h>
+#include <linux/ieee80211.h>
+#include "../ieee80211_i.h"
+
+MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING");
+
+/*
+ * Build a negotiated TTLM element in caller-supplied buffer.
+ *
+ * @buf:       destination buffer (must be at least elem_size bytes)
+ * @elem_size: sizeof(ttlm_elem) + 1 (presence byte) + npresent * bm_size
+ * @presence:  link_map_presence bitmask; each set bit => one map follows
+ * @bm_size:   bytes per map (1 or 2); 2 => LINK_MAP_SIZE bit clear
+ * @maps:      array of npresent u16 maps, one per set bit in presence
+ *
+ * Control field encodes direction=BOTH; no switch-time, no expected-dur,
+ * no DEF_LINK_MAP.  LINK_MAP_SIZE bit is set iff bm_size==1.
+ *
+ * Returns pointer to the ieee80211_ttlm_elem at buf.
+ */
+static const struct ieee80211_ttlm_elem *
+build_neg_ttlm_elem(u8 *buf, size_t elem_size,
+		    u8 presence, u8 bm_size, const u16 *maps)
+{
+	struct ieee80211_ttlm_elem *t = (void *)buf;
+	u8 control;
+	u8 *pos;
+	int i, tid;
+
+	memset(buf, 0, elem_size);
+
+	control = IEEE80211_TTLM_DIRECTION_BOTH; /* bits [1:0] = 2 */
+	if (bm_size == 1)
+		control |= IEEE80211_TTLM_CONTROL_LINK_MAP_SIZE;
+
+	t->control = control;
+
+	pos = (u8 *)t->optional;
+	*pos++ = presence;
+
+	i = 0;
+	for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) {
+		if (!(presence & BIT(tid)))
+			continue;
+		if (bm_size == 1)
+			*pos = (u8)maps[i];
+		else
+			put_unaligned_le16(maps[i], pos);
+		pos += bm_size;
+		i++;
+	}
+
+	return t;
+}
+
+/*
+ * sparse_presence_no_oob_read - BIT(0)|BIT(7) presence, bm_size=2
+ *
+ * Only TID 0 and TID 7 have maps; TIDs 1-6 are absent.  Element length
+ * is exactly 6 bytes (1 control + 1 presence + 2 * 2-byte maps).
+ *
+ * Pre-fix the parser advanced pos by bm_size AFTER the switch() block
+ * (i.e. unconditionally for every TID), so when processing TID 7 it
+ * had already advanced 6 * bm_size = 12 bytes past the presence byte
+ * for the absent TIDs before reading the TID-7 map - 14 bytes past the
+ * end of the 2-byte TID-7 map.  Under KASAN that is a slab-out-of-bounds.
+ *
+ * After the fix pos is advanced only inside the presence-bit branch so
+ * the cursor lands exactly at end-of-element after processing TID 7.
+ */
+static void sparse_presence_no_oob_read(struct kunit *test)
+{
+	/*
+	 * presence = BIT(0)|BIT(7): 2 maps present.
+	 * elem_size = sizeof(ttlm_elem) + 1 (presence) + 2*2 (maps) = 6.
+	 */
+	const u8 presence = BIT(0) | BIT(7);
+	const u8 bm_size = 2;
+	const int npresent = 2;
+	const size_t elem_size = sizeof(struct ieee80211_ttlm_elem)
+				 + 1 + npresent * bm_size;
+	/*
+	 * Allocate exact-size buffer so a pre-fix OOB read walks into the
+	 * KASAN red zone immediately after the allocation.
+	 */
+	u8 *buf = kunit_kzalloc(test, elem_size, GFP_KERNEL);
+	const struct ieee80211_ttlm_elem *ttlm;
+	struct ieee80211_neg_ttlm neg_ttlm = {};
+	/* Non-zero maps so the parser does not reject with -EINVAL. */
+	const u16 maps[2] = { 0x0001, 0x0001 };
+	u8 direction = 0;
+	int ret;
+
+	KUNIT_ASSERT_NOT_NULL(test, buf);
+
+	ttlm = build_neg_ttlm_elem(buf, elem_size, presence, bm_size, maps);
+
+	/*
+	 * Pass NULL for sdata: the only sdata dereference in this code path
+	 * is inside mlme_dbg() on error returns, which are guarded by
+	 * MAC80211_MLME_DEBUG == 0 in non-debug builds and by the dead-code
+	 * eliminator in KUnit builds.  The success path does not touch sdata.
+	 */
+	ret = ieee80211_parse_neg_ttlm(NULL, ttlm, &neg_ttlm, &direction);
+
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, (int)direction, IEEE80211_TTLM_DIRECTION_BOTH);
+	/* TID 0: map present */
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.downlink[0], 0x0001);
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.uplink[0],   0x0001);
+	/* TID 3: absent => map should be 0 */
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.downlink[3], 0);
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.uplink[3],   0);
+	/* TID 7: map present */
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.downlink[7], 0x0001);
+	KUNIT_EXPECT_EQ(test, (int)neg_ttlm.uplink[7],   0x0001);
+}
+
+/*
+ * dense_presence_baseline - presence=0xff (all 8 TIDs), bm_size=2
+ *
+ * Every TID has a map; this is the dense layout the parser handled
+ * correctly even before the fix.  Confirms the cursor-advance fix
+ * does not regress the already-correct path.
+ */
+static void dense_presence_baseline(struct kunit *test)
+{
+	const u8 presence = 0xff;
+	const u8 bm_size = 2;
+	const int npresent = 8;
+	const size_t elem_size = sizeof(struct ieee80211_ttlm_elem)
+				 + 1 + npresent * bm_size;
+	u8 *buf = kunit_kzalloc(test, elem_size, GFP_KERNEL);
+	const struct ieee80211_ttlm_elem *ttlm;
+	struct ieee80211_neg_ttlm neg_ttlm = {};
+	const u16 maps[8] = {
+		0x0003, 0x0003, 0x0003, 0x0003,
+		0x0003, 0x0003, 0x0003, 0x0003,
+	};
+	u8 direction = 0;
+	int ret;
+
+	KUNIT_ASSERT_NOT_NULL(test, buf);
+
+	ttlm = build_neg_ttlm_elem(buf, elem_size, presence, bm_size, maps);
+
+	ret = ieee80211_parse_neg_ttlm(NULL, ttlm, &neg_ttlm, &direction);
+
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, (int)direction, IEEE80211_TTLM_DIRECTION_BOTH);
+	/* All TIDs present: every downlink/uplink entry must be 0x0003. */
+	for (int tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) {
+		KUNIT_EXPECT_EQ(test, (int)neg_ttlm.downlink[tid], 0x0003);
+		KUNIT_EXPECT_EQ(test, (int)neg_ttlm.uplink[tid],   0x0003);
+	}
+}
+
+static struct kunit_case mac80211_ttlm_test_cases[] = {
+	KUNIT_CASE(sparse_presence_no_oob_read),
+	KUNIT_CASE(dense_presence_baseline),
+	{}
+};
+
+static struct kunit_suite mac80211_ttlm = {
+	.name = "mac80211-ttlm",
+	.test_cases = mac80211_ttlm_test_cases,
+};
+
+kunit_test_suite(mac80211_ttlm);
diff --git a/net/mac80211/tests/util.c b/net/mac80211/tests/util.c
new file mode 100644
index 000000000..0b01264af
--- /dev/null
+++ b/net/mac80211/tests/util.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Utilities for mac80211 unit testing
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+#include <linux/ieee80211.h>
+#include <net/mac80211.h>
+#include <kunit/test.h>
+#include <kunit/test-bug.h>
+#include "util.h"
+
+#define CHAN2G(_freq)  { \
+	.band = NL80211_BAND_2GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_freq), \
+}
+
+static const struct ieee80211_channel channels_2ghz[] = {
+	CHAN2G(2412), /* Channel 1 */
+	CHAN2G(2417), /* Channel 2 */
+	CHAN2G(2422), /* Channel 3 */
+	CHAN2G(2427), /* Channel 4 */
+	CHAN2G(2432), /* Channel 5 */
+	CHAN2G(2437), /* Channel 6 */
+	CHAN2G(2442), /* Channel 7 */
+	CHAN2G(2447), /* Channel 8 */
+	CHAN2G(2452), /* Channel 9 */
+	CHAN2G(2457), /* Channel 10 */
+	CHAN2G(2462), /* Channel 11 */
+	CHAN2G(2467), /* Channel 12 */
+	CHAN2G(2472), /* Channel 13 */
+	CHAN2G(2484), /* Channel 14 */
+};
+
+#define CHAN5G(_freq) { \
+	.band = NL80211_BAND_5GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_freq), \
+}
+
+static const struct ieee80211_channel channels_5ghz[] = {
+	CHAN5G(5180), /* Channel 36 */
+	CHAN5G(5200), /* Channel 40 */
+	CHAN5G(5220), /* Channel 44 */
+	CHAN5G(5240), /* Channel 48 */
+};
+
+static const struct ieee80211_rate bitrates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60 },
+	{ .bitrate = 90 },
+	{ .bitrate = 120 },
+	{ .bitrate = 180 },
+	{ .bitrate = 240 },
+	{ .bitrate = 360 },
+	{ .bitrate = 480 },
+	{ .bitrate = 540 }
+};
+
+/* Copied from hwsim except that it only supports 4 EHT streams and STA/P2P mode */
+static const struct ieee80211_sband_iftype_data sband_capa_5ghz[] = {
+	{
+		.types_mask = BIT(NL80211_IFTYPE_STATION) |
+			      BIT(NL80211_IFTYPE_P2P_CLIENT),
+		.he_cap = {
+			.has_he = true,
+			.he_cap_elem = {
+				.mac_cap_info[0] =
+					IEEE80211_HE_MAC_CAP0_HTC_HE,
+				.mac_cap_info[1] =
+					IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+					IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+				.mac_cap_info[2] =
+					IEEE80211_HE_MAC_CAP2_BSR |
+					IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+					IEEE80211_HE_MAC_CAP2_ACK_EN,
+				.mac_cap_info[3] =
+					IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+					IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3,
+				.mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU,
+				.phy_cap_info[0] =
+					IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+					IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+					IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+				.phy_cap_info[1] =
+					IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+					IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+					IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+					IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+				.phy_cap_info[2] =
+					IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+					IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+					IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+					IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+					IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+				/* Leave all the other PHY capability bytes
+				 * unset, as DCM, beam forming, RU and PPE
+				 * threshold information are not supported
+				 */
+			},
+			.he_mcs_nss_supp = {
+				.rx_mcs_80 = cpu_to_le16(0xfffa),
+				.tx_mcs_80 = cpu_to_le16(0xfffa),
+				.rx_mcs_160 = cpu_to_le16(0xfffa),
+				.tx_mcs_160 = cpu_to_le16(0xfffa),
+				.rx_mcs_80p80 = cpu_to_le16(0xfffa),
+				.tx_mcs_80p80 = cpu_to_le16(0xfffa),
+			},
+		},
+		.eht_cap = {
+			.has_eht = true,
+			.eht_cap_elem = {
+				.mac_cap_info[0] =
+					IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS |
+					IEEE80211_EHT_MAC_CAP0_OM_CONTROL |
+					IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1,
+				.phy_cap_info[0] =
+					IEEE80211_EHT_PHY_CAP0_242_TONE_RU_GT20MHZ |
+					IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI |
+					IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO |
+					IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER |
+					IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE |
+					IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK,
+				.phy_cap_info[1] =
+					IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_80MHZ_MASK |
+					IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK,
+				.phy_cap_info[2] =
+					IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK |
+					IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK,
+				.phy_cap_info[3] =
+					IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK |
+					IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK |
+					IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK |
+					IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK |
+					IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK |
+					IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK |
+					IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK,
+				.phy_cap_info[4] =
+					IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO |
+					IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP |
+					IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP |
+					IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI |
+					IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK,
+				.phy_cap_info[5] =
+					IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK |
+					IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP |
+					IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP |
+					IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT |
+					IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK |
+					IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK,
+				.phy_cap_info[6] =
+					IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK |
+					IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK,
+				.phy_cap_info[7] =
+					IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW |
+					IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ |
+					IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ |
+					IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ |
+					IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ,
+			},
+
+			/* For all MCS and bandwidth, set 4 NSS for both Tx and
+			 * Rx
+			 */
+			.eht_mcs_nss_supp = {
+				/*
+				 * As B1 and B2 are set in the supported
+				 * channel width set field in the HE PHY
+				 * capabilities information field include all
+				 * the following MCS/NSS.
