PCI: Add pci_irq_type() to query the allocated interrupt typegrafted

Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX
based on the interrupt type the PCI core selected after
pci_alloc_irq_vectors().

Several drivers already open-code this check against pdev->msix_enabled
and pdev->msi_enabled, or even open code this helper [1].

A common helper avoids the duplication and keeps drivers from accessing
the bitfield directly (see also [2]).

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1]
Inspired-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org
[ Add missing pci_irq_type() stub for CONFIG_PCI=n. ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

1 files changed, 200 insertions, 0 deletions

diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
new file mode 100644
index 000000000..5a508d99e
--- /dev/null
+++ b/net/mac80211/pm.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Portions
+ * Copyright (C) 2020-2021, 2023-2024 Intel Corporation
+ */
+#include <net/mac80211.h>
+#include <net/rtnetlink.h>
+
+#include "ieee80211_i.h"
+#include "mesh.h"
+#include "driver-ops.h"
+#include "led.h"
+
+static void ieee80211_sched_scan_cancel(struct ieee80211_local *local)
+{
+	if (ieee80211_request_sched_scan_stop(local))
+		return;
+	cfg80211_sched_scan_stopped_locked(local->hw.wiphy, 0);
+}
+
+int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
+	struct sta_info *sta;
+
+	if (!local->open_count)
+		goto suspend;
+
+	local->suspending = true;
+	mb(); /* make suspending visible before any cancellation */
+
+	ieee80211_scan_cancel(local);
+
+	ieee80211_dfs_cac_cancel(local, NULL);
+
+	ieee80211_roc_purge(local, NULL);
+
+	ieee80211_del_virtual_monitor(local);
+
+	if (ieee80211_hw_check(hw, AMPDU_AGGREGATION) &&
+	    !(wowlan && wowlan->any)) {
+		lockdep_assert_wiphy(local->hw.wiphy);
+		list_for_each_entry(sta, &local->sta_list, list) {
+			set_sta_flag(sta, WLAN_STA_BLOCK_BA);
+			ieee80211_sta_tear_down_BA_sessions(
+					sta, AGG_STOP_LOCAL_REQUEST);
+		}
+	}
+
+	/* keep sched_scan only in case of 'any' trigger */
+	if (!(wowlan && wowlan->any))
+		ieee80211_sched_scan_cancel(local);
+
+	ieee80211_stop_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+
+	/* flush out all packets */
+	synchronize_net();
+
+	ieee80211_flush_queues(local, NULL, true);
+
+	local->quiescing = true;
+	/* make quiescing visible to timers everywhere */
+	mb();
+
+	flush_workqueue(local->workqueue);
+
+	/* Don't try to run timers while suspended. */
+	timer_delete_sync(&local->sta_cleanup);
+
+	 /*
+	 * Note that this particular timer doesn't need to be
+	 * restarted at resume.
+	 */
+	wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work);
+	timer_delete_sync(&local->dynamic_ps_timer);
+
+	local->wowlan = wowlan;
+	if (local->wowlan) {
+		int err;
+
+		/* Drivers don't expect to suspend while some operations like
+		 * authenticating or associating are in progress. It doesn't
+		 * make sense anyway to accept that, since the authentication
+		 * or association would never finish since the driver can't do
+		 * that on its own.
+		 * Thus, clean up in-progress auth/assoc first.
+		 */
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (!ieee80211_sdata_running(sdata))
+				continue;
+			if (sdata->vif.type != NL80211_IFTYPE_STATION)
+				continue;
+			ieee80211_mgd_quiesce(sdata);
+			/* If suspended during TX in progress, and wowlan
+			 * is enabled (connection will be active) there
+			 * can be a race where the driver is put out
+			 * of power-save due to TX and during suspend
+			 * dynamic_ps_timer is cancelled and TX packet
+			 * is flushed, leaving the driver in ACTIVE even
+			 * after resuming until dynamic_ps_timer puts
+			 * driver back in DOZE.
+			 */
+			if (sdata->u.mgd.associated &&
+			    sdata->u.mgd.powersave &&
+			     !(local->hw.conf.flags & IEEE80211_CONF_PS)) {
+				local->hw.conf.flags |= IEEE80211_CONF_PS;
+				ieee80211_hw_config(local, -1,
+						    IEEE80211_CONF_CHANGE_PS);
+			}
+		}
+
+		err = drv_suspend(local, wowlan);
+		if (err < 0) {
+			local->quiescing = false;
+			local->wowlan = false;
+			if (ieee80211_hw_check(hw, AMPDU_AGGREGATION)) {
+				lockdep_assert_wiphy(local->hw.wiphy);
+				list_for_each_entry(sta,
+						    &local->sta_list, list) {
+					clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
+				}
+			}
+			ieee80211_wake_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+			return err;
+		} else if (err > 0) {
+			WARN_ON(err != 1);
+			/* cfg80211 will call back into mac80211 to disconnect
+			 * all interfaces, allow that to proceed properly
+			 */
+			ieee80211_wake_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+			return err;
+		} else {
+			goto suspend;
+		}
+	}
+
+	/* remove all interfaces that were created in the driver */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			continue;
+		case NL80211_IFTYPE_STATION:
+			ieee80211_mgd_quiesce(sdata);
+			break;
+		default:
+			break;
+		}
+
+		wiphy_delayed_work_flush(local->hw.wiphy,
+					 &sdata->dec_tailroom_needed_wk);
+		drv_remove_interface(local, sdata);
+	}
+
+	/*
+	 * We disconnected on all interfaces before suspend, all channel
+	 * contexts should be released.
+	 */
+	WARN_ON(!list_empty(&local->chanctx_list));
+
+	/* stop hardware - this must stop RX */
+	ieee80211_stop_device(local, true);
+
+ suspend:
+	local->suspended = true;
+	/* need suspended to be visible before quiescing is false */
+	barrier();
+	local->quiescing = false;
+	local->suspending = false;
+
+	return 0;
+}
+
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */
+
+void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
+				    struct cfg80211_wowlan_wakeup *wakeup,
+				    gfp_t gfp)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp);
+}
+EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup);