Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 614 insertions, 0 deletions

diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
new file mode 100644
index 000000000..e1e1b7f82
--- /dev/null
+++ b/net/mac80211/ht.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HT handling
+ *
+ * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005-2006, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007-2010, Intel Corporation
+ * Copyright 2017	Intel Deutschland GmbH
+ * Copyright(c) 2020-2026 Intel Corporation
+ */
+
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+#include "rate.h"
+
+static void __check_htcap_disable(struct ieee80211_ht_cap *ht_capa,
+				  struct ieee80211_ht_cap *ht_capa_mask,
+				  struct ieee80211_sta_ht_cap *ht_cap,
+				  u16 flag)
+{
+	__le16 le_flag = cpu_to_le16(flag);
+	if (ht_capa_mask->cap_info & le_flag) {
+		if (!(ht_capa->cap_info & le_flag))
+			ht_cap->cap &= ~flag;
+	}
+}
+
+static void __check_htcap_enable(struct ieee80211_ht_cap *ht_capa,
+				  struct ieee80211_ht_cap *ht_capa_mask,
+				  struct ieee80211_sta_ht_cap *ht_cap,
+				  u16 flag)
+{
+	__le16 le_flag = cpu_to_le16(flag);
+
+	if ((ht_capa_mask->cap_info & le_flag) &&
+	    (ht_capa->cap_info & le_flag))
+		ht_cap->cap |= flag;
+}
+
+void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
+				     struct ieee80211_sta_ht_cap *ht_cap)
+{
+	struct ieee80211_ht_cap *ht_capa, *ht_capa_mask;
+	u8 *scaps, *smask;
+	int i;
+
+	if (!ht_cap->ht_supported)
+		return;
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_STATION:
+		ht_capa = &sdata->u.mgd.ht_capa;
+		ht_capa_mask = &sdata->u.mgd.ht_capa_mask;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ht_capa = &sdata->u.ibss.ht_capa;
+		ht_capa_mask = &sdata->u.ibss.ht_capa_mask;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return;
+	}
+
+	scaps = (u8 *)(&ht_capa->mcs.rx_mask);
+	smask = (u8 *)(&ht_capa_mask->mcs.rx_mask);
+
+	/* NOTE:  If you add more over-rides here, update register_hw
+	 * ht_capa_mod_mask logic in main.c as well.
+	 * And, if this method can ever change ht_cap.ht_supported, fix
+	 * the check in ieee80211_add_ht_ie.
+	 */
+
+	/* check for HT over-rides, MCS rates first. */
+	for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+		u8 m = smask[i];
+		ht_cap->mcs.rx_mask[i] &= ~m; /* turn off all masked bits */
+		/* Add back rates that are supported */
+		ht_cap->mcs.rx_mask[i] |= (m & scaps[i]);
+	}
+
+	/* Force removal of HT-40 capabilities? */
+	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
+			      IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
+			      IEEE80211_HT_CAP_SGI_40);
+
+	/* Allow user to disable SGI-20 (SGI-40 is handled above) */
+	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
+			      IEEE80211_HT_CAP_SGI_20);
+
+	/* Allow user to disable the max-AMSDU bit. */
+	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
+			      IEEE80211_HT_CAP_MAX_AMSDU);
+
+	/* Allow user to disable LDPC */
+	__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
+			      IEEE80211_HT_CAP_LDPC_CODING);
+
+	/* Allow user to enable 40 MHz intolerant bit. */
+	__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
+			     IEEE80211_HT_CAP_40MHZ_INTOLERANT);
+
+	/* Allow user to enable TX STBC bit  */
+	__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
+			     IEEE80211_HT_CAP_TX_STBC);
+
+	/* Allow user to configure RX STBC bits */
+	if (ht_capa_mask->cap_info & cpu_to_le16(IEEE80211_HT_CAP_RX_STBC))
+		ht_cap->cap |= le16_to_cpu(ht_capa->cap_info) &
+					IEEE80211_HT_CAP_RX_STBC;
+
+	/* Allow user to decrease AMPDU factor */
+	if (ht_capa_mask->ampdu_params_info &
+	    IEEE80211_HT_AMPDU_PARM_FACTOR) {
+		u8 n = ht_capa->ampdu_params_info &
+		       IEEE80211_HT_AMPDU_PARM_FACTOR;
+		if (n < ht_cap->ampdu_factor)
+			ht_cap->ampdu_factor = n;
+	}
+
+	/* Allow the user to increase AMPDU density. */
+	if (ht_capa_mask->ampdu_params_info &
+	    IEEE80211_HT_AMPDU_PARM_DENSITY) {
+		u8 n = (ht_capa->ampdu_params_info &
+			IEEE80211_HT_AMPDU_PARM_DENSITY)
+			>> IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT;
+		if (n > ht_cap->ampdu_density)
+			ht_cap->ampdu_density = n;
+	}
+}
+
+
+bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata,
+				       const struct ieee80211_sta_ht_cap *own_cap_ptr,
+				       const struct ieee80211_ht_cap *ht_cap_ie,
+				       struct link_sta_info *link_sta)
+{
+	struct sta_info *sta = link_sta->sta;
+	struct ieee80211_sta_ht_cap ht_cap, own_cap;
+	u8 ampdu_info, tx_mcs_set_cap;
+	int i, max_tx_streams;
+	bool changed;
+
+	memset(&ht_cap, 0, sizeof(ht_cap));
+
+	if (!ht_cap_ie || !own_cap_ptr->ht_supported)
+		goto apply;
+
+	/* NDI station are using the capabilities from the NMI station */
+	if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_NAN_DATA))
+		return 0;
+
+	ht_cap.ht_supported = true;
+
+	own_cap = *own_cap_ptr;
+
+	/*
+	 * If user has specified capability over-rides, take care
+	 * of that if the station we're setting up is the AP or TDLS peer that
+	 * we advertised a restricted capability set to. Override
+	 * our own capabilities and then use those below.
+	 */
+	if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+	    sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		ieee80211_apply_htcap_overrides(sdata, &own_cap);
+
+	/*
+	 * The bits listed in this expression should be
+	 * the same for the peer and us, if the station
+	 * advertises more then we can't use those thus
+	 * we mask them out.
+	 */
+	ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) &
+		(own_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING |
+				 IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+				 IEEE80211_HT_CAP_GRN_FLD |
+				 IEEE80211_HT_CAP_SGI_20 |
+				 IEEE80211_HT_CAP_SGI_40 |
+				 IEEE80211_HT_CAP_DSSSCCK40));
+
+	/*
+	 * The STBC bits are asymmetric -- if we don't have
+	 * TX then mask out the peer's RX and vice versa.
+	 */
+	if (!(own_cap.cap & IEEE80211_HT_CAP_TX_STBC))
+		ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC;
+	if (!(own_cap.cap & IEEE80211_HT_CAP_RX_STBC))
+		ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC;
+
+	ampdu_info = ht_cap_ie->ampdu_params_info;
+	ht_cap.ampdu_factor =
+		ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
+	ht_cap.ampdu_density =
+		(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
+
+	/* own MCS TX capabilities */
+	tx_mcs_set_cap = own_cap.mcs.tx_params;
+
+	/* Copy peer MCS TX capabilities, the driver might need them. */
+	ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params;
+
+	/* can we TX with MCS rates? */
+	if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
+		goto apply;
+
+	/* Counting from 0, therefore +1 */
+	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
+		max_tx_streams =
+			((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+				>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
+	else
+		max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
+
+	/*
+	 * 802.11n-2009 20.3.5 / 20.6 says:
+	 * - indices 0 to 7 and 32 are single spatial stream
+	 * - 8 to 31 are multiple spatial streams using equal modulation
+	 *   [8..15 for two streams, 16..23 for three and 24..31 for four]
+	 * - remainder are multiple spatial streams using unequal modulation
+	 */
+	for (i = 0; i < max_tx_streams; i++)
+		ht_cap.mcs.rx_mask[i] =
+			own_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
+
+	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
+		for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
+		     i < IEEE80211_HT_MCS_MASK_LEN; i++)
+			ht_cap.mcs.rx_mask[i] =
+				own_cap.mcs.rx_mask[i] &
+					ht_cap_ie->mcs.rx_mask[i];
+
+	/* handle MCS rate 32 too */
+	if (own_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
+		ht_cap.mcs.rx_mask[32/8] |= 1;
+
+	/* set Rx highest rate */
+	ht_cap.mcs.rx_highest = ht_cap_ie->mcs.rx_highest;
+
+	if (ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU)
+		link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_7935;
