Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 200 insertions, 0 deletions

diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
new file mode 100644
index 000000000..5a508d99e
--- /dev/null
+++ b/net/mac80211/pm.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Portions
+ * Copyright (C) 2020-2021, 2023-2024 Intel Corporation
+ */
+#include <net/mac80211.h>
+#include <net/rtnetlink.h>
+
+#include "ieee80211_i.h"
+#include "mesh.h"
+#include "driver-ops.h"
+#include "led.h"
+
+static void ieee80211_sched_scan_cancel(struct ieee80211_local *local)
+{
+	if (ieee80211_request_sched_scan_stop(local))
+		return;
+	cfg80211_sched_scan_stopped_locked(local->hw.wiphy, 0);
+}
+
+int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
+	struct sta_info *sta;
+
+	if (!local->open_count)
+		goto suspend;
+
+	local->suspending = true;
+	mb(); /* make suspending visible before any cancellation */
+
+	ieee80211_scan_cancel(local);
+
+	ieee80211_dfs_cac_cancel(local, NULL);
+
+	ieee80211_roc_purge(local, NULL);
+
+	ieee80211_del_virtual_monitor(local);
+
+	if (ieee80211_hw_check(hw, AMPDU_AGGREGATION) &&
+	    !(wowlan && wowlan->any)) {
+		lockdep_assert_wiphy(local->hw.wiphy);
+		list_for_each_entry(sta, &local->sta_list, list) {
+			set_sta_flag(sta, WLAN_STA_BLOCK_BA);
+			ieee80211_sta_tear_down_BA_sessions(
+					sta, AGG_STOP_LOCAL_REQUEST);
+		}
+	}
+
+	/* keep sched_scan only in case of 'any' trigger */
+	if (!(wowlan && wowlan->any))
+		ieee80211_sched_scan_cancel(local);
+
+	ieee80211_stop_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+
+	/* flush out all packets */
+	synchronize_net();
+
+	ieee80211_flush_queues(local, NULL, true);
+
+	local->quiescing = true;
+	/* make quiescing visible to timers everywhere */
+	mb();
+
+	flush_workqueue(local->workqueue);
+
+	/* Don't try to run timers while suspended. */
+	timer_delete_sync(&local->sta_cleanup);
+
+	 /*
+	 * Note that this particular timer doesn't need to be
+	 * restarted at resume.
+	 */
+	wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work);
+	timer_delete_sync(&local->dynamic_ps_timer);
+
+	local->wowlan = wowlan;
+	if (local->wowlan) {
+		int err;
+
+		/* Drivers don't expect to suspend while some operations like
+		 * authenticating or associating are in progress. It doesn't
+		 * make sense anyway to accept that, since the authentication
+		 * or association would never finish since the driver can't do
+		 * that on its own.
+		 * Thus, clean up in-progress auth/assoc first.
+		 */
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (!ieee80211_sdata_running(sdata))
+				continue;
+			if (sdata->vif.type != NL80211_IFTYPE_STATION)
+				continue;
+			ieee80211_mgd_quiesce(sdata);
+			/* If suspended during TX in progress, and wowlan
+			 * is enabled (connection will be active) there
+			 * can be a race where the driver is put out
+			 * of power-save due to TX and during suspend
+			 * dynamic_ps_timer is cancelled and TX packet
+			 * is flushed, leaving the driver in ACTIVE even
+			 * after resuming until dynamic_ps_timer puts
+			 * driver back in DOZE.
+			 */
+			if (sdata->u.mgd.associated &&
+			    sdata->u.mgd.powersave &&
+			     !(local->hw.conf.flags & IEEE80211_CONF_PS)) {
+				local->hw.conf.flags |= IEEE80211_CONF_PS;
+				ieee80211_hw_config(local, -1,
+						    IEEE80211_CONF_CHANGE_PS);
+			}
+		}
+
+		err = drv_suspend(local, wowlan);
+		if (err < 0) {
+			local->quiescing = false;
+			local->wowlan = false;
+			if (ieee80211_hw_check(hw, AMPDU_AGGREGATION)) {
+				lockdep_assert_wiphy(local->hw.wiphy);
+				list_for_each_entry(sta,
+						    &local->sta_list, list) {
+					clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
+				}
+			}
+			ieee80211_wake_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+			return err;
+		} else if (err > 0) {
+			WARN_ON(err != 1);
+			/* cfg80211 will call back into mac80211 to disconnect
+			 * all interfaces, allow that to proceed properly
+			 */
+			ieee80211_wake_queues_by_reason(hw,
+					IEEE80211_MAX_QUEUE_MAP,
+					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
+					false);
+			return err;
+		} else {
+			goto suspend;
+		}
+	}
+
+	/* remove all interfaces that were created in the driver */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			continue;
+		case NL80211_IFTYPE_STATION:
+			ieee80211_mgd_quiesce(sdata);
+			break;
+		default:
+			break;
+		}
+
+		wiphy_delayed_work_flush(local->hw.wiphy,
+					 &sdata->dec_tailroom_needed_wk);
+		drv_remove_interface(local, sdata);
+	}
+
+	/*
+	 * We disconnected on all interfaces before suspend, all channel
+	 * contexts should be released.
+	 */
+	WARN_ON(!list_empty(&local->chanctx_list));
+
+	/* stop hardware - this must stop RX */
+	ieee80211_stop_device(local, true);
+
+ suspend:
+	local->suspended = true;
+	/* need suspended to be visible before quiescing is false */
+	barrier();
+	local->quiescing = false;
+	local->suspending = false;
+
+	return 0;
+}
+
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */
+
+void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
+				    struct cfg80211_wowlan_wakeup *wakeup,
+				    gfp_t gfp)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+	cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp);
+}
+EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup);