diff options
| author | Muhammad Bilal <meatuni001@gmail.com> | 2026-07-28 17:54:55 +0500 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2026-09-01 12:15:16 +0200 |
| commit | ff917923f4fb9c83717ba135ee47d7e4c1567bb7 (patch) | |
| tree | c38fd8fcf58e1937b17fdbc6518b6f8b797fc15a /net/mac80211/pm.c | |
| download | linux-stable-ff917923f4fb9c83717ba135ee47d7e4c1567bb7.tar.gz linux-stable-ff917923f4fb9c83717ba135ee47d7e4c1567bb7.zip | |
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced.
Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'net/mac80211/pm.c')
| -rw-r--r-- | net/mac80211/pm.c | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c new file mode 100644 index 000000000..5a508d99e --- /dev/null +++ b/net/mac80211/pm.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Portions + * Copyright (C) 2020-2021, 2023-2024 Intel Corporation + */ +#include <net/mac80211.h> +#include <net/rtnetlink.h> + +#include "ieee80211_i.h" +#include "mesh.h" +#include "driver-ops.h" +#include "led.h" + +static void ieee80211_sched_scan_cancel(struct ieee80211_local *local) +{ + if (ieee80211_request_sched_scan_stop(local)) + return; + cfg80211_sched_scan_stopped_locked(local->hw.wiphy, 0); +} + +int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_sub_if_data *sdata; + struct sta_info *sta; + + if (!local->open_count) + goto suspend; + + local->suspending = true; + mb(); /* make suspending visible before any cancellation */ + + ieee80211_scan_cancel(local); + + ieee80211_dfs_cac_cancel(local, NULL); + + ieee80211_roc_purge(local, NULL); + + ieee80211_del_virtual_monitor(local); + + if (ieee80211_hw_check(hw, AMPDU_AGGREGATION) && + !(wowlan && wowlan->any)) { + lockdep_assert_wiphy(local->hw.wiphy); + list_for_each_entry(sta, &local->sta_list, list) { + set_sta_flag(sta, WLAN_STA_BLOCK_BA); + ieee80211_sta_tear_down_BA_sessions( + sta, AGG_STOP_LOCAL_REQUEST); + } + } + + /* keep sched_scan only in case of 'any' trigger */ + if (!(wowlan && wowlan->any)) + ieee80211_sched_scan_cancel(local); + + ieee80211_stop_queues_by_reason(hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_SUSPEND, + false); + + /* flush out all packets */ + synchronize_net(); + + ieee80211_flush_queues(local, NULL, true); + + local->quiescing = true; + /* make quiescing visible to timers everywhere */ + mb(); + + flush_workqueue(local->workqueue); + + /* Don't try to run timers while suspended. */ + timer_delete_sync(&local->sta_cleanup); + + /* + * Note that this particular timer doesn't need to be + * restarted at resume. + */ + wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work); + timer_delete_sync(&local->dynamic_ps_timer); + + local->wowlan = wowlan; + if (local->wowlan) { + int err; + + /* Drivers don't expect to suspend while some operations like + * authenticating or associating are in progress. It doesn't + * make sense anyway to accept that, since the authentication + * or association would never finish since the driver can't do + * that on its own. + * Thus, clean up in-progress auth/assoc first. + */ + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) + continue; + if (sdata->vif.type != NL80211_IFTYPE_STATION) + continue; + ieee80211_mgd_quiesce(sdata); + /* If suspended during TX in progress, and wowlan + * is enabled (connection will be active) there + * can be a race where the driver is put out + * of power-save due to TX and during suspend + * dynamic_ps_timer is cancelled and TX packet + * is flushed, leaving the driver in ACTIVE even + * after resuming until dynamic_ps_timer puts + * driver back in DOZE. + */ + if (sdata->u.mgd.associated && + sdata->u.mgd.powersave && + !(local->hw.conf.flags & IEEE80211_CONF_PS)) { + local->hw.conf.flags |= IEEE80211_CONF_PS; + ieee80211_hw_config(local, -1, + IEEE80211_CONF_CHANGE_PS); + } + } + + err = drv_suspend(local, wowlan); + if (err < 0) { + local->quiescing = false; + local->wowlan = false; + if (ieee80211_hw_check(hw, AMPDU_AGGREGATION)) { + lockdep_assert_wiphy(local->hw.wiphy); + list_for_each_entry(sta, + &local->sta_list, list) { + clear_sta_flag(sta, WLAN_STA_BLOCK_BA); + } + } + ieee80211_wake_queues_by_reason(hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_SUSPEND, + false); + return err; + } else if (err > 0) { + WARN_ON(err != 1); + /* cfg80211 will call back into mac80211 to disconnect + * all interfaces, allow that to proceed properly + */ + ieee80211_wake_queues_by_reason(hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_SUSPEND, + false); + return err; + } else { + goto suspend; + } + } + + /* remove all interfaces that were created in the driver */ + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) + continue; + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MONITOR: + continue; + case NL80211_IFTYPE_STATION: + ieee80211_mgd_quiesce(sdata); + break; + default: + break; + } + + wiphy_delayed_work_flush(local->hw.wiphy, + &sdata->dec_tailroom_needed_wk); + drv_remove_interface(local, sdata); + } + + /* + * We disconnected on all interfaces before suspend, all channel + * contexts should be released. + */ + WARN_ON(!list_empty(&local->chanctx_list)); + + /* stop hardware - this must stop RX */ + ieee80211_stop_device(local, true); + + suspend: + local->suspended = true; + /* need suspended to be visible before quiescing is false */ + barrier(); + local->quiescing = false; + local->suspending = false; + + return 0; +} + +/* + * __ieee80211_resume() is a static inline which just calls + * ieee80211_reconfig(), which is also needed for hardware + * hang/firmware failure/etc. recovery. + */ + +void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp); +} +EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup); |