+	else
+		link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_3839;
+
+	ieee80211_sta_recalc_aggregates(&sta->sta);
+
+ apply:
+	changed = memcmp(&link_sta->pub->ht_cap, &ht_cap, sizeof(ht_cap));
+
+	memcpy(&link_sta->pub->ht_cap, &ht_cap, sizeof(ht_cap));
+
+	if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+	    sta->sdata->vif.type == NL80211_IFTYPE_NAN ||
+	    sta->sdata->vif.type == NL80211_IFTYPE_NAN_DATA) {
+		enum ieee80211_smps_mode smps_mode;
+
+		switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS)
+				>> IEEE80211_HT_CAP_SM_PS_SHIFT) {
+		case WLAN_HT_CAP_SM_PS_INVALID:
+		case WLAN_HT_CAP_SM_PS_STATIC:
+			smps_mode = IEEE80211_SMPS_STATIC;
+			break;
+		case WLAN_HT_CAP_SM_PS_DYNAMIC:
+			smps_mode = IEEE80211_SMPS_DYNAMIC;
+			break;
+		case WLAN_HT_CAP_SM_PS_DISABLED:
+			smps_mode = IEEE80211_SMPS_OFF;
+			break;
+		}
+
+		if (smps_mode != link_sta->pub->smps_mode)
+			changed = true;
+		link_sta->pub->smps_mode = smps_mode;
+	} else {
+		link_sta->pub->smps_mode = IEEE80211_SMPS_OFF;
+	}
+
+	return changed;
+}
+
+void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta,
+					 enum ieee80211_agg_stop_reason reason)
+{
+	int i;
+
+	lockdep_assert_wiphy(sta->local->hw.wiphy);
+
+	for (i = 0; i <  IEEE80211_NUM_TIDS; i++)
+		__ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT,
+					       WLAN_REASON_QSTA_LEAVE_QBSS,
+					       reason != AGG_STOP_DESTROY_STA &&
+					       reason != AGG_STOP_PEER_REQUEST);
+
+	for (i = 0; i <  IEEE80211_NUM_TIDS; i++)
+		__ieee80211_stop_tx_ba_session(sta, i, reason);
+
+	/*
+	 * In case the tear down is part of a reconfigure due to HW restart
+	 * request, it is possible that the low level driver requested to stop
+	 * the BA session, so handle it to properly clean tid_tx data.
+	 */
+	if(reason == AGG_STOP_DESTROY_STA) {
+		wiphy_work_cancel(sta->local->hw.wiphy, &sta->ampdu_mlme.work);
+
+		for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
+			struct tid_ampdu_tx *tid_tx =
+				rcu_dereference_protected_tid_tx(sta, i);
+
+			if (!tid_tx)
+				continue;
+
+			if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state))
+				ieee80211_stop_tx_ba_cb(sta, i, tid_tx);
+		}
+	}
+}
+
+void ieee80211_ba_session_work(struct wiphy *wiphy, struct wiphy_work *work)
+{
+	struct sta_info *sta =
+		container_of(work, struct sta_info, ampdu_mlme.work);
+	struct tid_ampdu_tx *tid_tx;
+	bool blocked;
+	int tid;
+
+	lockdep_assert_wiphy(sta->local->hw.wiphy);
+
+	/* When this flag is set, new sessions should be blocked. */
+	blocked = test_sta_flag(sta, WLAN_STA_BLOCK_BA);
+
+	for (tid = 0; tid < IEEE80211_NUM_TIDS; tid++) {
+		if (test_and_clear_bit(tid, sta->ampdu_mlme.tid_rx_timer_expired))
+			__ieee80211_stop_rx_ba_session(
+				sta, tid, WLAN_BACK_RECIPIENT,
+				WLAN_REASON_QSTA_TIMEOUT, true);
+
+		if (test_and_clear_bit(tid,
+				       sta->ampdu_mlme.tid_rx_stop_requested))
+			__ieee80211_stop_rx_ba_session(
+				sta, tid, WLAN_BACK_RECIPIENT,
+				WLAN_REASON_UNSPECIFIED, true);
+
+		if (!blocked &&
+		    test_and_clear_bit(tid,
+				       sta->ampdu_mlme.tid_rx_manage_offl))
+			__ieee80211_start_rx_ba_session(sta, 0, 0, 0, 1, tid,
+							IEEE80211_MAX_AMPDU_BUF_HT,
+							false, true, false, 0);
+
+		if (test_and_clear_bit(tid + IEEE80211_NUM_TIDS,
+				       sta->ampdu_mlme.tid_rx_manage_offl))
+			__ieee80211_stop_rx_ba_session(
+				sta, tid, WLAN_BACK_RECIPIENT,
+				0, false);
+
+		spin_lock_bh(&sta->lock);
+
+		tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
+		if (!blocked && tid_tx) {
+			struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
+			struct ieee80211_sub_if_data *sdata =
+				vif_to_sdata(txqi->txq.vif);
+			struct fq *fq = &sdata->local->fq;
+
+			spin_lock_bh(&fq->lock);
+
+			/* Allow only frags to be dequeued */
+			set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
+
+			if (!skb_queue_empty(&txqi->frags)) {
+				/* Fragmented Tx is ongoing, wait for it to
+				 * finish. Reschedule worker to retry later.
+				 */
+
+				spin_unlock_bh(&fq->lock);
+				spin_unlock_bh(&sta->lock);
+
+				/* Give the task working on the txq a chance
+				 * to send out the queued frags
+				 */
+				synchronize_net();
+
+				wiphy_work_queue(sdata->local->hw.wiphy, work);
+				return;
+			}
+
+			spin_unlock_bh(&fq->lock);
+
+			/*
+			 * Assign it over to the normal tid_tx array
+			 * where it "goes live".
+			 */
+
+			sta->ampdu_mlme.tid_start_tx[tid] = NULL;
+			/* could there be a race? */
+			if (sta->ampdu_mlme.tid_tx[tid])
+				kfree(tid_tx);
+			else
+				ieee80211_assign_tid_tx(sta, tid, tid_tx);
+			spin_unlock_bh(&sta->lock);
+
+			ieee80211_tx_ba_session_handle_start(sta, tid);
+			continue;
+		}
+		spin_unlock_bh(&sta->lock);
+
+		tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+		if (!tid_tx)
+			continue;
+
+		if (!blocked &&
+		    test_and_clear_bit(HT_AGG_STATE_START_CB, &tid_tx->state))
+			ieee80211_start_tx_ba_cb(sta, tid, tid_tx);
+		if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state))
+			__ieee80211_stop_tx_ba_session(sta, tid,
+						       AGG_STOP_LOCAL_REQUEST);
+		if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state))
+			ieee80211_stop_tx_ba_cb(sta, tid, tid_tx);
+	}
+}
+
+void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
+			  const u8 *da, u16 tid,
+			  u16 initiator, u16 reason_code,
+			  bool use_ndp)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ieee80211_mgmt *mgmt;
+	u16 params;
+
+	skb = dev_alloc_skb(IEEE80211_MIN_ACTION_SIZE(delba) +
+			    local->hw.extra_tx_headroom);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+	mgmt = ieee80211_mgmt_ba(skb, da, sdata);
+
+	skb_put(skb, 2 + sizeof(mgmt->u.action.delba));
+
+	mgmt->u.action.category = WLAN_CATEGORY_BACK;
+	mgmt->u.action.action_code = use_ndp ?
+		WLAN_ACTION_NDP_DELBA : WLAN_ACTION_DELBA;
+	params = (u16)(initiator << 11); 	/* bit 11 initiator */
+	params |= (u16)(tid << 12); 		/* bit 15:12 TID number */
+
+	mgmt->u.action.delba.params = cpu_to_le16(params);
+	mgmt->u.action.delba.reason_code = cpu_to_le16(reason_code);
+
+	ieee80211_tx_skb(sdata, skb);
+}
+
+void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
+			     struct sta_info *sta,
+			     struct ieee80211_mgmt *mgmt, size_t len)
+{
+	u16 tid, params;
+	u16 initiator;
+
+	params = le16_to_cpu(mgmt->u.action.delba.params);
+	tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
+	initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
+
+	ht_dbg_ratelimited(sdata, "delba from %pM (%s) tid %d reason code %d\n",
+			   mgmt->sa, initiator ? "initiator" : "recipient",
+			   tid,
+			   le16_to_cpu(mgmt->u.action.delba.reason_code));
+
+	if (initiator == WLAN_BACK_INITIATOR)
+		__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0,
+					       true);
+	else
+		__ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST);
+}
+
+enum nl80211_smps_mode
+ieee80211_smps_mode_to_smps_mode(enum ieee80211_smps_mode smps)
+{
+	switch (smps) {
+	case IEEE80211_SMPS_OFF:
+		return NL80211_SMPS_OFF;
+	case IEEE80211_SMPS_STATIC:
+		return NL80211_SMPS_STATIC;
+	case IEEE80211_SMPS_DYNAMIC:
+		return NL80211_SMPS_DYNAMIC;
+	default:
+		return NL80211_SMPS_OFF;
+	}
+}
+
+int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+			       enum ieee80211_smps_mode smps, const u8 *da,
+			       const u8 *bssid, int link_id)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ieee80211_mgmt *action_frame;
+	struct ieee80211_tx_info *info;
+	u8 status_link_id = link_id < 0 ? 0 : link_id;
+
+	skb = dev_alloc_skb(IEEE80211_MIN_ACTION_SIZE(ht_smps) +
+			    local->hw.extra_tx_headroom);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+	action_frame = skb_put_zero(skb, IEEE80211_MIN_ACTION_SIZE(ht_smps));
+	memcpy(action_frame->da, da, ETH_ALEN);
+	memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN);
+	memcpy(action_frame->bssid, bssid, ETH_ALEN);
+	action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+						  IEEE80211_STYPE_ACTION);
+	action_frame->u.action.category = WLAN_CATEGORY_HT;
+	action_frame->u.action.action_code = WLAN_HT_ACTION_SMPS;
+	switch (smps) {
+	case IEEE80211_SMPS_AUTOMATIC:
+	case IEEE80211_SMPS_NUM_MODES:
+		WARN_ON(1);
+		smps = IEEE80211_SMPS_OFF;
+		fallthrough;
+	case IEEE80211_SMPS_OFF:
+		action_frame->u.action.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_DISABLED;
+		break;
+	case IEEE80211_SMPS_STATIC:
+		action_frame->u.action.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_STATIC;
+		break;
+	case IEEE80211_SMPS_DYNAMIC:
+		action_frame->u.action.ht_smps.smps_control =
+				WLAN_HT_SMPS_CONTROL_DYNAMIC;
+		break;
+	}
+
+	/* we'll do more on status of this frame */
+	info = IEEE80211_SKB_CB(skb);
+	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	/* we have 13 bits, and need 6: link_id 4, smps 2 */
+	info->status_data = IEEE80211_STATUS_TYPE_SMPS |
+			    u16_encode_bits(status_link_id << 2 | smps,
+					    IEEE80211_STATUS_SUBDATA_MASK);
+	ieee80211_tx_skb_tid(sdata, skb, 7, link_id);
+
+	return 0;
+}
+
+void ieee80211_request_smps(struct ieee80211_vif *vif, unsigned int link_id,
+			    enum ieee80211_smps_mode smps_mode)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_link_data *link;
+
+	if (WARN_ON_ONCE(vif->type != NL80211_IFTYPE_STATION))
+		return;
+
+	rcu_read_lock();
+	link = rcu_dereference(sdata->link[link_id]);
+	if (WARN_ON(!link))
+		goto out;
+
+	trace_api_request_smps(sdata->local, sdata, link, smps_mode);
+
+	if (link->u.mgd.driver_smps_mode == smps_mode)
+		goto out;
+
+	link->u.mgd.driver_smps_mode = smps_mode;
+	wiphy_work_queue(sdata->local->hw.wiphy,
+			 &link->u.mgd.request_smps_work);
+out:
+	rcu_read_unlock();
+}
+/* this might change ... don't want non-open drivers using it */
+EXPORT_SYMBOL_GPL(ieee80211_request_smps);
+
+void ieee80211_ht_handle_chanwidth_notif(struct ieee80211_local *local,
+					 struct ieee80211_sub_if_data *sdata,
+					 struct sta_info *sta,
+					 struct link_sta_info *link_sta,
+					 u8 chanwidth, enum nl80211_band band)
+{
+	enum ieee80211_sta_rx_bandwidth max_bw;
+	struct sta_opmode_info sta_opmode = {
+		.changed = STA_OPMODE_MAX_BW_CHANGED,
+	};
+	struct ieee80211_link_data *link;
+
+	lockdep_assert_wiphy(local->hw.wiphy);
+
+	link = sdata_dereference(sdata->link[link_sta->link_id], sdata);
+	if (WARN_ON(!link))
+		return;
+
+	if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ)
+		max_bw = IEEE80211_STA_RX_BW_20;
+	else
+		max_bw = IEEE80211_STA_RX_BW_MAX;
+
+	/* set op_mode_bw and recalc sta bw */
+	link_sta->op_mode_bw = max_bw;
+
+	if (!ieee80211_link_sta_update_rc_bw(link, link_sta))
+		return;
+
+	sta_opmode.bw = ieee80211_sta_rx_bw_to_chan_width(link_sta->pub->bandwidth);
+
+	cfg80211_sta_opmode_change_notify(sdata->dev, sta->addr,
+					  &sta_opmode, GFP_KERNEL);
+}