+				 */
+				.bw._80 = {
+					.rx_tx_mcs9_max_nss = 0x44,
+					.rx_tx_mcs11_max_nss = 0x44,
+					.rx_tx_mcs13_max_nss = 0x44,
+				},
+				.bw._160 = {
+					.rx_tx_mcs9_max_nss = 0x44,
+					.rx_tx_mcs11_max_nss = 0x44,
+					.rx_tx_mcs13_max_nss = 0x44,
+				},
+			},
+			/* PPE threshold information is not supported */
+		},
+	},
+};
+
+int t_sdata_init(struct kunit_resource *resource, void *ctx)
+{
+	struct kunit *test = kunit_get_current_test();
+	struct t_sdata *t_sdata;
+
+	t_sdata = kzalloc_obj(*t_sdata);
+	KUNIT_ASSERT_NOT_NULL(test, t_sdata);
+
+	resource->data = t_sdata;
+	resource->name = "sdata";
+
+	t_sdata->sdata = kzalloc_obj(*t_sdata->sdata);
+	KUNIT_ASSERT_NOT_NULL(test, t_sdata->sdata);
+
+	t_sdata->wiphy = kzalloc_obj(*t_sdata->wiphy);
+	KUNIT_ASSERT_NOT_NULL(test, t_sdata->wiphy);
+
+	strscpy(t_sdata->sdata->name, "kunit");
+
+	t_sdata->sdata->local = &t_sdata->local;
+	t_sdata->sdata->local->hw.wiphy = t_sdata->wiphy;
+	t_sdata->sdata->wdev.wiphy = t_sdata->wiphy;
+	t_sdata->sdata->vif.type = NL80211_IFTYPE_STATION;
+
+	t_sdata->sdata->deflink.sdata = t_sdata->sdata;
+	t_sdata->sdata->deflink.link_id = 0;
+
+	t_sdata->wiphy->bands[NL80211_BAND_2GHZ] = &t_sdata->band_2ghz;
+	t_sdata->wiphy->bands[NL80211_BAND_5GHZ] = &t_sdata->band_5ghz;
+
+	for (int band = NL80211_BAND_2GHZ; band <= NL80211_BAND_5GHZ; band++) {
+		struct ieee80211_supported_band *sband;
+
+		sband = t_sdata->wiphy->bands[band];
+		sband->band = band;
+
+		sband->bitrates =
+			kmemdup(bitrates, sizeof(bitrates), GFP_KERNEL);
+		sband->n_bitrates = ARRAY_SIZE(bitrates);
+
+		/* Initialize channels, feel free to add more channels/bands */
+		switch (band) {
+		case NL80211_BAND_2GHZ:
+			sband->channels = kmemdup(channels_2ghz,
+						  sizeof(channels_2ghz),
+						  GFP_KERNEL);
+			sband->n_channels = ARRAY_SIZE(channels_2ghz);
+			sband->bitrates = kmemdup(bitrates,
+						  sizeof(bitrates),
+						  GFP_KERNEL);
+			sband->n_bitrates = ARRAY_SIZE(bitrates);
+			break;
+		case NL80211_BAND_5GHZ:
+			sband->channels = kmemdup(channels_5ghz,
+						  sizeof(channels_5ghz),
+						  GFP_KERNEL);
+			sband->n_channels = ARRAY_SIZE(channels_5ghz);
+			sband->bitrates = kmemdup(bitrates,
+						  sizeof(bitrates),
+						  GFP_KERNEL);
+			sband->n_bitrates = ARRAY_SIZE(bitrates);
+
+			sband->vht_cap.vht_supported = true;
+			sband->vht_cap.cap =
+				IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
+				IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ |
+				IEEE80211_VHT_CAP_RXLDPC |
+				IEEE80211_VHT_CAP_SHORT_GI_80 |
+				IEEE80211_VHT_CAP_SHORT_GI_160 |
+				IEEE80211_VHT_CAP_TXSTBC |
+				IEEE80211_VHT_CAP_RXSTBC_4 |
+				IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+			sband->vht_cap.vht_mcs.rx_mcs_map =
+				cpu_to_le16(IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
+					    IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 |
+					    IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 |
+					    IEEE80211_VHT_MCS_SUPPORT_0_9 << 6);
+			sband->vht_cap.vht_mcs.tx_mcs_map =
+				sband->vht_cap.vht_mcs.rx_mcs_map;
+			break;
+		default:
+			continue;
+		}
+
+		sband->ht_cap.ht_supported = band != NL80211_BAND_6GHZ;
+		sband->ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+					IEEE80211_HT_CAP_GRN_FLD |
+					IEEE80211_HT_CAP_SGI_20 |
+					IEEE80211_HT_CAP_SGI_40 |
+					IEEE80211_HT_CAP_DSSSCCK40;
+		sband->ht_cap.ampdu_factor = 0x3;
+		sband->ht_cap.ampdu_density = 0x6;
+		memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs));
+		sband->ht_cap.mcs.rx_mask[0] = 0xff;
+		sband->ht_cap.mcs.rx_mask[1] = 0xff;
+		sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+	}
+
+	ieee80211_set_sband_iftype_data(&t_sdata->band_5ghz, sband_capa_5ghz);
+
+	return 0;
+}
+
+void t_sdata_exit(struct kunit_resource *resource)
+{
+	struct t_sdata *t_sdata = resource->data;
+
+	kfree(t_sdata->band_2ghz.channels);
+	kfree(t_sdata->band_2ghz.bitrates);
+	kfree(t_sdata->band_5ghz.channels);
+	kfree(t_sdata->band_5ghz.bitrates);
+
+	kfree(t_sdata->sdata);
+	kfree(t_sdata->wiphy);
+
+	kfree(t_sdata);
+}
diff --git a/net/mac80211/tests/util.h b/net/mac80211/tests/util.h
new file mode 100644
index 000000000..6615880c1
--- /dev/null
+++ b/net/mac80211/tests/util.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Utilities for mac80211 unit testing
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+#ifndef __MAC80211_UTILS_H
+#define __MAC80211_UTILS_H
+
+#include "../ieee80211_i.h"
+
+struct t_sdata {
+	struct ieee80211_sub_if_data *sdata;
+	struct wiphy *wiphy;
+	struct ieee80211_local local;
+
+	void *ctx;
+
+	struct ieee80211_supported_band band_2ghz;
+	struct ieee80211_supported_band band_5ghz;
+};
+
+#define T_SDATA(test) ({						\
+		struct t_sdata *__t_sdata =				\
+			kunit_alloc_resource(test, t_sdata_init,	\
+					     t_sdata_exit,		\
+					     GFP_KERNEL, NULL);		\
+									\
+		KUNIT_ASSERT_NOT_NULL(test, __t_sdata);			\
+		__t_sdata;						\
+	})
+
+int t_sdata_init(struct kunit_resource *resource, void *data);
+void t_sdata_exit(struct kunit_resource *resource);
+
+#endif /* __MAC80211_UTILS_H */